23:29 Daniel Engberg (diizzy) 

net-im/libnice: Remove libtool as dependency

Not used in project

Approved by:	portmgr (blanket)

    ba96f98

14:20 Dima Panov (fluffy) 

net-im/libnice: unbreak with GUPNP enabled (+)

net/gupnp-igd12 rest in peace, move to net/gupnp-igd

Reported by:	poudriere failure

    c6ed5eb

21:39 Po-Chuan Hsieh (sunpoet) 

net-im/libnice: Change LIB_DEPENDS from gupnp-igd to gupnp-igd12

- Bump PORTREVISION for dependency change

    6abc1ec

09:33 Gleb Popov (arrowd) 

net-im/libnice{-gst1,}: Update to 0.1.21

Sponsored by:	Serenity Cybersecurity, LLC

    d3cc197

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

net-im: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alberto Villa <avilla@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>
  *  Andrew Lewis <freeghb@gmail.com>
  *  Andrey Akhmichin <sepulkarium45@yahoo.com>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@freebsd.org>
  *  Brendan Molloy <brendan+freebsd@bbqsrc.net>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eugene Grosbein <eugen@FreeBSD.org>
  *  Florent Thoumie <flz@FreeBSD.org>
  *  Frank Altpeter <frank@altpeter.de>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffrey Mainland <mainland@apeiron.net>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Prather
  *  Jonathan Chen <jonc@chen.org.nz>
  *  Joseph S. Atkinson <jsatkinson@embarqmail.com>
  *  Junji NAKANISHI <jun-g@daemonfreaks.com>
  *  Kelly Cochran <kcochran@trolans.net>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kris Moore <kmoore@freebsd.org>
  *  Lars Eggert <lars.eggert@gmx.net>
  *  Marc Bruenink
  *  Matthew West <mwest@uct.ac.za>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Max E. Kuznecov <mek@mek.uz.ua>
  *  Meethune Bhowmick <meethune@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikolay Pavlov <qpadla@gmail.com>
  *  Oleg Ginzburg (olevole@olevole.ru)
  *  Pavel Andreev
  *  Saulius Menkevicius <bob@nulis.lt>
  *  SeaD
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  Yuri <yuri@tsoft.com>
  *  Yuri Victorovich
  *  Yuri Victorovich <yuri@rawbw.com>
  *  dd
  *  gahr
  *  gnome@freebsd.org
  *  jodocus <jodocus@jodocus.org>
  *  mph
  *  trasz
  *  vsevolod

With hat:	portmgr

    103413d

20:54 Baptiste Daroussin (bapt) 

net-im/libnice*: update to 0.1.19

While here remove gtk_doc to be consistent with most of the other
gnome ports

    9c9ea91

08:03 Tobias C. Berner (tcberner) 

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

    ca3f925

16:52 Jan Beich (jbeich) 

net-im/libnice-gst1: drop unused Meson options after 3367f62c42b8

meson.build:1:0: ERROR: Unknown options: "gst_version"

PR:		259080
Reported by:	antoine (via exp-run)
Regressed by:	https://github.com/mesonbuild/meson/commit/dbf2ace6ca1c

    940784d

15:01 Tobias Kortkamp (tobik) 

net-im/libnice-gst1: Fix dependencies and make sure QA passes

LIB_DEPENDS is overwritten later in the master port, so libnice is
never added as a dependency.  Setting MAINTAINER is redundant since
it is overwritten later too.

While here amend the plist to exclude unwanted files.

Reported by:	portscan (overwritten variables)

    74d6d05

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

14:58 jsm 

net-im/libnice update to 0.1.18

PR: 247547
Submitted by: swills
Approved by: maintainer timeout

 

16:49 bapt 

Remove libnice-gst010 it is not depended on and support for gstreamer 0.10
has been dropped upstream

 

09:40 amdmi3 

- Switch to USES=localbase
- Update WWW

Approved by:	portmgr blanket

 

13:34 tobik 

net-im: Add missing USES={gnome,xorg}

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

13:18 mat 

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

 

07:40 ak 

- Remove empty lines after .include <bsd.port.mk>

Approved by:	portmgr blanket

 

14:44 kwm 

Update libnice to 0.1.13.

 

17:02 kwm 

Update libnice to 0.1.8.

Enable introspection support.

 

11:49 kwm 

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
ported a few that can't be installed via this way.
The old gnome-utils and gnome-games ports where split up into single ports
and where converted to meta-ports.
gnome-terminal requires a UTF-8 locale to run, gdm handles this already, but
if you use startx you need to do this yourself.

Upgrade instructions:

Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
    guile gcalctool gnome-media libgnomekbd
# pkg delete gnome-screensaver gnome-applets bug-buddy evolution-exchange \
    evolution-webcal gnome-system-tools seahorse-plugins gnome-control-center

For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3

For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3

We are currently aware of two issues. The first issue is a bug in the
file monitoring code in the glib20 port. This bug causes glib programs
to crash when files in a monitored directory are added or removed.
Upstream is aware of the problem, but since the problem is quite complex
there is no solution yet. This problem isn't restricted to BSD.

The second issue is that on certain video cards totem will display a
purple/pink overlay on the video. It not clear yet where the issues
comes from.

Major thanks goes to Gustau Perez for being a driving force behind getting
GNOME 3 up to speed again. Also thanks to Antoine Brodin for running the
exp-runs.

This update was also made possible by:
	Joe Maloney
	Kris Moore
	Beeblebrox
	Ryan Lortie
	Antoine Jacoutot
	and everyone I missed

 

15:47 tijl 

Convert to USES=libtool and add INSTALL_TARGET=install-strip

Obtained from:	gnome-dev

 

18:00 miwi 

- Stage support
- Convert to USES

 

22:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
net-im)

 

07:35 ak 

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

 

14:20 bapt 

Finish converting the whole ports tree to USES=pkgconfig

 

12:21 miwi 

- Add a backup mirror freedesktop.org

Approved by:	kvm

 

10:51 kwm 

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

 

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

19:20 kwm 

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

16:32 marcus 

Restore some of nork's commit so that additional files are touched after
configure.  This is known to fix some issues on ZFS builds.

Reported by:    fluffy

18:26 marcus 

Bump PORTREVISION again for those that may have built library version 9.

18:19 marcus 

Try another approach to fixing the libtool issue.  This was tested on my amd64
-CURRENT machine, so it should work with others, too.

00:19 marcus 

Make sure that all of the files are up-to-date to prevent auto* from
running.

07:34 ade 

Sync to new bsd.autotools.mk

06:21 nork 

Bump PORTREVISION by previous commit.
Because libnice invoked autotools installed libnice.pc
to $PREFIX/lib/pkgconfig/ instead of $PREFIX/libdata/pkgconfig.

06:18 nork 

To not invoke autotools, so ${TOUCH} some autotools related files.

00:25 marcus 

Update to 0.0.13.

22:52 marcus 

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:             147257

07:14 marcus 

Update to 0.0.12.

21:29 marcus 

Update to 0.0.11.

23:24 marcus 

Update to 0.0.10.

21:45 marcus 

Add another build fix for 6.X.

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

20:44 marcus 

Update to 0.0.9.

20:21 marcus 

Fix the build on 6.X.

Reported by:    pointyhat via pav

23:43 marcus 

Update to 0.0.8.

05:45 marcus 

Update to 0.0.6.

17:24 marcus 

Update to 0.0.5.

05:11 marcus 

Add libnice, a library and a transmitter that does ICE (as defined in the
ICE-19 draft), as well as Google Talk and MSN compatible ICE-like protocols.