| Port details |
- py-vpn-slice vpnc-script replacement for easy split-tunnel VPN setup
- 0.16.1 security
 =0      0.16.1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2021-11-23 08:00:09
- Last Update: 2023-07-09 10:20:29
- Commit Hash: c51c400
- Also Listed In: net-vpn python
- License: GPLv3+
- WWW:
- https://github.com/dlenski/vpn-slice
- Description:
- This is a replacement for the vpnc-script used by OpenConnect or VPNC.
Instead of trying to copy the behavior of standard corporate VPN clients, which
normally reroute all your network traffic through the VPN, this one tries to
minimize your contact with an intrusive VPN. This is also known as a
split-tunnel VPN, since it splits your traffic between the VPN tunnel and your
normal network interfaces.
vpn-slice makes it easy to set up a split-tunnel VPN:
- By default, it only routes traffic for specific hosts or subnets through the
VPN.
- It automatically looks up named hosts, using the VPN's DNS servers, and adds
entries for them to your /etc/hosts (which it cleans up after VPN
disconnection), however it does not otherwise alter your /etc/resolv.conf at
all.
- It has many additional options to customize routing and lookup (for example,
--route-splits to additionally route traffic for specific subnets requested by
the server). Run vpn-slice --help to see them all.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}vpn-slice>0:security/py-vpn-slice@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/security/py-vpn-slice/ && make install clean
- To add the package, run one of these commands:
- pkg install security/py-vpn-slice
- pkg install py39-vpn-slice
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-vpn-slice listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-vpn-slice
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1688166324
SHA256 (vpn-slice-0.16.1.tar.gz) = 28d02dd1b41210b270470350f28967320b3a34321d57cc9736f53d6121e9ceaa
SIZE (vpn-slice-0.16.1.tar.gz) = 34925
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-dnspython>=0,1 : dns/py-dnspython@py39
- py39-setproctitle>=0 : devel/py-setproctitle@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- security_py-vpn-slice
- USES:
- python
- pkg-message:
- For install:
- This software requires that procfs filesystem be mounted;
# echo "proc /proc procfs rw 0 0" >> /etc/fstab
# mount /proc
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.16.1
09 Jul 2023 10:20:29
 |
Po-Chuan Hsieh (sunpoet) |
security/py-vpn-slice: Update to 0.16.1
- Update LICENSE
- Add LICENSE_FILE
- Update version requirement of RUN_DEPENDS
- Update pkg-descr
- Take maintainership
Changes: https://github.com/dlenski/vpn-slice/commits/master |
0.15
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.15
18 Jan 2023 08:47:30
|
Koichiro Iwao (meta) |
security/*: add net-vpn category on some ports |
0.15
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
0.15
30 Oct 2022 13:22:25
|
Jan Beich (jbeich)
Author: Jose G. Juanino |
*/*: drop maintainership
PR: 267431 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.15
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.15
27 Nov 2021 16:26:27
|
Dries Michiels (driesm) |
security/py-vpn-slice: Add NO_ARCH
Approved by: 0mp (mentor), portmgr (blanket)
Differential Revision: https://reviews.freebsd.org/D33105 |
0.15
23 Nov 2021 06:54:02
|
Dries Michiels (driesm)
Author: Jose G. Juanino |
security/py-vpn-slice: New port
Customized VPN split-tunnel. vpnc-script replacement for easy and
secure split-tunnel VPN setup.
PR: 259831
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D33074 |
As an Amazon Associate I earn from qualifying purchases.