non port: security/nmap/Makefile |
SVNWeb
|
Number of commits found: 147 (showing only 100 on this page) |
Sun, 21 May 2023
|
[ 22:13 Cy Schubert (cy) ] 226aaca
security/nmap: Update 7.93 --> 7.94
|
Wed, 28 Sep 2022
|
[ 15:54 Cy Schubert (cy) ] e5274f9
security/nmap: Update to 7.93
PR: 266623
Reported by: takefu@airport.fm
|
Thu, 8 Sep 2022
|
[ 15:43 Stefan Eßer (se) ] 986beaa (Only the first 10 of 174 ports in this commit are shown above. )
Move more WWW entries from pkg-descr files into Makefiles
The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.
Approved by: portmgr (implicit)
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 857c05f (Only the first 10 of 840 ports in this commit are shown above. )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Fri, 29 Apr 2022
|
[ 18:07 Cy Schubert (cy) ] 4a16044
security/nmap: Revert 7a374db8e5ba3916d4e97e799e0e90c47ba1e62b
Revert "security/nmap: PCAP option conflicts with pcap in 13-STABLE base".
security/nmap builds fine with PCAP enabled now.
This reverts commit 7a374db8e5ba3916d4e97e799e0e90c47ba1e62b.
PR: 261242
Reported by: eugen
MFH 2022Q2
|
Sun, 16 Jan 2022
|
[ 18:17 Cy Schubert (cy) ] 7a374db
security/nmap: PCAP option conflicts with pcap in 13-STABLE base
PCAP option also conflicts with pcap in 14-CURRENT base. Mark the option
BROKEN. This is the same fix as b1dcaf64da857d32153590fed40804f460da9bb9
for 14-CURRENT.
PR: 261242
MFH: 2022Q1
|
Mon, 6 Dec 2021
|
[ 18:12 Cy Schubert (cy) ] cb950ff
security/nmap: Make PCAP option non-default
All supported versions of FreeBSD provide pcap support. Disable the
PCAP option by default.
MFH after: 3 days
|
[ 18:12 Cy Schubert (cy) ] b1dcaf6
security/nmap: PCAP option conflicts with pcap in 14-CURRENT base
PCAP option conflicts with pcap in 14-CURRENT base. Mark the option
BROKEN.
MFH after: 3 days
|
Tue, 6 Jul 2021
|
[ 18:19 Cy Schubert (cy) ] f12ae49
security/nmap: Fix broken --proxy
Upstream broke --proxy in 7.90 and was fixed after 7.91 and is yet to be
released.
PR: 256968
Submitted by: Ting-Wei Lan <lantw44@gmail.com>
Reported by: Ting-Wei Lan <lantw44@gmail.com>
Obtained from: Upstream 169d7e5a922ef8e63b51ee2bdf4fd4ad60ed2689
MFH: 2020Q3
|
Mon, 31 May 2021
|
[ 05:30 Cy Schubert (cy) ] cdce550a
security/nmap: Assume maintainership
As per ohauer's email, assume maintainership.
Requested by: ohauer
Approved by: ohauer (implicit)
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sun, 11 Oct 2020
|
[ 11:45 ohauer ]
- update to 7.91
|
Mon, 5 Oct 2020
|
[ 11:04 ohauer ] (Only the first 10 of 11 ports in this commit are shown above. )
- update to 7.90
Relnotes: https://nmap.org/changelog#7.90
|
Sun, 5 Jan 2020
|
[ 15:57 woodsb02 ]
security/nmap: Fix build on 11i386, 11arm, 11arm64
Fix patches to configure scripts to only add -libverbs if found in base
PR: 242987
Reported by: Dries Michiels <driesm.michiels@gmail.com>
Reported by: garga
MFH: 2020Q1
|
Mon, 30 Dec 2019
|
[ 12:38 woodsb02 ]
security/nmap: Update to 7.80
- Remove local patches incorporated upstream.
- Add patches to add missing libibverbs dependency when linking
libpcap statically (required to allow build on FreeBSD >= 12.0).
(See similar fix applied to port net-mgmt/dhcdrop in r499639).
Changes this release:
https://seclists.org/nmap-announce/2019/0
Approved by: ohauer (maintainer timeout)
Differential Revision: https://reviews.freebsd.org/D22730
|
Wed, 9 Oct 2019
|
[ 12:20 bapt ] (Only the first 10 of 20 ports in this commit are shown above. )
Drop the ipv6 virtual category for s* category as it is not relevant anymore
|
Sat, 31 Mar 2018
|
[ 22:22 ohauer ]
- update to 7.70
- add option for bundled libssh2
- add option for bundled libpcap
- add upstream patch for arp-ioctl.c
- change URL's from http to https
PR: 221522
Submitted by: lightside
|
Tue, 30 Jan 2018
|
[ 21:02 ohauer ] (Only the first 10 of 19 ports in this commit are shown above. )
- update to 7.60
- regenerate patches with makepatch
PR: ports/221522
|
Fri, 19 May 2017
|
[ 09:46 eugen ]
Make nmap work with INET4-only kernels:
- add new FreeBSD-specific patch;
- remove invalid comment from Makefile (it did build but produced run-time
error);
- bump PORTREVISION.
PR: 217558
Approved by: ohauer (maintainer timeout, 10 weeks), vsevolod (mentor)
|
Wed, 21 Dec 2016
|
[ 12:32 ohauer ]
- update to 7.40
- 12 new NSE scripts
- Hundreds of updated OS and version detection detection signatures
- Faster brute force authentication cracking and other NSE library improvements
Full Changelog:
https://nmap.org/changelog.html
|
Fri, 21 Oct 2016
|
[ 18:08 ohauer ]
- update to 7.31
Nmap 7.31 [2016-10-20]
o Fixed the way Nmap handles scanning names that resolve to the same IP. Due to
changes in 7.30, the IP was only being scanned once, with bogus results
displayed for the other names. The previous behavior is now restored.
[Tudor Emil Coman]
o [GH#350] Fix an assertion failure due to floating point error in equality
comparison, which triggered mainly on OpenBSD:
assertion "diff <= interval" failed: file "timing.cc", line 440
This was reported earlier as [GH#472] but the assertion fixed there was a
different one. [David Carlier]
(Only the first 15 lines of the commit message are shown above )
|
[ 12:51 mat ] (Only the first 10 of 718 ports in this commit are shown above. )
${RM} already has -f.
PR: 213570
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
|
Thu, 29 Sep 2016
|
[ 22:21 ohauer ]
- update to 7.30
Changelog:
https://nmap.org/changelog.html
|
Sat, 17 Sep 2016
|
[ 00:13 woodsb02 ]
security/zenmap: Update to 7.25 BETA2 and use security/nmap as MASTERDIR
security/nmap:
- Ensure MAINTAINER and COMMENT do not clobber those of slave port
- Add .if !defined(MASTERDIR) to prevent inclusion in slave port
- Do not include bsd.port.options.mk, as none of the features are used
security/zenmap:
- Convert to slave of security/nmap to ensure they are updated in lockstep
- Inherently update to 7.25 BETA2 (current version of security/nmap)
- Take maintainership
- Remove redundant port header variables included from MASTERDIR
- PKGNAME of zenmap achieved using PKGNAMEPREFIX=ze and PORTNAME=nmap
- Inherit LICENSE_FILE, as zenmap/COPYING states it is the same as nmap
- Set directory variables so they are not inhereted from MASTERDIR
- Convert post-extract to post-patch, as it is modifying WRKSRC files
- Fix REINPLACE command, as it was leaving the line with nothing but a
single ',' and causing the build to fail
- Do not download external zenmap icon, as one is included in distfile
Approved by: ohauer (security/nmap maintainer), mat (mentor)
Differential Revision: https://reviews.freebsd.org/D7880
|
Fri, 2 Sep 2016
|
[ 16:06 ohauer ]
- update nmap to 7.25BETA2
Full Changelog: https://nmap.org/changelog.html
Changelog (very shortened):
Nmap 7.25BETA2 [2016-09-01]
- [NSE] Upgraded NSE to Lua 5.3
- [NSE] Added 2 NSE scripts, bringing the total up to 534!
- Add 587 new fingerprints
- [NSE] Fix a crash when parsing TLS certificates
- [NSE][GH#531] Fix two issues in sslcert.lua
- [NSE][GH#234] Added a --script-timeout option for limiting run time
- [Ncat][GH#444] Added a -z option to Ncat
- [NSE] ssl-enum-ciphers now warn about 64-bit block ciphers in CBC mode
- [NSE][GH#117] Improve tftp-enum (Only the first 15 lines of the commit message are shown above )
|
Sun, 17 Jul 2016
|
[ 09:16 ohauer ]
- update to 7.25BETA1
- s/USE=OPENSSL/USES=ssl/
Some highlighs from the Changelog:
Nmap 7.25BETA1 [2016-07-13]
o [NSE] Added 6 NSE scripts, from 5 authors, bringing the total up to 533!
They are all listed at https://nmap.org/nsedoc/, and the summaries are below
(authors are listed in brackets):
+ clamav-exec detects ClamAV servers vulnerable to unauthorized clamav
command execution. [Paulino Calderon]
+ http-aspnet-debug detects ASP.NET applications with debugging enabled.
[Josh Amishav-Zlatin] (Only the first 15 lines of the commit message are shown above )
|
Wed, 30 Mar 2016
|
[ 09:43 ohauer ]
- remove ${PORTSDIR} from dependency
|
[ 04:18 ohauer ]
Nmap 7.12 [2016-03-29]
o [NSE] VNC updates including vnc-brute support for TLS security type and
negotiating a lower RFB version if the server sends an unknown higher
version. [Daniel Miller]
o [NSE] Added STARTTLS support for VNC, NNTP, and LMTP [Daniel Miller]
o Added new service probes and match lines for OpenVPN on UDP and TCP.
|
Tue, 22 Mar 2016
|
[ 20:02 ohauer ]
- update to 7.11
Changes:
o [NSE][GH#341] Added support for diffie-hellman-group-exchange-* SSH key
exchange methods to ssh2.lua, allowing ssh-hostkey to run on servers that
only support custom Diffie-Hellman groups. [Sergey Khegay]
o [NSE] Added support in sslcert.lua for Microsoft SQL Server's TDS protocol,
so you can now grab certs with ssl-cert or check ciphers with
ssl-enum-ciphers. [Daniel Miller]
|
Thu, 17 Mar 2016
|
[ 21:29 ohauer ]
- upate to version 7.10
- remove support for custom IPv4 only kernel [1]
Short summary:
- 12 new NSE scripts
- hundreds of new OS/version fingerprints
- dozens if smaller improvements and bug fixes
Full Changelog:
https://nmap.org/changelog.html
[1] nmap does no longer build agains custom kernel without IPv6!
|
Sun, 13 Dec 2015
|
[ 15:49 ohauer ]
- update to 7.01
FreeBSD related changes:
========================
Nmap 7.01 [2015-12-09]
o [NSE] [GH#254] Update the TLSSessionRequest probe in ssl-enum-ciphers to
match the one in nmap-service-probes, which was fixed previously to correct a
length calculation error. [Daniel Miller]
o [NSE] [GH#251] Correct false positives and unexpected behavior in http-*
scripts which used http.identify_404 to determine when a file was not found
on the target. The function was following redirects, which could be an
indication of a soft-404 response. [Tom Sellers]
o [NSE] [GH#241] Fix a false-positive in hnap-info when the target responds
with 200 OK to any request. [Tom Sellers]
o [NSE] [GH#244] Fix an error response in xmlrpc-methods when run against a
non-HTTP service. The expected behavior is no output. [Niklaus Schiess]
o [NSE] Fix SSN validation function in http-grep, reported by Bruce Barnett.
|
Fri, 20 Nov 2015
|
[ 06:32 ohauer ]
- update to version 7.00
Changelog:
Nmap 7.00 [2015-11-19]
o This is the most important release since Nmap 6.00 back in May 2012!
For a list of the most significant improvements and new features,
see the announcement at: https://nmap.org/7
o [NSE] Added 6 NSE scripts from 6 authors, bringing the total up to 515!
They are all listed at https://nmap.org/nsedoc/, and the summaries are below
(authors are listed in brackets):
+ targets-xml extracts target addresses from previous Nmap XML results files.
[Daniel Miller] (Only the first 15 lines of the commit message are shown above )
|
Wed, 4 Nov 2015
|
[ 17:30 ohauer ]
- update to 6.49BETA6
- use new OPTIONS targes
Parts from Changelog [1]
==========================
Nmap 6.49BETA6
o Integrated all of your IPv6 OS fingerprint submissions from April to October
(only 9 of them!). We are steadily improving the IPv6 database, but we need
your submissions. The classifier added 3 new groups, bringing the new total
to 93. Highlights: http://seclists.org/nmap-dev/2015/q4/61 [Daniel Miller]
o Integrated all of your IPv4 OS fingerprint submissions from February to
October (1065 of them). Added 219 fingerprints, bringing the new total to
4985. Additions include Linux 4.1, Windows 10, OS X 10.11, iOS 9, FreeBSD
11.0, Android 5.1, and more. Highlights: (Only the first 15 lines of the commit message are shown above )
|
Sun, 27 Sep 2015
|
[ 10:32 ohauer ] (Only the first 10 of 14 ports in this commit are shown above. )
- update to 6.49BETA5
- use DOCS instead PORTDOCS
- remove gcc workaround [1]
- (hopefully) use the correct __FreeBSD_version for SOCK_RAW
Changelog:
https://nmap.org/changelog.html
PR: 196065 [1]
PR: 200558 [2]
PR: 202139 [3]
Submitted by: sbruno@ , mikael.urankar@gmail.com [1]
Submitted by: truckman@ [2]
Submitted by: trasz@ [3]
|
Thu, 25 Dec 2014
|
[ 13:29 ohauer ]
- fix build on arm/mips
PR: 196065
Submitted by: mikael.urankar
|
Fri, 12 Sep 2014
|
[ 04:38 ohauer ]
- fix build with ccache on FreeBSD 10
PR: 193478
Submitted by: dewayne @ heuristicsystems.com.au
|
Sat, 23 Aug 2014
|
[ 12:29 ohauer ]
- update to 6.4.7
- add CPE entry
- sort pkg-plist
Changelog (entries related to the command line tools)
Nmap 6.47 [2014-08-20]
o Integrated all of your IPv4 OS fingerprint submissions since June 2013
(2700+ of them). Added 366 fingerprints, bringing the new total to 4485.
Additions include Linux 3.10 - 3.14, iOS 7, OpenBSD 5.4 - 5.5, FreeBSD 9.2,
OS X 10.9, Android 4.3, and more. Many existing fingerprints were improved.
Highlights: http://seclists.org/nmap-dev/2014/q3/325 [Daniel Miller]
o Removed the External Entity Declaration from the DOCTYPE in Nmap's XML. This (Only the first 15 lines of the commit message are shown above )
|
Fri, 18 Apr 2014
|
[ 08:05 ohauer ]
Nmap 6.46 [2014-04-18]
o [NSE] Made numerous improvements to ssl-heartbleed to provide
more reliable detection of the vulnerability.
o [Zenmap] Fixed a bug which caused this crash message:
IOError: [Errno socket error] [Errno 10060] A connection attempt failed
because the connected party did not properly respond after a period of
time, or established connection failed because connected host has
failed to
respond
The bug was caused by us adding a DOCTYPE definition to Nmap's XML
output which caused Python's XML parser to try and fetch the DTD
every time it parses an XML file. We now override that DTD-fetching
behavior. [Daniel Miller]
o [NSE] Fix some bugs which could cause snmp-ios-config and
snmp-sysdescr scripts to crash
(http://seclists.org/nmap-dev/2014/q2/120) [Patrik Karlsson]
o [NSE] Improved performance of citrixlua library when handling large XML
responses containing application lists. [Tom Sellers]
|
Tue, 15 Apr 2014
|
[ 12:12 ohauer ]
- update to nmap-6.45
Changelog:
http://nmap.org/changelog.html
Most of the changes of version 6.45 where already
adopted in the last port version
|
Fri, 11 Apr 2014
|
[ 04:52 ohauer ]
- update nmap nselib and scripts to upstream revision r32810
The update includes a working script to detect whether a server
is vulnerable to the OpenSSL Heartbleed bug (CVE-2014-0160)
http://nmap.org/nsedoc/scripts/ssl-heartbleed.html
MFH: 2014Q2
|
Sun, 12 Jan 2014
|
[ 17:56 ohauer ]
- use internal liblua instead the one from ports [1]
- update internal liblua from 5.2.2 -> 5.2.3
- bump PORTREVISION
[1] nmap use static lua for nmap, nping and ncat, after
build lua is no longer needed.
|
Mon, 25 Nov 2013
|
[ 20:49 ohauer ]
- fix security/nmap runtime on current (FreeBSD 11)
- adopt ${opt}_USE style
- remove ${opt} PKGNAMEPREFIX
- bump PORTREVISION
PR: ports/184288
Submitted by: Ruslan Makhmatkhanov <rm@FreeBSD.org>
|
Sat, 28 Sep 2013
|
[ 15:50 ohauer ]
- add stage support
|
Fri, 20 Sep 2013
|
[ 22:55 bapt ] (Only the first 10 of 1016 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
security)
|
Wed, 21 Aug 2013
|
[ 04:57 ohauer ]
- update to 6.4.0
- remove patches for EOL FreeBSD releases
- convert to OPTIONS
Changelog:
http://nmap.org/changelog.html
|
Sun, 13 Jan 2013
|
[ 22:43 ohauer ]
- Fix build for FreeBSD-7.4
(nmap 6.25 contains liblua5.2.1)
Requested by Martin Olsson <martin.olsson@sentor.se> per PM
PR: 175210
Submitted by: Jurgen <caligula@primamail.de>
Obtained from: http://lua-users.org/lists/lua-l/2011-12/msg00708.html
|
Sun, 6 Jan 2013
|
[ 18:42 ohauer ]
- update nmap to version 6.25
- fix build with clang and stdlib=libc++ [1]
Nmap 6.25 [2012-11-29]
o [NSE] Added CPE to smb-os-discovery output.
o [Ncat] Fixed the printing of warning messages for large arguments to
the -i and -w options. [Michal Hlavinka]
o [Ncat] Shut down the write part of connected sockets in listen mode
when stdin hits EOF, just as was already done in connect mode.
[Michal Hlavinka]
o [NSE] Added new fingerprints for http-enum: Sitecore, Moodle, typo3,
SquirrelMail, RoundCube. [Jesper Kuckelhahn]
o Added some new checks for failed library calls. [Bill Parker]
PR: 172358
174817
Submitted by: arrowdodger <6yearold@gmail.com> [1]
Anders N. <wicked@baot.se> (general update request)
|
Mon, 10 Dec 2012
|
[ 19:11 mm ] (Only the first 10 of 233 ports in this commit are shown above. )
Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports
|
Sun, 24 Jun 2012
|
[ 15:54 ohauer ]
- update nmap to version 6.0.1
Announcement: http://seclists.org/nmap-hackers/2012/3
Changelog: http://nmap.org/changelog.html
Some relevant changes in 6.01:
o Fixed a bug that caused Nmap to fail to find any network interface when
at least one of them is in the monitor mode. The fix was to define the
ARP_HRD_IEEE80211_RADIOTAP 802.11 radiotap header identifier in the
libdnet-stripped code. Network interfaces that are in this mode are used
by radiotap for 802.11 frame injection and reception. The bug was
reported by Tom Eichstaedt and Henri Doreau.
http://seclists.org/nmap-dev/2012/q2/449
http://seclists.org/nmap-dev/2012/q2/478
[Djalal Harouni, Henri Doreau]
o Fixed the greppable output of hosts that time-out (when --host-timeout was
used and the host timed-out after something was received from that host).
This issue was reported by Matthew Morgan. [jah]
|
Thu, 24 May 2012
|
[ 16:30 ohauer ]
- update to version 6.00
Changelog:
==========
Nmap 6.00
o Most important release since Nmap 5.00 in July 2009! For a list of
the most significant improvements and new features, see the
announcement at: http://nmap.org/6
o In XML output, <osclass> elements are now child elements of the
<osmatch> they belong to. Old output was thus:
<os><osclass/><osclass/>...<osmatch/><osmatch/>...</os>
New output is:
<os><osmatch><osclass/><osclass/>...</osmatch>...</os> (Only the first 15 lines of the commit message are shown above )
|
Sat, 10 Mar 2012
|
[ 12:31 ohauer ]
- update to version 5.61TEST5
small snippet from changelog:
http://nmap.org/changelog.html
o Integrated all of your IPv4 OS fingerprint submissions since June 2011 (about
1,900 of them)
Added about 256 new fingerprints (total 3,572)
o Integrated all of your service/version detection fingerprints submitted since
November 2010
(signature count increased to 7,423)
o Integrated your latest IPv6 OS submissions and corrections
o [NSE] Added 43(!) NSE scripts, bringing the total up to 340
o [NSE] Added 14 new protocol libraries
o [CPE] (Common Platform Enumeration) OS classification is now supported for
IPv6 OS detection
o Added a new --script-args-file option
o [NSE] Added support for decoding EIGRP broadcasts from Cisco routers to
broadcast-listener
o [NSE] Added redirect support to the http library
o Update to the latest MAC address prefix assignments from IEEE as of March 8,
2012
Test builds sponsored by redports.org
Feature safe: yes
|
Tue, 14 Feb 2012
|
[ 12:45 mm ] (Only the first 10 of 140 ports in this commit are shown above. )
Bump pcre library dependency due to 8.30 update
|
Wed, 4 Jan 2012
|
[ 16:47 ohauer ]
- update to 5.61TEST4
For detailed Changes see http://nmap.org/changelog.html
(List is simply to long ...)
Some highlights
* [NSE] Added a new httpspider library which is used for recursively
crawling web sites for information. New scripts using this
functionality include http-backup-finder, http-email-harvest,
http-grep, http-open-redirect, and http-unsafe-output-escaping. See
http://nmap.org/nsedoc/ or the list later in this file for details
on these.
* [NSE] Added a vulnerability management library (vulns.lua) to store and to
report discovered vulnerabilities.
* [NSE] Added a new script force feature. You can force scripts to
run against target ports (even if the "wrong" service is detected)
by placing a plus in front of the script name passed to --script.
See http://nmap.org/book/nse-usage.html#nse-script-selection.
* [NSE] Added 51(!) NSE scripts, bringing the total up to 297.
Build tests sponsored by redports.org
|
Tue, 4 Oct 2011
|
[ 17:17 ohauer ]
- update to version 5.61TEST2
- add workaround for system build with WITHOUT_INET6 [1]
Thanks to Kim Scarborough for sharing the libpcap workaround
PR: ports/159376 [1]
Submitted by: Alexander Panyushkin [1]
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
[ 20:29 ohauer ]
- update to 5.61TEST1
Here is the (partial) CHANGELOG since 5.59BETA1:
Nmap 5.61TEST1 [2011-09-19]
o The changelog entries below for this test release are not yet
finished or comprehensive. We'll update them soon.
o [Ncat] Updated ca-bundle.crt (primarily to remove DigiNotar).
o Fixed compilation on OS X 10.7 Lion. Thanks to Patrik Karlsson and
Babak Farroki for researching fixes.
o [NSE] Fixed SSL compressor names in ssl-enum-ciphers.nse, and (Only the first 15 lines of the commit message are shown above )
|
Fri, 1 Jul 2011
|
[ 13:23 ohauer ]
- update to version 5.59BETA1
This version includes:
o 40 new NSE scripts (plus improvements to many others)
o even more IPv6 goodness than our informal World IPv6 Day release
o 7 new NSE protocol libraries
o hundreds of bug fixes
o and much more see http://seclists.org/nmap-hackers/2011/3
|
Fri, 3 Jun 2011
|
[ 21:10 ohauer ]
- add support for gcc from ports
PR: ports/156880
Submitted by: Zhihao Yuan <lichray _at_ gmail.com>
|
Wed, 20 Apr 2011
|
[ 23:09 ohauer ]
- fix crash due to a null pointer dereference
Thanks to Christian Peron csjp@
|
Sun, 13 Feb 2011
|
[ 19:36 ohauer ]
- update to version 5.51
Nmap 5.51 [2011-02-11]
o [Ndiff] Added support for prerule and postrule scripts. [David]
o [NSE] Fixed a bug which caused some NSE scripts to fail due to the
absence of the NSE SCRIPT_NAME environment variable when loaded.
Michael Pattrick reported the problem. [Djalal]
o [Zenmap] Selecting one of the scan targets in the left pane is
supposed to jump to that host in the Nmap Output in the right pane
(but it wasn't). Brian Krebs reported this bug. [David]
o Fixed an obscure bug in Windows interface matching. If the MAC (Only the first 15 lines of the commit message are shown above )
|
Sun, 30 Jan 2011
|
[ 17:15 ohauer ]
- update to version 5.50
- always enable bpf in libdnet-stripped to support build in Jail [1]
Announcement and Changelog are very long and covered by last updates.
Announcement: http://seclists.org/nmap-hackers/2011/0
Changelog: http://nmap.org/changelog.html
PR: ports/154353 [1]
Submitted by: Mars G Miro <spry _at_ anarchy.in.the.ph> [1]
Feature safe: yes
|
Sat, 22 Jan 2011
|
[ 16:43 ohauer ]
- update nmap to version 5.36TEST4
Changelog: http://nmap.org/changelog.html
Feature safe: yes
|
Fri, 7 Jan 2011
|
[ 20:51 ohauer ]
- update nmap to version 5.36TEST3
- remove dead mirror servers
Changelog: http://nmap.org/changelog.html
Mayjor changes are NSE script related, some highlihts:
o [NSE] Added stuxnet-detect.nse
o [NSE] Added the ftp-proftpd-backdoor.nse
and many more interesting NSE scripts.
|
Fri, 3 Sep 2010
|
[ 21:16 ohauer ]
- update nmap to version 5.35DC1
- remove MD2 code from nse_openssl.cc (already removed in nmap svn)
- remove naming conflict if openssl-1.x is build with SCTP support
Approved by: glarkin (mentor)
|
Tue, 10 Aug 2010
|
[ 13:37 ohauer ]
Take Maintainership
Approved by: glarkin (mentor, implicit)
|
Mon, 9 Aug 2010
|
[ 13:28 arved ] (Only the first 10 of 14 ports in this commit are shown above. )
Drop Maintainership
PR: 149436
Submitted by: old maintainer
|
Sat, 6 Mar 2010
|
[ 14:35 wxs ]
- Fix plist and bump PORTREVISION
PR: ports/144401
Submitted by: olli hauer <ohauer@gmx.de>
Approved by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
Feature safe: yes
|
Sun, 31 Jan 2010
|
[ 00:50 miwi ]
- Update to 5.21
PR: 143331
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Thu, 16 Jul 2009
|
[ 22:17 miwi ]
- Update to 5.00
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Sun, 5 Jul 2009
|
[ 22:24 miwi ]
- Update to 4.90RC1
PR: 136295
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Tue, 21 Apr 2009
|
[ 15:36 wxs ]
- Add patch to work around versions of FreeBSD with broken
getaddrinfo(3) (7.1 and earlier, and -CURRENT before the end of March
2009).
PR: ports/133779
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Mon, 13 Apr 2009
|
[ 09:53 dhn ]
- Update to 4.85.b7
PR: ports/133547
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
Approved by: miwi (mentor)
|
Wed, 24 Sep 2008
|
[ 14:47 miwi ]
- Update to 4.76
PR: 127379
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Sun, 7 Sep 2008
|
[ 10:20 oliver ]
fix build when openssl is not in base but in $LOCALBASE
Approved by: maintainer
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
Sun, 3 Aug 2008
|
[ 16:09 miwi ]
- Update to 4.68
PR: 126211
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Tue, 6 May 2008
|
[ 13:26 miwi ]
- Update to 4.62
PR: 123401
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Mon, 14 Apr 2008
|
[ 00:53 clsung ]
- Update nmap to 4.60 and fix moved MASTER_SITES.
Also fixed portlint warnings about Makefile structure.
PR: ports/122728
Submitted by: maintainer (Daniel Roethlisberge)
|
Fri, 14 Mar 2008
|
[ 21:30 miwi ] (Only the first 10 of 13 ports in this commit are shown above. )
- Update to 4.52
PR: 119673
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Sat, 4 Aug 2007
|
[ 11:41 gabor ] (Only the first 10 of 291 ports in this commit are shown above. )
- Remove the DESTDIR modifications from individual ports as we have a new,
fully chrooted DESTDIR, which does not need such any more.
Sponsored by: Google Summer of Code 2007
Approved by: portmgr (pav)
|
Thu, 14 Jun 2007
|
[ 14:11 jmelo ]
- Fix mastersite.
PR: ports/113203
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sat, 23 Dec 2006
|
[ 15:29 shaun ]
- Fix build on FreeBSD 4.x.
PR: ports/106911
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Tue, 12 Dec 2006
|
[ 20:32 miwi ]
- Update to 4.20
PR: ports/106567
Submitted by: Jose Fernandes<jose@diasfernandes.pt>
Approved by: maintainer
|
Sat, 8 Jul 2006
|
[ 05:32 clsung ]
- update to 4.11
PR: ports/99833
Submitted by: tjs <tjs_AT_cdpa dot nsysu dot edu dot tw>
Approved by: maintainer (Daniel Roethlisberger)
|
Sun, 25 Jun 2006
|
[ 19:04 erwin ]
Update to 4.10
PR: 99461
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Tue, 6 Jun 2006
|
[ 01:30 mnag ]
- Able security/nmap open more than 128 bpfs.
- Bump PORTREVISION
PR: 98080
Submitted by: marck
Approved by: maintainer
|
Wed, 15 Mar 2006
|
[ 14:30 sem ]
- Add patch resolving an infinite loop in the scan engine
- Bump PORTREVISION
PR: ports/94264
Submitted by: maintainer
Requested by: Alan Amesbury <amesbury@umn.edu>
|
Sat, 18 Feb 2006
|
[ 11:20 ehaupt ]
Fix build of "slave port" (security/nmapfe) on 4.x by using GCC 3.2+
PR: 93452
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
|
Fri, 10 Feb 2006
|
[ 23:42 krion ]
Update to 4.01
PR: ports/93153
Submitted by: krion
Approved by: maintainer
|
Thu, 2 Feb 2006
|
[ 08:13 krion ]
Update to 4.00
PR: ports/92684
Submitted by: krion
Approved by: maintainer
|
Wed, 14 Dec 2005
|
[ 08:46 barner ]
Update nmap and nmapfe to 3.95.
Notable upstream changes:
* new help/usage screen and man page
* new man page currently only available in en, pt_PT and pt_BR
* nmapfe is now a shiny GTK2 application
Submitted by: Daniel Roethlisberger <daniel@roe.ch> (maintainer)
PR: ports/90371
|
Fri, 16 Sep 2005
|
[ 11:05 garga ]
- Update to 3.93
PR: ports/86113
Submitted by: maintainer
|
Thu, 8 Sep 2005
|
[ 23:59 lawrance ]
Give maintainership to submitter
PR: ports/85870
Submitted by: Daniel Roethlisberger <daniel@roe.ch>
|
[ 13:18 krion ]
Update to version 3.90
|
Mon, 18 Jul 2005
|
[ 03:49 linimon ] (Only the first 10 of 13 ports in this commit are shown above. )
With portmgr hat on, reset eik's ports since he has been inactive for
several months (not responding to email).
Discussed among: portmgr team
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
Sat, 26 Feb 2005
|
[ 15:39 krion ]
Update to version 3.81
PR: ports/77425
Submitted by: krion
Approved by: maintainer timeout
|
Tue, 30 Nov 2004
|
[ 18:10 eik ]
update to version 3.77
|
Number of commits found: 147 (showing only 100 on this page) |