*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

net: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Jette <jettea46@yahoo.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>

Remove # $FreeBSD$ from Makefiles.

Unbreak the build against contemporary OpenSSL versions by converting
to the new BIO_*() API.

net: Add missing USES={gnome,php}

Mark BROKEN on FreeBSD 12 and 13

Reported by:	pkg-fallout
MFH:		2019Q2

devel/glib20: remove runtime dep on perl5

Since glib-mkenums was rewritten in python in glib 2.53.5, glib20 seems
to no longer need perl5 at runtime. This makes perl5 a build dep only.

Removing the run dep causes some other ports to fail, so add the build
dep to those where needed.

PR:		233138
Approved by:	gnome (kwm, maintainer, older version of patch)
Exp-run by:	antoine

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

- Add LICENSE
- Switch to options helpers
- Regenerate patches

net/gsk: add SSL flags

Cleanup plist

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category N.

CR:		D307
Approved by:	portmgr (bapt)

- Switch to USES=libtool, drop .la file
- Strip library
- Optionize docs installation

Add NO_STAGE all over the place in preparation for the staging support (cat:
net)

Finish converting the whole ports tree to USES=pkgconfig

Convert a few remaining straglers from the unmaintined ports to pathfix

Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- Get Rid MD5 support

Sync to new bsd.autotools.mk

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Update to version 1.0.63

PR:             134291
Submitted by:   Ports Fury

- Reset farrokhi@freebsd.org due to long period of inactivity.

Approved by:    portmgr (linimon)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 1.0.57

Approved by:    maintainer implicit

- Update to 1.0.53

Approved by:    maintainer implicit

- UPdate to 1.0.51

Approved by:    maintainer implicit

- Update to 1.0.50

Approved by:    maintainer implicit

- Update to  1.0.49

Approved by:    maintainer (implicit)

- Update to 1.0.48

Submitted by:   farrokhi@

- Update to 1.0.45

PR:             ports/105430
Submitted by:   farrokhi@

Change my email address to farrokhi@ in all ports that I maintain.
Approved by:    miwi (mentor)

- Update to 1.0.45

PR:             ports/104802
Submitted by:   Babak Farrokhi <babak@farrokhi.net> (maintainer)

- update to 1.0.40
- s/INSTALLS_SHLIB/USE_LDCONFIG/

PR:             ports/103030
Submitted by:   Babak Farrokhi (maintainer)

- update to 1.0.38

PR:              ports/100199
Submitted by:   maintianer

Remove USE_REINPLACE from all categories starting with N

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Update to 1.0.17
- Respect NOPORTDOCS (self)
- Pass maintainership to submitter

PR:             91709
Submitted by:   Babak Farrokhi <babak@farrokhi.net>

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 1.0.13

PR:             ports/81056
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Now builds on 4.x

BROKEN: Does not build

Approved by:    portmgr (self)

Bump PORTREVISION to chase the glib20 shared lib version change.

Update to version 1.0.4

PR:             ports/76901
Submitted by:   Ports Fury

Fix build on 5.x: struct sockaddr_in6 has no member sinaddr

Update to version 1.0.0

PR:             ports/70410
Submitted by:   Ports Fury

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

SIZEify.

Remove USE_GNOMENG.

De-pkg-comment.

Port need perl to build (see
http://bento.freebsd.org/errorlogs/5-latest/gsk-0.3.5.log)

Update to 0.3.5

PR:             42246
Submitted by:   tkato@prontomail.com

Convert USE_GLIB into USE_GNOMENG+USE_GNOME.

add missing files in PLIST    

upgrade to 0.3.1   drop maintainership    

add gsk   GSK is a C library for writing servers. It is designed for writing
servers   where everything happens in a single thread.