print/latex-biber: Downgrade to 2.19

In some scenarios, v2.20 did not work sufficiently with biblatex v3.19.
As recommended, switch back to v2.19. Therefore, partial revert of the
commit 59b78e28ea9fda5ca133ff448b82146191fbf91f.

Retained from the previous commit:
- Textual corrections to the port
- Pet portlint by rearranging Makefile entries
- Keeping the customizations for test environment

Reported by:	Clemens Heitzinger (via private mail)

MFH:		2024Q4

print/latex-biber: Update to 2.20

Changelog: /poudriere/ports/default/print/latex-biber/Makefile

PR:		280904

Approved by:	tex@ (maintainer timeout > 2 weeks)
Co-authored-by:	Rainer Hurling <rhurlin@FreeBSD.org>

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

*/tex*: Update version 20210325=>20230313

- devel/tex-kpathsea: Update version 6.3.3=>6.3.5
- print/texlive-tlmgr: Update version 20210325=>20230313
  * Add LICENSE GPLv2
- devel/tex-libtexlua: Update distinfo from 20230313 dists
- devel/tex-libtexluajit: Update distinfo from 20230313 dists
- print/tex-ptexenc: Update version 1.3.9=>1.4.3
  * Pet portclippy
- devel/tex-web2c: Update version 20210325=>20230313
- devel/tex-synctex: Update distinfo from 20230313 dists
- print/tex-basic-engines: Update version 20210325=>20230313
- print/texlive-base: Update version 20210325=>20230313
- print/texlive-docs: Update version 20210325=>20230313
- print/texlive-full: Update version 20210325=>20230313

print/latex-biber: rollback to 2.16 to be in sync with biblatex.sty

From [1]:
          Biber versions are closely coupled with Biblatex versions. You
          need to have the right combination of the two. Biber will warn
          you during processing if it encounters information which comes
          from a Biblatex version which is incompatible. Table 1 shows a
          compatibility matrix for the recent versions.

          Biber version | Biblatex version
               2.18     |   3.18
               2.17     |   3.17
               2.16     |   3.16
                      [...]
  [1]
https://sourceforge.net/projects/biblatex-biber/files/biblatex-biber/development/documentation/biber.pdf/d
 ownload

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

print/latex-biber: Add some more missing dependencies

print/latex-biber: add missing dependency

Can't locate Class/Accessor.pm in @INC (you may need to install the
Class::Accessor module) (@INC contains: /usr/local/lib/perl5/site_perl/mach/5.32
/usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.32/mach
/usr/local/lib/perl5/5.32) at /usr/local/lib/perl5/5.32/parent.pm line 16.
BEGIN failed--compilation aborted at /usr/local/lib/perl5/site_perl/Biber.pm
line 5.
Compilation failed in require at /usr/local/bin/biber line 17.
BEGIN failed--compilation aborted at /usr/local/bin/biber line 17.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print/latex-biber: Update version 2.1=>2.17

Approved by:	tex (with hats on)
Relnotes: https://github.com/plk/biber/releases/tag/v2.17

print/latex-biber: Update maintainer from freebsd-tex@ to tex@

PR:		257601
Approved by:	tcberner (mentor)

print/texlive-full: Update maintainership of TeX Live universe ports

- Give the maintainership of the TeX-live related ports to the FreeBSD
  TeX group [1].

[1] https://wiki.freebsd.org/tex

Approved by:	hrs

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

print/latex-biber: Add missing net/p5-URI dependency

PR:		208277
Submitted by:	Tobias Brodel <brittlehaus@gmail.com>
Approved by:	hrs (maintainer timeout, 2 years)

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Bump PORTREVISION for ports affected by the fix the last commit.

Done with:	Tools/scripts/bump-revision.sh
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Don't use GH_TAGNAME when DISTVERSION* variables can be used.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Add missing dependency.

- Add print/latex-biber, a biblatex replacement which supports Unicode.
- Add or update the following ports which latex-biber depends on:

   japanese/p5-Encode-EUCJPASCII (added, eucJP-open encoding support)
   misc/p5-Business-ISMN (added, ISMN support)
   textproc/p5-Text-BibTeX (updated to 0.71)
   textproc/p5-Text-Roman (added, conversion of Roman numerals)