| Port details |
- rtpproxy High-performance RTP proxy server for the SIP Express Router (SER)
- 2.1.1 net
 =2      Version of this port present on the latest quarterly branch. - Maintainer: farrokhi@FreeBSD.org
- Port Added: 2008-06-17 05:53:05
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: asterisk16, rtty, tmpreaper, sysinfo
- License: BSD2CLAUSE
- Description:
- The Sippy RTPproxy is a high-performance software proxy for RTP streams that
can work together with SIP Express Router (SER), OpenSER or Sippy B2BUA or
any other SIP proxy or SIP B2BUA capable of rewriting SDP bodies in SIP
messages that it relays.
The main purpose of RTPproxy is to make the communication between SIP user
agents behind NAT(s) (Network Address Translator) possible. Several cases
exists when direct end-to-end communication is not possible and RTP streams
have to be relayed through another host. The RTPproxy can be used to setup
such a relaying host.
Originally created for handling NAT scenarious it can also act as a generic
media relay as well as gateway RTP sessions between IPv4 and IPv6 networks.
It can also perform number of additional functions, including call recording,
playing pre-encoded announcements, real-time stream copying and RTP payload
reframing.
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/net/rtpproxy/ && make install clean
- To add the package, run one of these commands:
- pkg install net/rtpproxy
- pkg install rtpproxy
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: rtpproxy
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1602330417
SHA256 (sippy-rtpproxy-v2.1.1_GH0.tar.gz) = 6404774fca10f5fdac08a2aae080e984e20628199564944608513e79089b4695
SIZE (sippy-rtpproxy-v2.1.1_GH0.tar.gz) = 1796618
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Library dependencies:
-
- libgsm.so : audio/gsm
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- net_rtpproxy
- USES:
- cpe libtool
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
07 Sep 2022 21:58:51
 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.1.1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.1.1
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
2.1.1
31 Aug 2021 11:34:59
|
Bernhard Froehlich (decke) |
net/rtpproxy: Add CPE information
Approved by: portmgr (blanket) |
2.1.1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.1.1
10 Oct 2020 11:53:56
 |
farrokhi |
net/rtpproxy: Update to 2.1.1 |
2.1.0
15 Jun 2019 16:08:03
|
farrokhi |
net/rtpproxy: Update to 2.1.0 |
2.0.0_1
01 Apr 2016 14:16:20
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight |
2.0.0_1
03 Nov 2015 08:14:02
|
farrokhi |
- Improve rc script
PR: 200751
Approved by: mat
Differential Revision: https://reviews.freebsd.org/D3741 |
2.0.0
29 Aug 2015 13:56:56
|
farrokhi |
net/rtpproxy:
- Update to 2.0.0
- Pet portlint
- Take maintainership
Approved by: mat
Differential Revision: https://reviews.freebsd.org/D3523 |
1.2.1_1
22 May 2015 20:34:29
|
mat |
Remove $FreeBSD$ from patches files everywhere.
With hat: portmgr
Sponsored by: Absolight |
1.2.1_1
18 Aug 2014 11:52:27
|
wg |
net/rtpproxy: support stage
PR: 192612
Submitted by: Nikola Kolev |
1.2.1_1
24 Jul 2014 15:57:24
|
bapt |
Reset maintainership for ports not staged with no pending PR
With hat: portmgr |
1.2.1_1
14 Jul 2014 18:42:04
|
bapt |
Modernize LIB_DEPENDS
With hat: portmgr |
1.2.1_1
11 Jun 2014 14:50:00
|
tijl |
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be(Only the first 15 lines of the commit message are shown above ) |
1.2.1_1
20 Sep 2013 22:10:25
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
net) |
1.2.1_1
22 Dec 2012 17:29:18
|
crees |
Use USERS and GROUPS
Approved by: sobomax (maintainer) |
1.2.1_1
12 Dec 2012 02:08:34
|
sobomax |
Add unprivileged user to run under, so it's more secure.
Reminded by: Olle E. Johansson |
1.2.1
23 Sep 2011 22:26:39
|
amdmi3 |
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav |
1.2.1
20 Mar 2011 12:54:45
|
miwi |
- Get Rid MD5 support |
1.2.1
20 Nov 2009 20:27:59
|
sobomax |
Update to 1.2.1.
Submitted by: Sylvio Cesar
PR: 139936 |
1.2.0
24 Mar 2009 05:04:37
|
sobomax |
Update to 1.2.0. |
1.1
17 Jun 2008 05:52:53
|
sobomax |
Add rtpproxy - a high-performance RTP proxy server for the SIP
Express Router (SER) or OpenSER. |
As an Amazon Associate I earn from qualifying purchases.