FreshPorts -- The Place For Ports notbugIf you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Port details
py-certbot Let's Encrypt client
0.25.1,1 security on this many watch lists=11 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: python@FreeBSD.org search for ports maintained by this maintainer
Port Added: 23 Jun 2016 10:22:42
Also Listed In: python
License: APACHE20
In short: getting and installing SSL/TLS certificates made easy.

Certbot is a tool to automatically receive and install
X.509 certificates to enable TLS on servers. The client will
interoperate with the Let's Encrypt CA which will be issuing
browser-trusted certificates for free.

It's all automated:

The tool will prove domain control to the CA and submit a CSR
(Certificate Signing Request).

If domain control has been proven, a certificate will get issued and
the tool will automatically install it.

WWW: https://github.com/certbot/certbot
SVNWeb : Homepage : PortsMon
There is no configure plist information for this port

To install the port: cd /usr/ports/security/py-certbot/ && make install clean
To add the package: pkg install py27-certbot

PKGNAME: py27-certbot

distinfo:

TIMESTAMP = 1529370484
SHA256 (certbot-0.25.1.tar.gz) = 5c23e5186133bb1afd805be5e0cd2fb7b95862a8b0459c9ecad4ae60f933e54e
SIZE (certbot-0.25.1.tar.gz) = 305393


NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. py27-setuptools>0 : devel/py-setuptools@py27
  2. python2.7 : lang/python27
Runtime dependencies:
  1. py27-acme>=0.25.1,1 : security/py-acme@py27
  2. py27-configargparse>=0.9.3 : devel/py-configargparse@py27
  3. py27-configobj>0 : devel/py-configobj@py27
  4. py27-cryptography>=1.2 : security/py-cryptography@py27
  5. py27-parsedatetime>=1.3 : devel/py-parsedatetime@py27
  6. py27-openssl>0 : security/py-openssl@py27
  7. py27-pyrfc3339>0 : devel/py-pyrfc3339@py27
  8. py27-pytz>0 : devel/py-pytz@py27
  9. py27-setuptools>=1.0 : devel/py-setuptools@py27
  10. py27-six>0 : devel/py-six@py27
  11. py27-zope.component>0 : devel/py-zope.component@py27
  12. py27-zope.interface>0 : devel/py-zope.interface@py27
  13. py27-setuptools>0 : devel/py-setuptools@py27
  14. python2.7 : lang/python27

This port is required by:

for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options
     No options to configure

USES:
python

pkg-message:
===========================================================================

This port installs the "standalone" client only, which does not use and
is not the certbot-auto bootstrap/wrapper script.

The simplest form of usage to obtain certificates is:

 # sudo certbot certonly --standalone -d , [domain2, ... domainN]>

NOTE:

The client requires the ability to bind on TCP port 80 or 443 (depending
on the --preferred-challenges option used). If a server is running on that
port, it will need to be temporarily stopped so that the standalone server
can listen on that port to complete the challenge authentication process.

For more information on the 'standalone' mode, see:

  https://certbot.eff.org/docs/using.html#standalone

The certbot plugins to support apache and nginx certificate installation
will be made available in the following ports:

 * Apache plugin: security/py-certbot-apache
 * Nginx plugin: security/py-certbot-nginx

===========================================================================

Master Sites:
  1. https://files.pythonhosted.org/packages/source/c/certbot/
  2. https://pypi.org/packages/source/c/certbot/
Notes from UPDATING
These upgrade notes are taken from /usr/ports/UPDATING
  • 2017-11-30
    Affects: */py*
    Author: mat@FreeBSD.org
    Reason: 
      Ports using Python via USES=python are now flavored.  All the py3-* ports
      have been removed and folded into their py-* master ports.
    
      People using Poudriere 3.2+ and binary packages do not have to do anything.
    
      For other people, to build the Python 3.6 version of, for example,
      databases/py-gdbm, you need to run:
    
        # make FLAVOR=py36 install
    
    
Port Moves
  • port moved here from security/py-letsencrypt on 2016-06-23
    REASON: The LetsEncrypt project has renamed the utility

Number of commits found: 32

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
20 Jun 2018 00:52:59
Original commit files touched by this commit  0.25.1,1
Revision:472836
miwi search for other commits by this committer
- Update to 0.25.1

PR:		229131
Sponsored by:	iXsystems Inc.
09 Jun 2018 19:59:15
Original commit files touched by this commit  0.25.0,1
Revision:472084
miwi search for other commits by this committer
- Update to 0.25.0
- While here switch to PY_FLAVOR

Sponsored by:	iXsystems Inc.
03 May 2018 18:41:35
Original commit files touched by this commit  0.24.0,1
Revision:468967
sunpoet search for other commits by this committer
Update to 0.24.0

Changes:	https://github.com/certbot/certbot/blob/master/CHANGELOG.md
		https://github.com/certbot/certbot/milestones?state=closed
14 Apr 2018 12:01:21
Original commit files touched by this commit  0.23.0,1
Revision:467310
mat search for other commits by this committer
Note that both security/py-acme and security/py-certbot have PORTEPOCH set.

Sponsored by:	Absolight
12 Apr 2018 11:07:37
Original commit files touched by this commit  0.23.0,1
Revision:467144
sunpoet search for other commits by this committer
Update to 0.23.0

- Update and sort RUN_DEPENDS

Changes:	https://github.com/certbot/certbot/milestones?state=closed
20 Mar 2018 12:03:59
Original commit files touched by this commit  0.22.2,1
Revision:465083
mat search for other commits by this committer
Update acme/certbot ports to 0.22.2.

Sponsored by:	Absolight
08 Mar 2018 14:49:08
Original commit files touched by this commit  0.22.0,1
Revision:463891
miwi search for other commits by this committer
- Update to 0.22.0
22 Feb 2018 14:29:20
Original commit files touched by this commit  0.21.1,1
Revision:462595
mat search for other commits by this committer
As all the acme/certbot have the same version, store it in one place.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D14262
22 Feb 2018 14:27:41
Original commit files touched by this commit  0.21.1,1
Revision:462594
mat search for other commits by this committer
Update security/py-certbot to 0.21.1.

Bring it into python@'s fold.

PR:		225754
Submitted by:	mat
Approved by:	maintainer timeout
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D14262
22 Jan 2018 15:44:06
Original commit files touched by this commit  0.21.0,1
Revision:459659
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.21.0

Common:

- Update PORTVERSION and distinfo checksum (0.21.0)

security/py-acme:

- Add security/py-josepy to RUN_DEPENDS

Changelog:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0210---2018-01-17

Reviewed by:	koobs
Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D13981
08 Dec 2017 10:22:42
Original commit files touched by this commit  0.20.0,1
Revision:455779
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.20.0

Common:

- Update PORTVERSION and distinfo checksum (0.20.0)
- Regenerate patch

Changelog:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0200---2017-12-06

Reviewed by:	koobs (maintainer)
Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D13410
30 Nov 2017 15:50:34
Original commit files touched by this commit  0.19.0,1
Revision:455210  Sanity Test Failure
mat search for other commits by this committer
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
22 Oct 2017 23:37:17
Original commit files touched by this commit  0.19.0,1
Revision:452688
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.19.0

Common:

- Update PORTVERSION and distinfo checksum (0.19.0)

Changelog:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0190---2017-10-04

Reviewed by:	koobs (maintainer, py-certbot)
Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D12482
25 Sep 2017 09:10:21
Original commit files touched by this commit  0.18.2,1
Revision:450577
koobs search for other commits by this committer
security/py-{acme,certbot}: Update to 0.18.2

certbot produces an error [1] when used with versions of pyOpenSSL > 17.2.0,
who's port was recently updated [2] to 17.3.0.

This version update contains a fix for that issue.

While I'm here, improve pkg-message usage invocation example and provide
a link to documentation

[1] https://github.com/certbot/certbot/issues/5111
[2] http://svnweb.freebsd.org/changeset/ports/450350

Reported by:	Daniel Boothby (via private email)
Approved by:	cpm (py-acme maintainer)
14 Sep 2017 11:25:39
Original commit files touched by this commit  0.18.1,1
Revision:449834
cpm search for other commits by this committer
security/py-{acme,certbot}: update to 0.18.1

Common:

- Update PORTVERSION and distinfo checksum (0.18.1)

security/py-certbot:

- Fix permissions error when upgrading certbot-auto
- Fix user-agent string and help/error message output when the new certbot-auto
  path is used.

If certbot-auto was running as an unprivileged user and it upgraded from
0.17.0 to 0.18.0, it would crash with a permissions error and would need to
be run again to sucessfully complete the upgrade. This has been fixed and
(Only the first 15 lines of the commit message are shown above View all of this commit message)
08 Aug 2017 09:12:27
Original commit files touched by this commit  0.17.0,1
Revision:447536
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.17.0

Common:

- Update PORTVERSION and distinfo checksum (0.17.0)

py-certbot:

- Silence explicitly called command

Changelog:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0170---2017-08-02

Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D11916
06 Aug 2017 11:28:15
Original commit files touched by this commit  0.16.0_1,1
Revision:447458
koobs search for other commits by this committer
security/py-certbot: Relax Python version-spec, support Python 3.x

certbot has supported Python 3 (3.3+) since the 0.14.0 release [1]. Update
the USES=python:<version-spec> to match, allowing Python 3 builds. [2]

Update acme (security/py-acme) RUN_DEPENDS entry to use PORTVERSION not
PKGVERSION (that includes PORTEPOCH/PORTREVISION) which caused the
dependency to be incorrectly reported as unsatisfied if either was
defined. Further, since *_DEPENDS version-specifiers compare against
installed package versions, only a version that includes PORTEPOCH
and/or PORTREVISION is available, so use >= not ==. [3]

While I'm here, enable 'concurrent' to automatically produce
version-suffixed files.

[1] https://github.com/certbot/certbot/issues/4507

PR:		220469 221043 [3]
Submitted by:	Kamigishi Rei <spambox haruhiism net> [2]
Reported by:	amdmi3 [3]
MFH:		2017Q3
10 Jul 2017 09:00:40
Original commit files touched by this commit  0.16.0,1
Revision:445423
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.16.0

Common:

- Update PORTVERSION and distinfo checksum (0.16.0)

Changelog:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0160---2017-07-05

Reviewed by:	koobs (maintainer, py-certbot)
Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D11517
26 Jun 2017 11:56:17
Original commit files touched by this commit  0.15.0_1,1
Revision:444364
cpm search for other commits by this committer
security/py-{acme,certbot}: fix missing dependency on py-mock

Common:

- Move py-mock requirement to dev_extras in setup.py
- Bump PORTREVISION

PR:		220274
Submitted by:	cpm
Reported by:	Randy Westlund <rwestlun@gmail.com>
Approved by:	koobs (maintainer, py-certbot)
MFH:		2017Q2
24 Jun 2017 08:51:54
Original commit files touched by this commit  0.15.0,1
Revision:444208
cpm search for other commits by this committer
security/py-{acme,certbot}: update to 0.15.0

Common:

- Update PORTVERSION and distinfo checksum (0.15.0)
- Update RUN/TEST dependencies
- Remove unnecessary patches (applied upstream)

Changes:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0150---2017-06-08

Reviewed by:	koobs
Approved by:	koobs (maintainer, py-certbot)
Differential Revision:	https://reviews.freebsd.org/D10612
20 May 2017 20:44:13
Original commit files touched by this commit  0.13.0_2,1
Revision:441335
cpm search for other commits by this committer
security/py-certbot: Fix configargparse 0.12.0 regression

This is caused by the recent release of configargparse version 0.12.0.
The variable ACTION_TYPES_THAT_DONT_NEED_A_VALUE was changed from a set
to a tuple in that release.

Traceback (most recent call last):
  File "/usr/local/bin/certbot", line 11, in <module>
    load_entry_point('certbot==0.13.0', 'console_scripts', 'certbot')()
  File "/usr/local/lib/python2.7/site-packages/certbot/main.py", line 738, in
main
    args = cli.prepare_and_parse_args(plugins, cli_args)
  File "/usr/local/lib/python2.7/site-packages/certbot/cli.py", line 1072, in
prepare_and_parse_args
    helpful.add_deprecated_argument("--agree-dev-preview", 0)
  File "/usr/local/lib/python2.7/site-packages/certbot/cli.py", line 726, in
add_deprecated_argument
    self.parser.add_argument, argument_name, num_args)
  File "/usr/local/lib/python2.7/site-packages/certbot/util.py", line 440, in
add_deprecated_argument
    configargparse.ACTION_TYPES_THAT_DONT_NEED_A_VALUE.add(ShowWarning)
AttributeError: 'tuple' object has no attribute 'add'

PR:		219306
Reported by:	GKK <netbackup.gs@gmail.com>
Approved by:	koobs (maintainer)
Obtained
from:	https://github.com/certbot/certbot/commit/42d07d756df0cf96c9d20b44e772858391d48384
30 Apr 2017 14:26:41
Original commit files touched by this commit  0.13.0_1,1
Revision:439825
cpm search for other commits by this committer
security/py-{acme,certbot}: Make argparse a conditional dependency

Backport an upstream patch [1][2] to setup.py making argparse a conditional
dependency. Without this change, the following error is observed at run-time:

  pkg_resources.DistributionNotFound: The 'argparse' distribution was not found
and is required by certbot

This is due to the separate argparse distribution (via PyPI) no longer being
required for Python versions >= 2.7 and >= 3.2, as they contain the argparse
module in the standard library.

Since FreeBSD only supports Python versions with the argparse module built in,
*and* having removed the devel/py-argparse port, the install_requires=argparse
dependency cannot be satisfied, as install_requires is only relevant for non
standard library (PyPI) packages/dependencies.

[1] https://github.com/certbot/certbot/pull/4554
[2] https://github.com/certbot/certbot/issues/4485

PR:		218973
Reported by:	olgeni
Approved by:	koobs (py-certbot, maintainer)
Obtained
from:	https://github.com/certbot/certbot/commit/89af460792fcdfb23c7dc4f9fcdec1bfa07a2656
Differential Revision:	https://reviews.freebsd.org/D10546
29 Apr 2017 12:03:20
Original commit files touched by this commit  0.13.0,1
Revision:439749
cpm search for other commits by this committer
security/py-certbot: update to 0.13.0

- Update PORTVERSION and distinfo checksum (0.13.0)
- Update pkg-descr to cope with the renaming to "certbot"

Changes:
https://github.com/certbot/certbot/blob/master/CHANGELOG.md#0130---2017-04-06

Approved by:	koobs (maintainer)
Differential Revision: https://reviews.freebsd.org/D10317
26 Apr 2017 15:41:49
Original commit files touched by this commit  0.12.0,1
Revision:439461
cpm search for other commits by this committer
security/py-certbot: fix incorrect instructions in pkg-message

- Fix the example certonly command

While here, update pkg-message to cope with the renaming to "certbot"

PR:		218758
Submitted by:	cpm (based on)
Reported by:	Justin Clift <justin@postgresql.org>
Approved by:	koobs (maintainer)
MFH:		2017Q2
18 Mar 2017 01:05:06
Original commit files touched by this commit  0.12.0,1
Revision:436370
cpm search for other commits by this committer
security/py-{acme,certbot}: update to 0.12.0

- Update PORTVERSION and distinfo checksum (0.12.0)

Approved by:	koobs (maintainer timeout 2 weeks, py-certbot)
Differential Revision:	D9886
16 Mar 2017 19:23:49
Original commit files touched by this commit  0.11.1,1
Revision:436290
antoine search for other commits by this committer
Rename python setuptools ports to better match other python ports

Reviewed by:	mat, sunpoet
With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D9983
20 Feb 2017 16:02:06
Original commit files touched by this commit  0.11.1,1
Revision:434470
cpm search for other commits by this committer
security/py-{acme,certbot}: update to 0.11.1

- Update PORTVERSION and distinfo checksum (0.11.1)
- Update WWW in py-acme/pkg-descr
- Rename py-letsencrypt to py-certbot in py-certbot/pkg-message

Approved by:	koobs (maintainer timeout 17 days, py-certbot)
Differential Revision:	D9421
01 Feb 2017 13:20:12
Original commit files touched by this commit  0.10.2,1
Revision:433032
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.10.2

- Update PORTVERSION and distinfo checksum (0.10.2)

Approved by:	koobs (maintainer timeout 2 weeks, py-certbot)
Differential Revision:	D9167
17 Oct 2016 09:14:48
Original commit files touched by this commit  0.9.3,1
Revision:424101
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.9.3

- Update PORTVERSION and distinfo checksum (0.9.3)

Approved by:	koobs (mentor)
Differential Revision:	D8261
13 Oct 2016 15:29:12
Original commit files touched by this commit  0.9.2,1
Revision:423926
cpm search for other commits by this committer
security/py-{acme,certbot}: Update to 0.9.2

Common:

Update PORTVERSION and distinfo checksum (0.9.2)
security/py-acme:

Add dns/py-dnspython dependency required to support both Python 2 and Python 3

Approved by:	koobs
Differential Revision: D8223
24 Jun 2016 21:21:08
Original commit files touched by this commit  0.8.1,1
Revision:417447
brnrd search for other commits by this committer
security/py-certbot: Complete renaming from letsencrypt

  - Rename relevant occurences in pkg-descr and pkg-message

PR:		210508
23 Jun 2016 10:22:35
Original commit files touched by this commit  0.8.1,1
Revision:417359
brnrd search for other commits by this committer
security/py-certbot: Rename from py-letsencrypt and update

  - Move security/py-letsencrypt to security/py-certbot
  - Update security/py-acme to 0.8.1
  - Update security/py-certbot to 0.8.1
  - Update python dependencies

PR:		209584

Number of commits found: 32

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
slurm-wlmJun 16
nodeJun 15
node6Jun 15
node8Jun 15
libgcrypt*Jun 14
password-storeJun 14
asterisk13*Jun 12
libresslJun 12
libressl-develJun 12
opensslJun 12
openssl-develJun 12
asterisk13Jun 11
asterisk15Jun 11
asterisk15Jun 11
chromiumJun 10

14 vulnerabilities affecting 116 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities

Last updated:
2018-06-16 15:43:50


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 34425
Broken 82
Deprecated 102
Ignore 334
Forbidden 2
Restricted 160
No CDROM 76
Vulnerable 32
Expired 12
Set to expire 89
Interactive 0
new 24 hours 12
new 48 hours20
new 7 days43
new fortnight88
new month15986

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2018 Dan Langille. All rights reserved.