===> The following configuration options are available for ss5-3.8.9.8_4:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
all: drop support for expired FreeBSD 14.0
Simplify expressions for FreeBSD 13.X
Reviewed by: many
Differential Revision: https://reviews.freebsd.org/D46601
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888
*/*: Fix build with llvm16 on 13.2-STABLE
As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.
- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
1302507 and less than 1400000
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
Mk/**ldap.mk: Convert USE_LDAP to USES=ldap
Convert the USE_LDAP=yes to USES=ldap and adds the following features:
- Adds the argument USES=ldap:server to add openldap2{4|5|6}-server as
RUN_DEPENDS
- Adds the argument USES=ldap<version> and replaces WANT_OPENLDAP_VER
- Adds OPENLDAP versions in bsd.default-versions.mk
- Adds USE_OPENLDAP/WANT_OPENLDAP_VER in Mk/bsd.sanity.mk
- Changes consumers to use the features
Reviewed by: delphij
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D38233
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above )
net/openldap24-client: bump all dependent port
In the earlier net/openldap24-server commit, only those which depend on
net/openldap24-sasl-client were bumped. Bumping all dependent port that
didn't get a bump to force a rebuild of these packages.
Suggested by: kib
Simplify error handling logic a bit: there is no immediate need to free
resources after initial BN_bin2bn() calls for `p' and `g'; just utilize
the original code and call BN_free() after initializing `a' if anything
had failed.
- Unbreak the build against modern OpenSSL versions
- Plug a few memory leaks in ss5_secure_dh_compute_key()
- Remove no-op sed(1) call, it does not modify anything
Cleanup DIST* variables.
When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup
With hat: portmgr
Sponsored by: Absolight
net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD
databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip
databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample
(Only the first 15 lines of the commit message are shown above )
net/ss5: Fix on clang, DragonFly, and support stage
I estimated it would take me 15 minutes to incorporate the PR, but boy
was I wrong. After several HOURS I finally got this port staged,
building on FreeBSD 10+, DragonFly too, and fix accomplished the
intent of the PR (don't clobber conf files, less noisy).
Staging revealed the original port was installing undocumented files.
Clang was having issues with the "inline" directives and I could only
get it to build on clang by removing them (this doesn't mean the
functions won't be inlined, nor does the directive mean that it will.)
Anyway -- a gift. I wouldn't have done this had I know how much work
it was going to be. I also should have overwritten the install
target instead of patch the vendor Makefile, that would have been a
lot easier and faster.
PR: ports/176676
Submitted by: Lawrence Chen
Approved by: maintainer (Raffaele DeLorenzo)
Other work by: marino
MFH: 2014Q2
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Update to 3.8.5
PR: ports/155020
Submitted by: Aleksey V. Gnezdilov <aleksey@vtrek.ru>
Approved by: Raffaele De Lorenzo <raffaele.delorenzo@libero.it> (maintainer)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Add ss5 3.6.1, SOCKS v4/v5 application layer gateway with many features
PR: ports/111187
Submitted by: Raffaele De Lorenzo <raffaele.delorenzo at libero.it>
