Port details |
- exabgp4 BGP engine and route injector
- 4.2.21 net
=2 4.2.21Version of this port present on the latest quarterly branch. - Maintainer: zi@FreeBSD.org
 - Port Added: 2020-01-31 17:24:52
- Last Update: 2022-09-26 21:26:27
- Commit Hash: 3ba8b608
- People watching this port, also watch:: smartmontools, haproxy-devel
- License: BSD3CLAUSE
- Description:
- A BGP route injector which can inject routes with arbitrary next-hops into
your network (source some ipv4/ipv6 routes using both IPv4 and IPv6 TCP
connections), mitigate DDOS using flowspec, or pass the route it receives
in textual form to third party application.
¦ ¦ ¦ ¦ 
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}exabgp4>0:net/exabgp4@${PY_FLAVOR}
- Conflicts:
- CONFLICTS_INSTALL:
- Conflicts Matches:
-
There are no Conflicts Matches for this port. This is usually an error.
- To install the port:
- cd /usr/ports/net/exabgp4/ && make install clean
- To add the package, run one of these commands:
- pkg install net/exabgp4
- pkg install py39-exabgp4
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-exabgp4 listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-exabgp4
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1663076170
SHA256 (Exa-Networks-exabgp-4.2.21_GH0.tar.gz) = 5d5ce6e973fc966fa6aed4a1033b63722d95c8f8ba7bb44659694d659c3f7b7b
SIZE (Exa-Networks-exabgp-4.2.21_GH0.tar.gz) = 2933721
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for py39-exabgp4-4.2.21:
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
- Options name:
- net_exabgp4
- USES:
- python:3.6+ shebangfix
- pkg-message:
- For install:
- ===========================================================================
Sample configurations are located in /usr/local/share/examples/exabgp.
Please create /usr/local/etc/exabgp/exabgp.conf based on one of the above
examples and add exabgp_enable="YES" to /etc/rc.conf
For information on using MD5 signatures, please visit the examples page at:
https://code.google.com/p/exabgp/wiki/examples
===========================================================================
- WWW: https://github.com/Exa-Networks/exabgp
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
4.2.21 26 Sep 2022 21:26:27
    |
Dan Langille (dvl)  |
net/exabgp4: Update to 4.2.21
Approved by: maintainer (via private email) |
07 Sep 2022 21:58:51
    |
Stefan Eßer (se)  |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
4.2.13_2 07 Sep 2022 21:10:59
    |
Stefan Eßer (se)  |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
4.2.13_2 20 Jul 2022 14:22:37
    |
Tobias C. Berner (tcberner)  |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
4.2.13_2 23 Nov 2021 22:11:40
    |
Stefan Eßer (se)  |
*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Approved by: portmgr (blanket) |
4.2.13_2 11 Nov 2021 12:54:05
    |
Ryan Steinmetz (zi)  |
net/exabgp4: Bring back socket loop fix, bump PORTREVISION |
4.2.13_1 16 Aug 2021 19:04:27
    |
Dan Langille (dvl)  |
net/exabgp4: Update to 4.2.13
Allow Python 3.6+
re: https://github.com/Exa-Networks/exabgp/releases/tag/4.2.13
Approved by: zi (maintainer) via private communication |
4.2.11_1 02 Jun 2021 13:34:38
    |
Ryan Steinmetz (zi)  |
net/exabgp4: Bring in upstream patch to fixed stuck CLOSED sockets
- Bump PORTREVISION |
4.2.11 06 May 2021 10:21:42
    |
Ryan Steinmetz (zi)  |
net/exabgp4: Require python 3.6-3.7 |
4.2.11 06 Apr 2021 14:31:13
    |
Mathieu Arnold (mat)  |
all: Remove all other $FreeBSD keywords. |
4.2.11 06 Apr 2021 14:31:07
    |
Mathieu Arnold (mat)  |
Remove # $FreeBSD$ from Makefiles. |
4.2.11 10 Jan 2021 16:04:33
  |
rene  |
Remove empty PY_IPADDRESS from ports using Python 3.6+
Also remove one manual declaration (net-mgmt/py-aggregate6) |
4.2.11 28 Dec 2020 23:02:15
  |
antoine  |
Drop python 2.7 support from a few ports
With hat: portmgr |
4.2.11 25 Aug 2020 19:34:58
  |
zi  |
- Update to 4.2.11 |
4.2.7 31 Jul 2020 20:17:08
  |
zi  |
- Update to 4.2.7 |
4.2.4 02 Feb 2020 20:15:59
  |
zi  |
- LICENSE is misspelled upstream, update to match |
4.2.4 01 Feb 2020 20:36:08
  |
zi  |
- Fix LICENSE_FILE path |
4.2.4 31 Jan 2020 17:24:43
  |
zi  |
- Add new/exabgp4, version 4.x of net/exabgp |