21:56 Rene Ladan (rene) 

cleanup: Remove expired GhostScript 8 ports:

2023-06-30 print/ghostscript8-base: Obsolete and unsupported upstream, consider
using a more recent version
2023-06-30 print/ghostscript8-x11: Obsolete and unsupported upstream

    e8db976

16:17 Po-Chuan Hsieh (sunpoet) 

graphics/jasper: Update to 4.0.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/jasper-software/jasper/releases
Security:	CVE-2022-2963, CVE-2022-40755

    b1c370e

19:34 Matthias Andree (mandree) 

print/ghostscript[78]: mark FORBIDDEN

Let's forbid these DEPRECATED ports.

Security:	CVE-2023-28879
Security:	25872b25-da2d-11ed-b715-a1e76793953b

    4a7d4c1

19:04 Daniel Engberg (diizzy) 

print/ghostscript8*: Deprecate and set expiration date to 2023-06-30

8.71 is more than 12 years old by now and have been unsupported
for many years so it's about time to let go of these ports

PR:		269356, 269357
Reported by:	Michael Osipov <michael.osipov@siemens.com>

    0814211

15:43 Stefan Eßer (se) 

Move more WWW entries from pkg-descr files into Makefiles

The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.

Approved by:	portmgr (implicit)

    986beaa

14:22 Tobias C. Berner (tcberner) 

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
  *  Anton Berezin <tobez@tobez.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce M. Simpson <bms@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  D'Arcy Cain <darcy@druid.net>
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitry Kazarov <d.y.kazarov@mail.ru>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Fabiano Sidler <fabianosidler@swissonline.ch>
  *  Fernan Aguero <fernan.aguero@gmail.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Golyashov Sergey <svvord@soft-wizard.ru>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
  *  Jean-Sebastien Roy <js@jeannot.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KATO Tsuguru <tkato@prontomail.com>
  *  Kapil Chowksey
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Klemm <andreas@klemm.gtn.com>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Lars Koeller
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Kammerhofer
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Maxim Loginov <Zeliboba@mail.ru>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Mike Meyer <mwm@mired.org>
  *  Mikhail Teterin
  *  Mita Yoshio <mita@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Dung (patrick_dkt@yahoo.com.hk)
  *  Patrick Powell <papowell@astart.com>
  *  Pedro Giffuni
  *  Philip M. Gollucci <pgpollucci@p6m7g8.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Robert Withrow <witr@rwwa.com>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stephen Fisher
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tim McCormick <tim@pcbsd.org>
  *  Tomokatsu SAITO <saito@a2z.co.jp>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
  *  amistry@am-productions.biz
  *  andrew@scoop.co.nz
  *  arved
  *  brett@peloton.physics.montana.edu
  *  chuckr@FreeBSD.org
  *  cjm2
  *  dbader@eece.unm.edu
  *  dgilbert@velocet.ca
  *  e-masson@kisoft-services.com
  *  eserte@cs.tu-berlin.de
  *  gahr
  *  giffunip
  *  hrs
  *  ijliao
  *  jmz
  *  joerg
  *  johans
  *  jseger@FreeBSD.org
  *  kline
  *  ljo
  *  lofi@FreeBSD.org
  *  martin.dieringer@gmx.de
  *  mwest@uct.ac.za
  *  oly@world.std.com
  *  patrick, trevor
  *  smace@FreeBSD.org
  *  spcoltri@unm.edu
  *  tg@FreeBSD.org
  *  tobez
  *  wenheping@gmail.com

With hat:	portmgr

    51879c9

20:55 Po-Chuan Hsieh (sunpoet) 

graphics/jasper: Bump PORTREVISION of dependent ports for shlib change after
cdcedd316da6d7c8509c394474160c683489a3ae

    735ea04

15:15 Stefan Eßer (se) 

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

    bcaf25a

18:26 Danilo G. Baio (dbaio) 

print/ghostscript*: Return Ghostscript ports to the pool

Approved by:	 doceng (with hat)

    9a0b5c02

22:11 Stefan Eßer (se) 

*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

    5933ac0

15:14 Bernhard Froehlich (decke) 

print/ghostscript8-base: Add CPE information

Approved by:    portmgr (blanket)

    9a900c7

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:43 bapt 

Update jasper to 2.0.16

This is needed to be able to update gegl to latest version.
Bump revision of all consumer as the ABI is not 100% backward compatible.
Provide a patch for graphics/devil to properly build with latest jasper.
While here add a missing USES=xorg to graphics/devil

 

14:47 danfe 

For ports under `print' category: remove redundant PKGMESSAGE assignment,
which is set appropriately by the b.p.m when `pkg-message' appears on the
SUB_FILES list.

 

12:51 mat 

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

20:35 amdmi3 

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

14:58 tijl 

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

01:57 hrs 

Fix a build error which occurred with jbig2dec=>0.12.

 

17:48 hrs 

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

(Only the first 15 lines of the commit message are shown above )