non port: net/nepenthes/Makefile |
SVNWeb
|
Number of commits found: 53 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
Fri, 4 Jun 2021
|
[ 05:53 Gerald Pfeifer (gerald) ] d09ed09 (Only the first 10 of 52 ports in this commit are shown above. )
*/*: Replace USE_GCC=any with USE_GCC=yes
USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).
Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.
This should not make any functional difference at all.
Discussed with: mat, linimon, pkubaj
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
Sat, 25 May 2019
|
[ 17:20 tobik ]
net/nepenthes: Drop nop and misspelled DOS2UNIX_FILE
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
Sat, 11 Feb 2017
|
[ 20:16 jbeich ]
net/nepenthes: unbreak with gcc6 or later
In file included from SMBDialogue.cpp:34:0:
asn1-shellcodes.h:25:1: error: narrowing conversion of '133' from 'int' to
'char' inside { } [-Wnarrowing]
};
^
asn1-shellcodes.h:25:1: error: narrowing conversion of '255' from 'int' to
'char' inside { } [-Wnarrowing]
asn1-shellcodes.h:25:1: error: narrowing conversion of '200' from 'int' to
'char' inside { } [-Wnarrowing]
asn1-shellcodes.h:300:1: error: narrowing conversion of '191' from 'int' to
'char' inside { } [-Wnarrowing]
};
^
[...]
|
Sun, 20 Nov 2016
|
[ 09:38 gerald ] (Only the first 10 of 364 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
|
Thu, 4 Aug 2016
|
[ 16:05 marino ]
net/nepenthes: Fix LIB_DEPENDS broken by r361812 (July 2014)
That commit removed library version numbers from LIB_DEPENDS, but it
should not have been removed from libmagic. Restore the dependency
on sysutils/file by specifying so version once again.
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Thu, 8 Oct 2015
|
[ 15:12 olgeni ] (Only the first 10 of 83 ports in this commit are shown above. )
Remove trailing whitespace from Makefiles, M-X.
|
Sat, 30 Aug 2014
|
[ 20:50 marino ] (Only the first 10 of 99 ports in this commit are shown above. )
Stage net/nepenthese and unbreak on FreeBSD 10+
PR: 193042
Submitted by: Ports Fury
|
Thu, 21 Aug 2014
|
[ 14:58 koobs ]
security/libprelude: Take MAINTAINER'ship, STAGE & Modernize
- Take Maintainership
- Enable STAGE support
- Tweak MASTER_SITES https -> http (portlint)
- Add LICENSE and LICENSE_FILE
- Deprecate USE_AUTOTOOLS for libtool (-> USES)
- Sort USES and OPTIONS
- Use OPTIONS helpers as much as possible for now [1]
- Add --enable-static to CONFIGURE_ARGS to retain the static lib
- Assign and Use ETCDIR rather than hardcoding
- Use the install-strip install target
- Update pkg-plist, use @sample and other goodies
While I'm here, bump dependent ports since our SHLIB major version has
changed
[1] https://reviews.freebsd.org/D665
Approved by: portmgr (implicit, bump unstaged port)
|
Thu, 24 Jul 2014
|
[ 15:57 bapt ] (Only the first 10 of 74 ports in this commit are shown above. )
Reset maintainership for ports not staged with no pending PR
With hat: portmgr
|
Mon, 14 Jul 2014
|
[ 18:42 bapt ] (Only the first 10 of 280 ports in this commit are shown above. )
Modernize LIB_DEPENDS
With hat: portmgr
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
Fri, 6 Sep 2013
|
[ 10:47 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Thu, 11 Jul 2013
|
[ 16:26 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
- Add COOKIES
- Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
- Add GSSAPI and SPNEGO [2]
- Remove KERBEROS4
- Rename LIBIDN to IDN
- Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile
Changes: http://curl.haxx.se/changes.html
PR: ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by: Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by: miwi
|
Sat, 15 Dec 2012
|
[ 23:52 pawel ]
Bump ports affected by security/libprelude update
|
Mon, 10 Dec 2012
|
[ 19:11 mm ] (Only the first 10 of 233 ports in this commit are shown above. )
Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports
|
Thu, 8 Mar 2012
|
[ 08:04 sunpoet ] (Only the first 10 of 21 ports in this commit are shown above. )
- Fix build with curl 7.24.0: curl/types.h was removed (unused since Apr 2004)
Submitted by: sunpoet (myself)
Tested by: exp-run by linimon
Approved by: linimon (with portmgr hat)
|
Tue, 14 Feb 2012
|
[ 12:45 mm ] (Only the first 10 of 140 ports in this commit are shown above. )
Bump pcre library dependency due to 8.30 update
|
Sat, 3 Apr 2010
|
[ 10:44 roam ] (Only the first 10 of 202 ports in this commit are shown above. )
Chase the ftp/curl shlib version bump.
|
Sat, 19 Sep 2009
|
[ 21:12 pav ]
- Chase libprelude update
Feature safe: yes
|
Sat, 22 Aug 2009
|
[ 00:32 amdmi3 ] (Only the first 10 of 341 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with N
|
Wed, 18 Feb 2009
|
[ 23:39 amdmi3 ]
- Chase security/libprelude shlib version bump
PR: 131286, 131585 (partial)
Submitted by: Vladimir Korkodinov <viper at perm dot raid dot ru>
|
Fri, 23 Jan 2009
|
[ 15:43 roam ] (Only the first 10 of 182 ports in this commit are shown above. )
Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.
|
Thu, 25 Dec 2008
|
[ 20:02 miwi ]
- Update to 0.2.2
PR: 129925
Submitted by: Michael Josic <systemoperator@gmail.com> (maintainer)
|
Mon, 29 Sep 2008
|
[ 23:47 beech ]
- Chase libprelude shlib bump
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
Wed, 14 May 2008
|
[ 22:12 miwi ]
- Chase security/libprelude shlib version bump
PR: 123661
Submitted by: Robin Gruyters
Pointy hat to: miwi
|
Fri, 5 Oct 2007
|
[ 01:49 clsung ]
- update prelude dependency
PR: ports/116113
Submitted by: Robin Gruyters <r dot gruyters_AT_yirdis dot nl>
Approved by: maintainer (Michael Josic)
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
Wed, 4 Jul 2007
|
[ 17:26 miwi ]
- Fix build with gcc 4.2
Submitted by: danfe@ (thanks)
Approved by: maintainer via privat mail
|
[ 11:39 miwi ]
- Marked Broken does not compile with gcc 4.2
PR: 114225
Submitted by: Michael Josic <systemoperator@gmail.com> (maintainer)
|
Tue, 12 Jun 2007
|
[ 16:38 araujo ]
- Updated dependency library libprelude.
- Bump PORTVERSION to force rebuild.
Submitted by: Marcelo Araujo <araujo@FreeBSD.org>
Approved by: stas (mentor)
|
Sat, 3 Mar 2007
|
[ 18:32 kris ]
Now appears to build on amd64, assuming it might on other arches too.
Remove support for 4.x.
|
Tue, 16 Jan 2007
|
[ 18:43 rafan ]
- Chase libprelude update
PR: ports/107989
Submitted by: Robin Gruyters <r.gruyters at yirdis.nl>
Approved by: Michael Josic <systemoperator at gmail.com> (maintainer)
|
Mon, 15 Jan 2007
|
[ 14:55 miwi ]
- Update to 2.0
PR: ports/107916
Submitted by: Michael Josic<systemoperator@gmail.com> (maintainer)
|
Wed, 13 Dec 2006
|
[ 12:41 roam ] (Only the first 10 of 107 ports in this commit are shown above. )
Update the ftp/curl port to 7.16.0.
Bump PORTREVISION of all dependent ports.
Fix the build errors in the few ports that still use the long deprecated,
and now obsoleted, cURL options.
Thanks to everyone who took the time to look over the patch!
Discussed on: -ports
|
Mon, 27 Nov 2006
|
[ 01:19 clsung ]
- Added WITH_PRELUDE option. Also added a patch to fix the 'missing prelude.h'
message.
PR: ports/104618
Submitted by: Robin Gruyters <r dot gruyters_AT_yirdis dot nl>
Approved by: maintainer (Michael Josic)
|
Fri, 4 Aug 2006
|
[ 14:04 rafan ]
- Add two critical patches for MyDoom and Bagle modules
- Pass maintainership to submitter
PR: ports/101321
Submitted by: Michael Josic <systemoperator at gmail.com> (new maintainer)
Approved by: Ryo Okamoto <ryo at aquahill.net> (old maintainer)
|
Fri, 12 May 2006
|
[ 15:31 garga ]
- Update to 0.1.7
PR: ports/96674
Submitted by: maintainer
|
Sat, 29 Apr 2006
|
[ 23:56 mnag ]
- Update port 0.1.6
- Mark as BROKEN on 4.x
PR: 96168
Submitted by: maintainer
|
Mon, 24 Apr 2006
|
[ 02:43 marcus ]
Fix the adns library version so it matches the internal soname. This sets
the lib version back to 1, but since the dependencies still linked to
libadns.so.1 even when the installed file was libadns.so.12, a new
PORTREVISION bump is not needed.
|
Fri, 21 Apr 2006
|
[ 18:39 sem ]
- Bump adns library version and PORTREVISION after last dns/adns update
for all affected ports.
Reproached by: kris
|
Sat, 28 Jan 2006
|
[ 21:11 kris ]
BROKEN on !i386: Does not compile
|
Mon, 2 Jan 2006
|
[ 21:25 edwin ]
New port: net/nepenthes (resend with shar)
Nepenthes can determine the malware activity on a network
by deploying a nepenthes sensor (i.e. honey pot). The
programm emulates different well known vulnerabilities
waiting for malicious connections trying to exploit them.
WWW: http://nepenthes.sourceforge.net
PR: ports/90062
Submitted by: ryo <ryo@aquahill.net>
|
Number of commits found: 53 |