08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

00:42 swills 

print/splix: update to last commit, cleanup

PR:		238297
Submitted by:	Philipp Erbelding <philipp@copythat.de>

 

15:33 mat 

Cleanup $() variables in ports Makefiles.

Mostly replace with ${}, but sometime, replace with $$() because it is
what was intended in the first place. (I think.)

Sponsored by:	Absolight

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

14:58 tijl 

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

16:46 tijl 

Bump PORTREVISION for jbigkit library version bump.

Approved by:	portmgr (implicit)

 

19:40 rene 

- Add stage support [1]
- cups-image(1) is part of print/cups-image, so depend on that port
  instead of on print/cups-base [1]
- Convert USE_GMAKE and USE_BZIP2 to their corresponding USES [1]
- Fix pkg-plist
- Use modern LIB_DEPENDS
- Add dependency on print/cups-client for cups-config(1) and correctly
  reference it
- Bump PORTREVISION

PR:		ports/188864 [1]
Submitted by:	Zsolt Udvari <udvzsolt@gmail.com>

 

22:44 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

 

19:54 ak 

- Remove indefinite article from COMMENT
- Convert to new options framework
- Remove hardcoded CC/CXX [1]

PR:	171295 [1]
Submitted by:	Christian Mangin <christian.mangin@gmail.com> [1]

 

18:42 swills 

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

05:26 dinoex 

- update png to 1.5.10

21:57 pgollucci 

- Prep for removal of print/cpusddk now part of print/cups-base

PR:             ports/144050
Submitted by:   Marcin Wisnicki <mwisnicki+freebsd@gmail.com>

01:59 linimon 

Reset tomasv@megalogika.lt at his request, as his company no longer uses
FreeBSD.

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

06:08 miwi 

- Update to 2.0.0

PR:             137456
Submitted by:   Tomas Verbaitis <tomasv@megalogika.lt> (maintainer)

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

13:58 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

16:44 pav 

- Update to 1.1.0

PR:             ports/118179
Submitted by:   Tomas Verbaitis <tomasv@megalogika.lt> (maintainer)

22:09 lme 

Update to 1.0.2

PR:             ports/117640
Submitted by:   Tomas Verbaitis <tomasv (AT) megalogika.lt> (maintainer)
Approved by:    miwi (mentor)

13:14 nivit 

SpliX is a set of CUPS printer drivers for SPL (Samsung Printer Language)
printers. Below is a non-exhaustive list of currently supported printers. Note
that only SPL2 and SPLc printers are currently supported!

Manufacturer    Model       State
Xerox           Phaser 6100     Works
Samsung         CLP-300         Non-working
Samsung         CLP-500     Works
Samsung         CLP-510     Works
Samsung         CLP-600     Non-working
Samsung         ML-1510     Works
Samsung         ML-1520     Works
Samsung         ML-1610     Works
Samsung         ML-1710     Works
Samsung         ML-1740     Works

(Only the first 15 lines of the commit message are shown above )