non port: security/cryptlib/Makefile |
SVNWeb
|
Number of commits found: 42 |
Mon, 20 Mar 2023
|
[ 10:53 Alex Dupre (ale) ] f7d3d88
security/cryptlib: update to 3.4.6 release.
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 857c05f (Only the first 10 of 840 ports in this commit are shown above. )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Wed, 1 Dec 2021
|
[ 17:25 Piotr Kubaj (pkubaj) ] c547e9e
security/cryptlib: fix build on powerpc64le
|
Sat, 27 Nov 2021
|
[ 12:54 Piotr Kubaj (pkubaj) ] 1a42545
security/cryptlib: enable on powerpc and powerpc64
|
Tue, 31 Aug 2021
|
[ 19:49 Bernhard Froehlich (decke) ] 4e3a465
security/cryptlib: Add CPE information
Approved by: portmgr (blanket)
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Tue, 10 Oct 2017
|
[ 21:31 linimon ] (Only the first 10 of 44 ports in this commit are shown above. )
For ports that are explicitly enabled on armv6, also enable them
on armv7. This has not been tested with an -exp run but should
"do no harm".
PR: 221894 (partial)
|
Mon, 26 Jun 2017
|
[ 23:44 linimon ] (Only the first 10 of 13 ports in this commit are shown above. )
Sort ARCHS. Pet portlint.
Approved by: portmgr (tier-2 blanket)
|
Thu, 12 Jan 2017
|
[ 09:16 ale ]
Update to 3.4.3 release.
PR: 215983
Submitted by: Yuri Victorovich <yuri@rawbw.com>
|
Tue, 19 Jul 2016
|
[ 11:04 mat ] (Only the first 10 of 174 ports in this commit are shown above. )
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 25 Mar 2015
|
[ 08:30 marino ] (Only the first 10 of 26 ports in this commit are shown above. )
security category: Remove $PTHREAD_LIBS
approved by: PTHREAD blanket
|
Thu, 19 Feb 2015
|
[ 11:34 ale ]
Add armv6 as supported arch.
PR: 197609
Submitted by: egypcio@googlemail.com
|
Tue, 11 Mar 2014
|
[ 06:23 antoine ]
Unbreak
|
Mon, 10 Mar 2014
|
[ 17:01 bapt ] (Only the first 10 of 51 ports in this commit are shown above. )
Convert s* to USES=zip
|
Wed, 22 Jan 2014
|
[ 08:18 ale ]
Use relative paths in symlinks.
Submitted by: danfe
|
Tue, 21 Jan 2014
|
[ 16:33 ale ]
Remove gmake dependency and stagify.
PR: ports/185404
Submitted by: Stephen Hurd <shurd@sasktel.net>
|
Fri, 20 Sep 2013
|
[ 22:55 bapt ] (Only the first 10 of 1016 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
security)
|
Fri, 12 Jul 2013
|
[ 16:26 bapt ]
Mark jobs unsafe
Convert to USES=gmake
|
Fri, 29 Mar 2013
|
[ 19:33 cs ] (Only the first 10 of 94 ports in this commit are shown above. )
- Remove A/An in COMMENT
- Trim Header where applicable
|
Tue, 10 Jan 2012
|
[ 11:52 ale ]
Update to 3.4.1 release.
|
Fri, 4 Mar 2011
|
[ 14:43 ale ]
Update to 3.4.0 release and add support for amd64.
|
Fri, 25 Jul 2008
|
[ 14:34 pav ] (Only the first 10 of 213 ports in this commit are shown above. )
- Remove USE_GCC where it can be satisfied with base compiler on following
FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT
|
Fri, 30 Mar 2007
|
[ 12:53 ale ]
Update to 3.3.1 release.
|
Mon, 13 Nov 2006
|
[ 07:24 ale ]
Fix build on 4.x.
|
Sat, 7 Oct 2006
|
[ 08:02 ale ]
Try to fix on 4.X.
|
Sun, 17 Sep 2006
|
[ 08:40 ale ]
The tarball has been rerolled with many post 3.3 release fixes,
so bump PORTREVISION, too.
|
Thu, 14 Sep 2006
|
[ 18:36 ale ]
Update to 3.3 release.
|
Fri, 14 Jul 2006
|
[ 07:06 ale ]
Update to 3.2.3 release:
- OPTIONSify (respect CFLAGS / OPTIMIZED_CFLAGS)
- Add support for PKCS#11 tokens
- Grap maintainership
|
Tue, 24 Jan 2006
|
[ 12:26 pav ]
- Unbreak
PR: ports/92224
Submitted by: Johan van Selst <johans@stack.nl>
|
Sun, 22 Jan 2006
|
[ 21:21 kris ]
BROKEN: Hard-codes libc_r linkage
|
Fri, 16 Sep 2005
|
[ 15:35 mnag ]
Update to 3.2.2
Approved by: pav (mentor)
|
Sun, 24 Apr 2005
|
[ 18:54 kris ]
Update to 3.2 to fix fetching.
|
Wed, 6 Apr 2005
|
[ 09:38 danfe ]
- Unbreak. Distfile has changed. A diff between the contents of the
original distfile and the new one shows that the changes consist of
inconsequential whitespace, and ones that NUL-terminate couple of
strings (linebuffers). Hence PORTREVISION bump. [1]
- Improve on Makefile header (reindent, spaces -> tabs)
PR: ports/79591
Submitted by: Sam Lawrance <boris(at)brooknet.com.au>
|
Mon, 28 Feb 2005
|
[ 04:24 kris ]
BROKEN: Size mismatch
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
Fri, 30 Jan 2004
|
[ 09:29 perky ]
Update to 3.1
|
Mon, 11 Aug 2003
|
[ 02:15 foxfair ]
Update to cryptlib 3.1 beta5, and change MAKE_ARGS to ALL_TARGET to prevent
a 'make all' failure.
|
Fri, 18 Jul 2003
|
[ 13:12 arved ]
Build only on i386.
PR: 54455
Submitted by: Mark Linimon <linimon@lonesome.com>
|
Wed, 9 Jul 2003
|
[ 18:20 arved ]
- install cryptlib.h
- respect CFLAGS
PR: 54167[1]
Submitted by: John Engelhart <johne@zang.com>
|
Sun, 22 Jun 2003
|
[ 08:32 foxfair ]
Change port name to cryptlib-3.1.b4 and satisfy naming rules in handbook.
|
Sat, 21 Jun 2003
|
[ 06:11 foxfair ]
Add cryptlib 3.1, a powerful security programming toolkit.
PR: 53397
Submitted by: me
|
Number of commits found: 42 |