07:31 Yuri Victorovich (yuri) 

science/{,py-}segyio: update 1.9.11 → 1.9.12

Reported by:	portscout

    d712362

15:21 Po-Chuan Hsieh (sunpoet) 

science/py-segyio: Convert to USE_PYTHON=pytest

Approved by:	portmgr (blanket)
With hat:	python

    ac7910b

07:18 Charlie Li (vishwin) 

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

    5d4139f

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

21:37 Yuri Victorovich (yuri) 

science/{,py-}segyio: Update 1.9.9 → 1.9.11

Reported by:	portscout

    a45a546

20:32 Daniel Engberg (diizzy) 

*/*: Update path set in BUILD_DEPENDS for CMake

Commit b23ea4e2d2f51b53d8915fe9fd7b4efbdd575e38 changed its location to
devel/cmake-core

Approved by:	portmgr (blanket)

    e942e56

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

13:46 Dmitry Marakasov (amdmi3) 

science/py-segyio: switch to USES=pytest and fix tests

Reported by:	reprise
Approved by:	portmgr blanket

    0e7dd0d

13:38 Po-Chuan Hsieh (sunpoet) 

science/py-segyio: Fix build with setuptools 58.0.0+

With hat:	python

    1fe9019

17:10 Yuri Victorovich (yuri) 

science/{,py-}segyio: Update 1.9.8 -> 1.9.9

Reported by:	portscout

    d42090b

23:56 Yuri Victorovich (yuri) 

science/{,py-}segyio: Update 1.9.7 -> 1.9.8

Reported by:	portscout

    f44aa1f

07:06 Yuri Victorovich (yuri) 

science/py-segyio: Fix tests

    967708f

01:31 Yuri Victorovich (yuri) 

science/py-segyio: Update 1.9.6 -> 1.9.7

    5ed6365

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

05:47 yuri 

science/py-segyio: Update 1.9.5 -> 1.9.6

Reported by:	portscout

 

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

13:46 kai 

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

 

20:36 yuri 

science/py-segyio: Update 1.9.4 -> 1.9.5

Reported by:	portscout

 

19:57 yuri 

science/py-segyio: Update 1.9.3 -> 1.9.4

Reported by:	portscout

 

17:17 linimon 

Add compiler:c++11-lang to USES to fix build on GCC-based systems:

 
/wrkdirs/usr/ports/science/py-segyio/work-py37/segyio-1.9.3/segyio/segyio.cpp:1461:
error: 'uint16_t' is not a member of 'std'

Approved by:	portmgr (tier-2 blanket)

 

02:56 yuri 

New port: science/py-segyio: Python binding for segyio, the seismic data library