Quagga is a routing software suite, providing implementations of
OSPFv2, OSPFv3, RIP v1 and v2, RIPv3, BGPv4 and experemental ISIS
for Unix platforms, particularly FreeBSD and Linux and also NetBSD,
to mention a few. Quagga is a fork of GNU Zebra which was developed
by KunihiroIshiguro. The Quagga tree aims to build a more involved
community around Quagga than the current centralised model of GNU Zebra.
WWW: http://www.quagga.net/
===> The following configuration options are available for quagga-esr-0.99.24.1:
DLMALLOC=off: Use dlmalloc (makes bgpd much faster)
ISISD=on: Enable ISIS daemon (beta)
ISIS_TOPOLOGY=off: Enable IS-IS topology generator
NO_BGP_ANNOUNCE=off: Turn off BGP route announcement
OSPF_NEXTHOP=off: Set ip next-hop in OSPF route maps
PAM=off: PAM authentication for vtysh
PIMD=on: PIM-SSM multicast routing
RTADV=on: IPv6 Router Advertisements
SNMP=off: SNMP network protocol support
TCPSOCKETS=off: Use TCP/IP sockets for protocol daemons
===> Use 'make config' to modify these settings
==========================================================
To enable quagga, add the following lines to rc.conf:
defaultrouter="NO"
quagga_enable="YES"
Also, you may wish to set the following options:"
quagga_daemons="zebra bgpd etc..."
quagga_flags="...."
quagga_extralibs_path="... ..."
router_enable="NO"
watchquagga_enable="YES"
==========================================================
New port: net/quagga-esr
-esr means extended support for now (as newer quagga versions have
some issues).
Quagga is a routing software suite, providing implementations of
OSPFv2, OSPFv3, RIP v1 and v2, RIPv3, BGPv4 and experemental ISIS
for Unix platforms, particularly FreeBSD and Linux and also NetBSD,
to mention a few. Quagga is a fork of GNU Zebra which was developed
by KunihiroIshiguro. The Quagga tree aims to build a more involved
community around Quagga than the current centralised model of GNU Zebra.
WWW: http://www.quagga.net/
