print/foomatic-db-engine: Moved man to share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

Remove # $FreeBSD$ from Makefiles.

print, science: Add missing USES=gnome

print/foomatic-db-engine: Update version 4.0.12=>4.0.13

- Pet portlint

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

print/foomatic-db-engine is not jobs safe

This port has failed on me with multijob several times.
The last time, the lib/perl5/site_perl/Foomatic/Defaults.pm file
was not installed, so set MAKE_JOBS_UNSAFE.

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

Add a patch, that removes the reference to bash from
one of the installed scripts.

(This was caught by the "QA step" here.)

print/foomatic-db-engine: Update version 4.0.11=>4.0.12

- Add LICENSE GPLv2
- Remove MAKE_JOBS_UNSAFE as it builds fine without it
- Take maintainrship

Approved by:	bapt marino (implicit)

Cleanup plist

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

print/foomatic-db-engine: Not jobs safe

Some times man page isn't ready before installing starts.

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update to version 4.0.11.

Release cups-* nad foomatic-* ports. Currently I have no enough
spare time for those ports.

I've submitted ports/186824 to update cups-* ports to version 1.7.0.

. take maintainership print/foomatic-db, print/foomatic-db-engine,
print/foomatic-filters);
. update to version 20131207;
. change MASTER_SITES;
. use new LIB_DEPENDS syntax;
. incorporate USES=gmake;
. allow staging.

PR:		ports/184690
Submitted by:	bsam (me)
Reviewed by:	acm (former maintainer, maintainer timeout)

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

- Update to 4.0.7

- Update to 4.0.1
- Bump PORTEPOCH

- Update to 20070124

- Update to 20061214
- Add miwi's mirror to MASTER_SITES (miwi thanks)

- Update to 20061031

- Update to 20060922

- Update to 20060822

Approved by:    garga (mentor)

- Update to 20060723
- Change master site local to my account

Approved by:    garga (mentor)

Change maintainer address to my @FreeBSD.org email

Approved by:    garga (mentor)

- Update to 20060618

PR:             ports/99129
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)

- Update to 20060531
- Host tarball locally
- Take maintainership

PR:             ports/98203
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

Update to version 3.0.2

PR:             ports/72325
Submitted by:   Ports Fury

BROKEN: Configure fails

Approved by:    portmgr (self)

Move devel/autoconf->devel/autoconf253 and devel/automake->devel/automake15
All autotools ports are now truly versioned and do not conflict with each
other.

This marks the end of "Phase 1" of the autotools updates.

Add another XML patch to fix the build.

Reported by:    pointyhat via kris

Do not attempt to load the old libxml1 stuff since that was removed from
libxml2-2.6.11.  We depend on libxml2 anyway, so this should effectively
be a NOP while ensuring this port still builds.

Reported by:    pointyhat via kris

Sync with new bsd.autotools.mk

Update ftp/curl to 7.12.0 and bump the shared library version in all
dependent ports.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Fix make patch after gettext PORTREVISION bump by using DISTNAME instead of
PKGNAME for the tarball and WRKSRC.

PR:             63148
Submitted by:   Taoka Fumiyoshi <fmysh@iijmio-mail.jp>

BROKEN: Fails to patch

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Fix build, fix plist, bump version

Reported by:    bento via kris

- Update to today (20031120) CVS and fix building

PR:             ports/58423
Submitted by:   Martin Ranne <gasp@ridcully.dnsalias.org>
Approved by:    adamw (mentor)

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Reset bouncing maintainer address

Mark BROKEN (see bento logs).  These ports are scheduled for removal
after Feb 2 2004 if they are still broken at that time and no fixes
have been submitted by PR.

BROKEN: Does not compile

Add USE_AUTOMAKE to the ports Makefile

Noticed by: bento

New port: print/foomatic-db-engine

        db engine for foomatic (and gimp-print) printer drivers

PR:             ports/48812
Submitted by:   Martin Ranne <gasp@ridcully.dnsalias.org>