print/latex2rtf: Moved man to share/man

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

print/latex2rtf: Update version 2.3.17=>2.3.18

- Remove USES=makeinfo
- Pet portclippy
- Adopt port

Mk/bsd.sites.mk: Add new MACRO TEX

There are two different sites/mirror required for the ports tree. Due to
the packaging of texlive we need the CTAN historic mirror which is
defined in TEX_CTAN and normal mirror which hosts most of the packages.
Unfortunately both were uses interchangeably without checking the
details and in previous there was single sites mirroring both the
historic dists and the noemal packages. As this is no longer the case
update all other ports pointing towards the wrong site.

Approved by:	portmgr (blanket)

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

print/latex2rtf: Add CPE information

Approved by:    portmgr (blanket)

print/latex2rtf: Drop maintainership

Remove # $FreeBSD$ from Makefiles.

- Update to 2.3.17

PR:		243722
Submitted by:	yuri

print/latex2rtf: Unbreak the option LATEX2PNG

It was broken in the run-time:
/usr/local/bin/latex2png: line 140: latex: command not found
/usr/local/bin/latex2png: line 151: xelatex: command not found
and latex2png also says in its text that it requires dvipsk.

Approved by:	portmgr (unbreak)

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

Add USES=makeinfo to fix build on current.

- Update from 2.0.0 to 2.3.8
- Add stage support
- Take maintainership

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

- Kick MD5 Support

Upgrade to version 2.0.0.  According to the release notes, this version
has already incorporated the patch mentioned in the PR.

PR:             ports/138797

- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S

- Update to 1.9.19

PR:             ports/128963
Submitted by:   Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
Approved by:    maintainer timeout (joerg; 1 month)

SHA256ify

Approved by: krion@

This port requires Perl 5 for building.

Pointed out by: kris

Update to version 1.9.15.

Reorganize a bit so documentation will be installed into
${PREFIX}/share/doc/latex2rtf/.

Do install the GNU info pages, too.  Unfortunately, the info pages as
shipped needed the removal of various ^Ms (patch-ab), and the addition
of dir node meta tags (patch-ac).

SIZEify (maintainer timeout)

Upgrade to vendor release 1.9.14.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Upgrade to version 1.9.13, now maintained on sourceforge.

PR:             ports/38120
Submitted by:   Ying-Chieh Liao <ijliao@freebsd.org>

Remove share/latex2rtf on deinstall    

Upgrade to current version.  Unfortunately, the distfile contains a stray   .o
file we need to remove first...    

Convert category print to new layout.