[ edited excerpt from developer's README ]
The MPEG4IP project provides a standards-based system for encoding,
streaming, and playing MPEG-4 encoded audio and video. To achieve
this we've integrated a number of existing open source packages,
and also created some original code to fill in the gaps.
Please note this project is intended for developers who are interested
in MPEG-4 audio and video, and Internet streaming. It is not intended
for end-users. Please read all the legal information in the file
"COPYING"!
There is also a project web site at http://www.mpeg4ip.net/ that
has some general information on MPEG4IP.
WWW: http://mpeg4ip.sourceforge.net/
===> The following configuration options are available for mpeg4ip-1.6.1_46:
DOCS=on: Build and/or install documentation
IPV6=on: IPv6 protocol support
NAS=off: Network Audio System support
OPTIMIZED_CFLAGS=off: Use extra compiler optimizations
XVID=on: Xvid MPEG-4 video codec support
===> Use 'make config' to modify these settings
Mark DEPRECATED with expiration date 2019-06-15
Rationale:
There has been no active development for several years. The port also
depends on other outdated, unmaintained code, most notably ffmpeg0
which is also scheduled for removal on 2019-06-15.
The functionality provided by this port is available through
multimedia/ffmpeg, which is actively maintained.
PR: 238093
Reported by: tobik
Un-break build with lame 3.100
Details:
In recent lame versions, the arrays samplerate_table and
bitrate_table are internal and must be accessed by provided
functions lame_get_bitrate() and lame_get_samplerate()
Cleanup $() variables in ports Makefiles.
Mostly replace with ${}, but sometime, replace with $$() because it is
what was intended in the first place. (I think.)
Sponsored by: Absolight
Move Mk/bsd.gnome.mk and Mk/bsd.mate.mk to Mk/Uses/.
To use the GNOME or MATE components activate it by adding gnome
or mate to USES. The usage of USE_GNOME/INSTALL_ICONS and for
example GLIB_SCHEMAS has stayed the same.
Like with USES, the use of USE_GNOME and so after bsd.port.pre.mk
is now forbidden. And adapt ports that where still doing that.
Exp-runs done by: antoine@
PR: 205432
Reviewed by: antoine@, mat@
Approved by: portmgr (antoine@)
Differential Revision: https://reviews.freebsd.org/D3653
multimedia/{lib}x264: Update to 0.144.2533 and major refactor
- Update to 0.144.2533 (from upstream stable branch) [1]
- Switch x264 and libx264 ports to master/slave ports respectively
- Bump PORTREVISION for dependent ports as the shared library version
has changed.
multimedia/x264:
- Clean up and update "updating instructions" in Makefile header
- Tweak COMMENT
- Only LIB_DEPENDS on libx264 and add PLIST_FILES if this isn't the
libx264 port.
- Allow COMMENT, USES, OPTIONS_*, CONFIGURE_ARGS to be overriden in
libx264 port.
(Only the first 15 lines of the commit message are shown above )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
multimedia/x264: General overhaul
- Split x264 into two ports: the CLI application (x264), and the library
(libx264). This will allow x264 to use lavf and friends from ffmpeg for
decoding and demuxing while preventing a circular dependency between the
two: x264 can depend on ffmpeg, but ffmpeg will depend on libx264 rather
than x264.
- Add the LAVF option to the CLI port, making the dependency on ffmpeg
optional.
- Update to 0.142.2455.
- Amend fixes to local patches so that they can apply to the new upstream
files.
- Provide the git revision and other version information to the build
environment, allowing the CLI binary to display this information (like the
Windows builds).
- Remove unsupported build options (X11_OUTPUT).
- Ensure that the library and CLI ports each have the appropriate options.
- Add notes for future contributors who wish to update the ports.
- Bump PORTREVISION for all dependent ports.
PR: 187805
Differential Revision: https://reviews.freebsd.org/D1159
Submitted by: Andrew Berg <aberg010@my.hennepintech.edu>
Approved by: koobs (maintainer, mentor)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
(Only the first 15 lines of the commit message are shown above )
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- Use getopt_long from libc, rather than the bundled implementation.
The bundled implementation fails to compile.
- Bump portrevision.
Approved by: maintainer timeout (multimedia@, 14 days)
- update audio/lame to 3.98.4
- use ?= for the portrevision of a master port to make it possible to
change it in a slave port which depends upon lame
- bump portrevisions of ports which depend upon lame
- done via a semi-automated way (manual review and fixup)
- I tried to take care to not bump ports which only depend optionaly on
lame (with a default of no dependency)
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Get it links with -lavcodec instead of libavcodec.a to fix the runtime of
mp4player and gmp4player to run video file. Bump the PORTREVISION.
Reported by: Heiko Recktenwald <uzs106@uni-bonn.de>
-Fix the build with new x264. [1]
-Remove all X11BASE and FreeBSD 4.x stuff.
Reported by: Heiko Recktenwald <uzs106@uni-bonn.de> [1]
Obtained from: Gentoo CVS [1]
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
