| Port details |
- py-radix Python radix-tree implementation
- 0.10.0 net
 =3      0.10.0Version of this port present on the latest quarterly branch. - Maintainer: lerik@nolink.net
- Port Added: 2005-08-29 13:53:50
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: nagios-check_hdd_health, nuitka-py311, monit, py39-beautifulsoup, openmdns
- Also Listed In: python
- License: ISCL BSD4CLAUSE
- WWW:
- https://github.com/mjschultz/py-radix
- Description:
- py-radix is an implementation of a radix tree data structure
for the storage and retrieval of IPv4 and IPv6 network prefixes.
The radix tree is the data structure most commonly used for
routing table lookups. It efficiently stores network prefixes of
varying lengths and allows fast lookups of containing networks.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}radix>0:net/py-radix@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/net/py-radix/ && make install clean
- To add the package, run one of these commands:
- pkg install net/py-radix
- pkg install py39-radix
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-radix listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-radix
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1517507838
SHA256 (py-radix-0.10.0.tar.gz) = b8dbd1344bb30c6a1097d4103203c7b117d92931620365985018de4bef5aede3
SIZE (py-radix-0.10.0.tar.gz) = 21815
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Build
-
- net-mgmt/py-aggregate6
- for Run
-
- net-mgmt/py-aggregate6
Configuration Options:- No options to configure
- Options name:
- net_py-radix
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.10.0
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.10.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.10.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.10.0
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
0.10.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.10.0
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.10.0
24 Dec 2020 13:46:02
|
kai |
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python) |
0.10.0
16 Feb 2018 01:42:02
|
swills |
net/py-radix: Upgrade to 0.10.0
PR: 225610
Submitted by: John W. O'Brien <john@saltant.com>
Approved by: maintainer timeout (lerik@nolink.net, > 2 weeks) |
0.9.6
28 Jun 2016 23:56:49
|
wen |
- Update to 0.9.6
- Add LICENSE
- Update WWW
PR: 209524
Submitted by: john@saltant.com
Approved by: maintainer(timeout, >40 days) |
0.5_1
19 May 2016 10:44:12
|
amdmi3 |
- Fix trailing whitespace in pkg-descrs, categories [g-n]*
Approved by: portmgr blanket |
0.5_1
24 Oct 2014 16:21:26
|
mva |
- Convert ports of net/ to new USES=python
Approved by: portmgr (implicit) |
0.5_1
10 Jul 2014 12:13:12
|
olgeni |
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category N.
CR: D307
Approved by: portmgr (bapt) |
0.5_1
31 Jan 2014 09:22:40
|
miwi |
- Convert to PYDISTUTILS_AUTOPLIST
- Stage support
- Bump PORTREV |
0.5
20 Sep 2013 22:10:25
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
net) |
0.5
20 Mar 2011 12:54:45
|
miwi |
- Get Rid MD5 support |
0.5
22 Feb 2008 08:52:49
|
lwhsu |
- Update to 0.5
PR: ports/119297
Submitted by: Oleg Ukraincev <oleg AT ht-systems.ru>
Approved by: maintainer timeout |
0.4
22 Jan 2006 21:24:05
|
edwin |
SHA256ify
Approved by: krion@ |
0.4
29 Aug 2005 13:53:14
|
vsevolod |
Add py-radix - a python radix tree implementation.
PR: 84779
Submitted by: Lars Erik Gullerud <lerik@nolink.net>
Approved by: perky (mentor) |
As an Amazon Associate I earn from qualifying purchases.