Yate - Yet Another Telephony Engine
is a next-generation telephony engine; while currently focused on
Voice over Internet Protocol (VoIP) and PSTN, its power lies in its
ability to be easily extended. Voice, video, data and instant
messenging can all be unified under Yate's flexible routing engine,
maximizing communications efficiency and minimizing infrastructure
costs for businesses.
Yate is production-ready software and is easily extensible.
Yate is licensed under the GPL.
===> The following configuration options are available for yate-6.4.1_1:
AMR=off: AMR 3GPP speech codec support (opencore)
DAHDI=off: Dahdi support
DOCS=on: Build and/or install documentation
H323=off: H323 software channel/protocol support
ILBC=off: iLBC narrowband speech codec support
MYSQL=off: MySQL database support
PGSQL=off: PostgreSQL database support
SCTP=on: Stream Control Transmission Protocol support
SPANDSP=off: SpanDSP faxing support
SQLITE=off: SQLite database support
===> Use 'make config' to modify these settings
devel/autoconf: Update to 2.73
cad/alliance, databases/proxysql, deskutils/growl-for-linux,
emulators/wine-proton, net/yate, sysutils/grub2-efi,
sysutils/grub2-pcbsd: Add USE_CSTD=gnu11 because autoconf 2.73 tries
to use C23 and these ports are broken with that.
PR: 293963
Exp-run by: antoine
net/yate: fix build on aarch64
Add a bunch of architecture-specific defines to make the build succeed.
Approved by: portmgr (build fix blanket)
MFH: 2025Q1
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
For ports that are explicitly enabled on armv6, also enable them
on armv7. This has not been tested with an -exp run but should
"do no harm".
PR: 221894 (partial)
Do not use post-stage. Use post-install instead.
The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.
PR: 214780
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
- Update comms/spandsp to version 0.0.6 [1]
- Convert all comms/spandsp-devel consumers to use newer comms/spandsp
- Bump affected ports
- Mark comms/spandsp-devel as deprecated and set expiration date
- Add upgrade instructions to UPDATING
PR: 194399 [1]
Submitted by: Nikola Kolev <koue@chaosophia.net> [1]
Approved by: madpilot (asterisk ports), maintainer timeout (other)
comms/spandsp-devel:
- Fix installation of lib/libspandsp.so.2 (when patching configure.ac
almost all USE_AUTOTOOLS are needed)
- Replace CONFIGURE_ARGS with CPPFLAGS/LIBS
Reported by: antoine
- Switch comms/spandsp-devel to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
- Use install-strip target instead of STRIP_CMD
- Add/fix libspandsp.so versions in LIB_DEPENDS to differentiate between spandsp
and spandsp-devel
Approved by: portmgr blanket
- Tentatively try to unbreak parallel (-jX) builds by avoiding a race when
two gmakes were descending into `engines' directory at the save time:
===> Building for yate-4.3.0.p1
c++ -Wall -I. -I. -O2 -pipe -fPIC [...] -c main.cpp
gmake -C ./engine all
gmake -C ./engine all
gmake[1]: Entering directory `[...]/yate-4.3.0-1/engine'
As a result of this, produced `libyate.so.4.3.0' can be bogus, and will
fail to link against:
c++ -Wall -L/usr/local/lib -o yate -lpthread main.o libyate.so
libyate.so: undefined reference to
`TelEngine::DefaultLogic::DefaultLogic(char const*, int)'
(Only the first 15 lines of the commit message are shown above )
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
Fix problem introduced in r302141. The directory for the unpacked source
files is unversioned, so it conflicts with the name of the rc.d script in
WRKDIR after SUB_FILES is applied.
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- add a current version of yate (3.3.2p1). This is not a repocopy of
net/yate-devel as net/yate already existed in the repository.
- register in UIDs/GIDs (uses same UID/GID as yate-devel)
PR: ports/156248
Submitted by: Valeriy Komaorv <komarov@valerka.net>
