Port details |
- py-ncclient Python library for NETCONF clients
- 0.6.15 net-mgmt =3 0.6.15Version of this port present on the latest quarterly branch.
- Maintainer: sergey@akhmatov.ru
- Port Added: 2018-04-05 03:45:15
- Last Update: 2024-05-26 07:52:54
- Commit Hash: dd9ca5c
- People watching this port, also watch:: bingrep, check_ssl_cert, newsboat, xrdp, pcpustat
- Also Listed In: python
- License: APACHE20
- WWW:
- https://github.com/ncclient/ncclient
- Description:
- ncclient is a Python library for NETCONF clients. It aims to offer
an intuitive API that sensibly maps the XML-encoded nature of
NETCONF to Python constructs and idioms, and make writing
network-management scripts easier. Other key features are:
- Supports all operations and capabilities defined in RFC 4741.
- Request pipelining.
- Asynchronous RPC requests.
- Keeping XML out of the way unless really needed.
- Extensible. New transport mappings and capabilities/operations
can be easily added.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}ncclient>0:net-mgmt/py-ncclient@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/net-mgmt/py-ncclient/ && make install clean
- To add the package, run one of these commands:
- pkg install net-mgmt/py-ncclient
- pkg install py39-ncclient
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-ncclient listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-ncclient
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1714548629
SHA256 (ncclient-0.6.15.tar.gz) = 6757cb41bc9160dfe47f22f5de8cf2f1adf22f27463fb50453cc415ab96773d8
SIZE (ncclient-0.6.15.tar.gz) = 634885
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-lxml>=3.3.0 : devel/py-lxml@py39
- py39-paramiko>=1.15.0 : security/py-paramiko@py39
- py39-six>0 : devel/py-six@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- net-mgmt/py-junos-eznc
- net-mgmt/py-napalm
Configuration Options:
- No options to configure
- Options name:
- net-mgmt_py-ncclient
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.6.15 26 May 2024 07:52:54 |
Kai Knoblich (kai) |
net-mgmt/py-ncclient: Update to 0.6.15
Changelog since 0.6.13:
https://github.com/ncclient/ncclient/compare/v0.6.13...v0.6.15
PR: 278678
Approved by: maintainer timeout (3+ weeks) |
0.6.13_1 20 May 2024 10:33:03 |
Vsevolod Stakhov (vsevolod) |
security/libsodium: update to 1.0.19, bump dependent ports
PR: 278259
Reported by: Andrey Korobkov <alster-vinterdalen.se> |
0.6.13 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.6.13 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.6.13 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.6.13 21 Jul 2022 15:42:07 |
Kai Knoblich (kai) |
net-mgmt/py-ncclient: Update to 0.6.13
Changelog since 0.6.10:
https://github.com/ncclient/ncclient/compare/v0.6.10...v0.6.13
PR: 265270
Approved by: Sergey Akhmatov (maintainer) |
0.6.10 07 Apr 2021 08:09:01 |
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
0.6.10 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.6.10 08 Mar 2021 01:21:51 |
nc |
net-mgmt/py-ncclient: Update to 0.6.10
Changes: https://github.com/ncclient/ncclient/releases/tag/v0.6.10
PR: 254095
Submitted by: Sergey Akhmatov <sergey AT akhmatov DOT ru> (maintainer) |
0.6.7 09 Jan 2021 14:33:53 |
rene |
Remove py27_*_DEPENDS lines from ports using Python 3.6+ only.
While here adjust a related comment in graphics/py-traitsui |
0.6.7 28 Dec 2020 23:02:15 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.6.7 18 Jan 2020 18:27:02 |
sunpoet |
Update to 0.6.7
Changes: https://github.com/ncclient/ncclient/releases
PR: 243424
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer) |
0.6.6 02 Jun 2019 21:29:47 |
kai |
net-mgmt/py-ncclient: Update to 0.6.6
Changelog:
* Read ssh timeout from config file if not specified in method call
* Tox support
* Huge XML tree parser support
* Adding optional bind address to connect
https://github.com/ncclient/ncclient/releases/tag/v0.6.6
PR: 238247
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer) |
0.6.4 10 Apr 2019 07:52:19 |
kai |
net-mgmt/py-ncclient: Update to 0.6.4
While I'm here:
* Pet portlint
Changelog:
* Pin selectors2 to Python versions <= 3.4 (and remove the now obsolete
patch-requirements.txt)
* Fix config examples to actually use the nc namespace
* Fix: Correctly set port for paramiko when using ssh_config file
* Test: Add test to check ProxyCommand uses correct port
* Update commits for py3
* Enhance Alcatel-Lucent -support
* Juniper RPC: Allow specifying format in CompareConfiguration
* Parsing of NETCONF 1.1 frames no longer decodes each chunk of bytes...
* Fix filter in create_subscription
* Validate 'with-defaults' mode based on supported modes advertised in
capability URI
PR: 237154
Submitted by: Sergey Akhmatov (maintainer)
Approved by: mentors (implicit) |
0.6.3_1 05 Jan 2019 20:37:23 |
swills |
net-mgmt/py-ncclient: Fix requirements.txt
PR: 232883
Submitted by: Kai <freebsd_ports@k-worx.org>
Approved by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer) |
0.6.3 06 Oct 2018 18:31:41 |
swills |
net-mgmt/py-ncclient: update to 0.6.3
PR: 231764
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer) |
0.6.2 21 Sep 2018 21:38:55 |
0mp |
net-mgmt/py-ncclient: Update to 0.6.2.
- Add conditional RUN_DEPENDS on devel/py-selectors2.
PR: 230874
Submitted by: John W. O'Brien <john@saltant.com>
Reviewed by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)
Reviewed by: tobik (previous version)
Reviewed by: wen
Approved by: mat (mentor)
Approved by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)
Differential Revision: https://reviews.freebsd.org/D17231 |
0.5.3 10 Jul 2018 12:37:48 |
joneum |
Maintainership back to Submitter
PR: 229673
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru>
Approved by: joneum, Kai (freebsd_ports@k-worx.org> |
0.5.3 09 Jul 2018 18:40:18 |
miwi |
- Pass maintainership to submitter
PR: 229529 229530 229531
Submitted by: freebsd_ports@k-worx.org
Sponsored by: iXsystems Inc. |
0.5.3 05 Jul 2018 00:27:46 |
zi |
- Reset MAINTAINERship due to multiple fatal email bounced |
0.5.3 20 Jun 2018 17:05:44 |
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
0.5.3 05 Apr 2018 03:44:55 |
yuri |
New port: net-mgmt/py-ncclient: Python library for NETCONF clients
PR: 224342
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru> |