notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: There is a known problem on production with searching pkg-plist - it returns no results. This problem is not present on stage.freshports.org
non port: security/distcache/Makefile
SVNWeb

Number of commits found: 26

Wed, 7 Sep 2022
[ 21:10 Stefan Eßer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:857c05f8674c5f4c990f49f9d0fb7034ebd340fe  commit hash:857c05f8674c5f4c990f49f9d0fb7034ebd340fe  commit hash:857c05f8674c5f4c990f49f9d0fb7034ebd340fe  857c05f  (Only the first 10 of 840 ports in this commit are shown above. View all ports for this commit)
security: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Kapranoff <kappa@rambler-co.ru>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Leidinger <netchild@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 26 Jul 2021
[ 01:55 Alexey Dokuchaev (danfe) search for other commits by this committer ]    commit hash:8e20ddc545290fe2036764bbf03e967a6cb06f06  commit hash:8e20ddc545290fe2036764bbf03e967a6cb06f06  commit hash:8e20ddc545290fe2036764bbf03e967a6cb06f06  8e20ddc 
security/distcache: fix strip-related comment and take maintainership

The comment said ``INSTALL_TARGET=install-strip isn't working'', that
is, does not strip shared libraries as expected, while actually this is
not a bug but intended behavior, per this quote from the INSTALL file:

  [...] Fortunately, the GNU autotools have built-in support for this
  functionality, all you need to do is to specify "make install-strip"
  instead of "make install".  Note however that only executables are
  stripped, libraries are not touched [...]
Thu, 22 Jul 2021
[ 09:53 Alexey Dokuchaev (danfe) search for other commits by this committer ]    commit hash:426c0efca9f0077e2ce01d73ed890edfffb3989a  commit hash:426c0efca9f0077e2ce01d73ed890edfffb3989a  commit hash:426c0efca9f0077e2ce01d73ed890edfffb3989a  426c0ef 
security/distcache: unbreak the build when using OpenSSL from ports

While appropriate --with-ssl=${OPENSSLBASE} switch is passed to the
configure script, the SSLeay_version -> OpenSSL_version adjustment
was performed not relative to ${OPENSSLINC}, which is wrong.  Also,
this check cannot be executed at `post-patch' because OpenSSL from
ports is not yet available at this early stage.

PR:	236820
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Sat, 11 Jul 2020
[ 08:07 danfe search for other commits by this committer ] Original commit   Revision:541954
Minor improvements to r541400:
- Correct macro to check for is OPENSSL_NO_SSL3_METHOD, not OPENSSL_NO_SSL3
- While no-op, be formally correct and run the tests from the $TEST_WRKSRC
Tue, 7 Jul 2020
[ 10:07 danfe search for other commits by this committer ] Original commit   Revision:541400
- Unbreak the build against contemporary versions of OpenSSL
- Hoop up a simple test to our framework so we know it works

PR:	236820
Tue, 6 Aug 2019
[ 17:43 sunpoet search for other commits by this committer ] Original commit   Revision:508278
Update MASTER_SITES and unbreak this port

PR:		239663 (based on)
Reported by:	Walter Schwarzenfeld <w.schwarzenfeld@utanet.at>
Mon, 5 Aug 2019
[ 06:37 antoine search for other commits by this committer ] Original commit   Revision:508138 (Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Mark BROKEN: unfetchable
Sat, 6 Apr 2019
[ 08:08 antoine search for other commits by this committer ] Original commit   Revision:498072
Mark BROKEN on FreeBSD 12 and 13

Reported by:	pkg-fallout
MFH:		2019Q2
Mon, 12 Feb 2018
[ 07:35 yuri search for other commits by this committer ] Original commit   Revision:461561
security/distcache: Update to 1.5.1

Also replaced PORTVERSION with DISTVERSION.

Reported by:	portscout
Approved by:	tcberner (mentor, implicit)
Mon, 12 Sep 2016
[ 13:23 marino search for other commits by this committer ] Original commit   Revision:421923
security/distcache: Configure SSL base, fix build on LibreSSL

While here, simplify existing patch for modern FreeBSD and DragonFly
Thu, 3 Mar 2016
[ 16:30 amdmi3 search for other commits by this committer ] Original commit   Revision:410054
- Add LICENSE
- Don't install useless docfiles
- Switch to options helpers
Sun, 7 Sep 2014
[ 16:25 marino search for other commits by this committer ] Original commit   Revision:367566
Stage security/distcache; Apache24 optionally depends on it
Tue, 29 Jul 2014
[ 21:43 adamw search for other commits by this committer ] Original commit   Revision:363399 (Only the first 10 of 277 ports in this commit are shown above. View all ports for this commit)
Convert some more USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)
Fri, 4 Jul 2014
[ 12:46 bapt search for other commits by this committer ] Original commit   Revision:360609 (Only the first 10 of 67 ports in this commit are shown above. View all ports for this commit)
Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)

With hat:	portmgr
Fri, 20 Sep 2013
[ 22:55 bapt search for other commits by this committer ] Original commit   Revision:327769 (Only the first 10 of 1016 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
security)
Sun, 5 Aug 2012
[ 23:19 dougb search for other commits by this committer ] Original commit  (Only the first 10 of 936 ports in this commit are shown above. View all ports for this commit)
Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op
Sat, 4 Dec 2010
[ 07:34 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1730 ports in this commit are shown above. View all ports for this commit)
Sync to new bsd.autotools.mk
Sat, 22 Aug 2009
[ 00:35 amdmi3 search for other commits by this committer ] Original commit  (Only the first 10 of 349 ports in this commit are shown above. View all ports for this commit)
- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S
Sun, 2 Aug 2009
[ 19:36 mezz search for other commits by this committer ] Original commit  (Only the first 10 of 1514 ports in this commit are shown above. View all ports for this commit)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
Thu, 21 Aug 2008
[ 06:18 rafan search for other commits by this committer ] Original commit  (Only the first 10 of 1030 ports in this commit are shown above. View all ports for this commit)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 19 Apr 2008
[ 17:56 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 2842 ports in this commit are shown above. View all ports for this commit)
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Thu, 23 Feb 2006
[ 10:40 ade search for other commits by this committer ] Original commit  (Only the first 10 of 2514 ports in this commit are shown above. View all ports for this commit)
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Tue, 15 Nov 2005
[ 06:52 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1438 ports in this commit are shown above. View all ports for this commit)
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Mon, 18 Apr 2005
[ 19:04 pav search for other commits by this committer ] Original commit 
Distributed session caching tools and APIs, primarily for SSL/TLS servers
though perhaps useful for other (non-SSL/TLS) circumstances.

Also includes a self-contained network abstraction library (libnal), and the
sslswamp SSL/TLS benchmark/test utility.

PR:             ports/79878
Submitted by:   Marcel Prisi <marcel.prisi@virtua.ch>

Number of commits found: 26