| Port details |
- intel-ice-kmod Intel® Network Adapter Driver for E810 Series Devices
- 1.38.16_1 net
 =0      1.38.16Version of this port present on the latest quarterly branch. - Maintainer: freebsd@intel.com
- Port Added: 2023-06-12 15:15:37
- Last Update: 2023-08-16 14:49:23
- Commit Hash: 236ef6a
- Also Listed In: kld
- License: BSD2CLAUSE
- WWW:
- https://downloadcenter.intel.com
- Description:
- This release includes the ice FreeBSD Base Driver for Intel(R) Ethernet Network
Connections.
The ice driver supports devices based on the following controllers:
* Intel(R) Ethernet Controller E810-C
* Intel(R) Ethernet Controller E810-XXV
* Intel(R) Ethernet Connection E822-C
* Intel(R) Ethernet Connection E822-L
* Intel(R) Ethernet Connection E823-C
* Intel(R) Ethernet Connection E823-L
  ¦  ¦  ¦  ¦ 
- Manual pages:
-
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- intel-ice-kmod>0:net/intel-ice-kmod
- To install the port:
- cd /usr/ports/net/intel-ice-kmod/ && make install clean
- To add the package, run one of these commands:
- pkg install net/intel-ice-kmod
- pkg install intel-ice-kmod
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: intel-ice-kmod
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1692197198
SHA256 (ice-1.38.16.tar.gz) = 97482b04ab5578a6fdcaa0f4dc2e32dce62f039a8b7d55a5bc8655be4b21df5b
SIZE (ice-1.38.16.tar.gz) = 585605
Packages (timestamps in pop-ups are UTC):
- Master port: net/intel-ixl-kmod
- This port has no dependencies.
- This port is required by:
- for Build
-
- net/intel-irdma-kmod
- for Run
-
- net/intel-irdma-kmod
Configuration Options:- ===> The following configuration options are available for intel-ice-kmod-1.38.16_1:
SRIOV=off: Enable SR-IOV support (experimental)
====> Options available for the single NETMAP: you have to select exactly one of them
NETMAP_ON=off: Enable netmap(4) support unconditionally
NETMAP_OFF=on: Disable netmap(4) support unconditionally
===> Use 'make config' to modify these settings
- Options name:
- net_intel-ice-kmod
- USES:
- kmod
- pkg-message:
- For install:
- THIS PACKAGE INSTALLS THE NEWER VERSION OF THE SOFTWARE WHICH CAN CAUSE SYSTEM
INSTABILITY WHILE USED. USE THE UPDATED VERSION ONLY IF YOU EXPERIENCE
PROBLEMS WITH THE DRIVER PRESENT IN THE KERNEL DISTRIBUTION
Usage:
To load the updated version of the driver add this:
if_ice_updated_load="YES"
to your /boot/loader.conf and reboot the machine.
There's no need to recompile the GENERIC kernel without if_ice driver
After the reboot you may see this kind of messaged in the dmesg:
module_register: module pci/ice already exists!
Module pci/ice failed to register: 17
This is the side effect of the newer version of the driver overriding the
older one and can be safely disregarded
- Master Sites:
|
Number of commits found: 3
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| This is a slave port. You may also want to view the commits to the master port: net/intel-ixl-kmod | | Commit | Credits | Log message |
|---|
1.38.16
16 Aug 2023 14:49:23
 |
Piotr Kubaj (pkubaj) |
net/intel-ice-kmod: update to 1.38.16 |
1.37.11
12 Jun 2023 15:25:47
|
Piotr Kubaj (pkubaj) |
net/intel-ice-kmod: fix pkg-desc
Reported by: Vladimir Druzenko <vvd@freebsd.org> |
1.37.11
12 Jun 2023 15:14:21
|
Piotr Kubaj (pkubaj) |
net/intel-ice-kmod: add a port for Intel 100G driver |
Number of commits found: 3
|
As an Amazon Associate I earn from qualifying purchases.