ansible Radically simple IT automation
2.7.9 sysutils =12

Maintainer: lifanov@FreeBSD.org
Port Added: 2013-02-20 18:58:36
Last Update: 2019-03-18 00:28:58
SVN Revision: 496115
Also Listed In: python
License: GPLv3+

Ansible is a radically simple configuration-management, deployment,
task-execution, and multinode orchestration framework.

WWW: https://www.ansible.com/

SVNWeb : Homepage : PortsMon

There is no configure plist information for this port.

Dependency line: py27-ansible>0:sysutils/ansible

Conflicts:

• CONFLICTS:
  • ansible1-*
  • ansible23-*
  • ansible24-*
  • ansible25-*
  • ansible26-*

Conflicts Matches:

There are no Conflicts Matches for this port. This is usually an error.

---

To install the port: cd /usr/ports/sysutils/ansible/ && make install clean
To add the package: pkg install py27-ansible

PKGNAME: py27-ansible

Package flavors (<flavor>: <package>)

• py27: py27-ansible
• py36: py36-ansible

distinfo:

TIMESTAMP = 1552868700
SHA256 (ansible-2.7.9.tar.gz) = 6ee59d561c206f82e842f3aae4b56fc9a8b83ffecba4cab33bdb56f781717ea7
SIZE (ansible-2.7.9.tar.gz) = 11830476

---

Slave ports

1. sysutils/ansible1
2. sysutils/ansible23
3. sysutils/ansible24
4. sysutils/ansible25
5. sysutils/ansible26

---

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. py27-setuptools>0 : devel/py-setuptools@py27
2. python2.7 : lang/python27

Runtime dependencies:

1. py27-Jinja2>0 : devel/py-Jinja2@py27
2. py27-cryptography>0 : security/py-cryptography@py27
3. py27-jmespath>0 : devel/py-jmespath@py27
4. py27-netaddr>0 : net/py-netaddr@py27
5. py27-paramiko>0 : security/py-paramiko@py27
6. py27-yaml>0 : devel/py-yaml@py27
7. py27-setuptools>0 : devel/py-setuptools@py27
8. python2.7 : lang/python27

This port is required by:

for Run

1. net-mgmt/semaphore
2. sysutils/py-ansible-runner

* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

---

Configuration Options

===> The following configuration options are available for py27-ansible-2.7.9:
     DOCS=on: Build and/or install documentation
     EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings

---

USES:

cpe python

---

Master Sites:

1. http://releases.ansible.com/ansible/

• 2018-11-04

  Affects: users of sysutils/ansible*

  Author: lifanov@FreeBSD.org

  Reason: 
    Default Ansible configuration location changed to LOCALBASE/etc/ansible
    instead of a per-flavor directory. If you use system-wide Ansible
    configuration, please migrate from a flavored directory to a common
    one:
  
    # mv /usr/local/etc/py27-ansible /usr/local/etc/ansible
  
  

• 2018-10-14

  Affects: users of sysutils/ansible

  Author: lifanov@FreeBSD.org

  Reason: 
    Ansible has been updated to 2.7.0. Please follow the porting guide
    to update the rulesets:
  
    https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_2.7.html
  
    If you wish to stay with 2.6 version, you can switch
    to new sysutils/ansible2.6 port, which tracks stable 2.6 branch:
  
    # pkg set -n ansible:ansible26
  
  

• 2018-05-18

  Affects: users of sysutils/ansible*

  Author: lifanov@FreeBSD.org

  Reason: 
    Ansible ports are now flavored. Package names for Ansible changed
    to include python version. Poudriere and package users don't need
    to do anything.
  
    To rename an installed package to match the new naming scheme,
    for example, for ansible24, run:
  
     # pkg set -n ansible24:py27-ansible24
  
  

• 2017-04-12

  Affects: users of sysutils/ansible

  Author: lifanov@FreeBSD.org

  Reason: 
    The default value for ansible_python_interpreter has been changed
    to match the upstream /usr/bin/python. If managing FreeBSD systems,
    adjust the hosts database to explicitly set a valid python interpreter:
  
    [freebsd]
    host1
  
    [freebsd_vars]
    ansible_python_interpreter=/usr/local/bin/python2.7
  
  

• 2016-01-13

  Affects: users of sysutils/ansible

  Author: lifanov@mail.lifanov.com

  Reason: 
    Ansible 2.0.0 introduces a number of incompatible configuration changes.
    Please read changelog and migrate current configuration:
  
    https://raw.githubusercontent.com/ansible/ansible/v2.0.0.0-1/CHANGELOG.md
  
    Ansible 1.9.* will be provided as sysutils/ansible1 until the next update
    of 2.0 branch.
  
  

• 2014-03-02

  Affects: users of sysutils/ansible

  Author: rm@FreeBSD.org

  Reason: 
    This is an major update and changes were introduced in ansible 1.5, that
    are not backward compatible. Please refer changelog there before update:
    https://raw.github.com/ansible/ansible/v1.5.0/CHANGELOG.md
  
  

update ansible ports

ansible to 2.7.9
ansible26 to 2.6.15

ansible: switch to security/py-cryptography

For ansible >= 2.4, py-cryptography is preferred upstream.

PR:		236436
Reported by:	John W. O'Brien <john@saltant.com>

update sysutils/ansible to 2.7.8

update sysutils/ansible to 2.7.5

https://github.com/ansible/ansible/blob/v2.7.5/changelogs/CHANGELOG-v2.7.rst

update sysutils/ansible to 2.7.2

https://github.com/ansible/ansible/blob/v2.7.2/changelogs/CHANGELOG-v2.7.rst

update sysutils/ansible* ports

sysutils/ansible: 2.7.1
Changes:
https://github.com/ansible/ansible/blob/v2.7.1/changelogs/CHANGELOG-v2.7.rst

sysutils/ansible26: 2.6.7
Changes:
https://github.com/ansible/ansible/blob/v2.6.7/changelogs/CHANGELOG-v2.6.rst

sysutils/ansible25: 2.5.11
Changes:
https://github.com/ansible/ansible/blob/v2.5.11/changelogs/CHANGELOG-v2.5.rst

All ports: move default configuration directory back to LOCALBASE/etc/ansible as
before the flavors conversion. Configuration is version-specific and not
Python-specific
and this is a more intuitive location.

PR:		232377
Reported by:	Tomoyuki Sakurai (default configuration path)

update sysutils/ansible to 2.7.0

This is a major release. Please see changelog and migration guide:

https://github.com/ansible/ansible/blob/2.7/changelogs/CHANGELOG-v2.7.rst
https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_2.7.html

This also introduces sysutils/ansible26, which will track the 2.6 stable
branch.

update sysutils/ansible to 2.6.5

https://github.com/ansible/ansible/blob/v2.6.5/changelogs/CHANGELOG-v2.6.rst

update sysutils/ansible to 2.6.4

Changes:
https://github.com/ansible/ansible/blob/v2.6.4/changelogs/CHANGELOG-v2.6.rst

update sysutils/ansible to 2.6.3

Changes:
https://github.com/ansible/ansible/blob/v2.6.3/changelogs/CHANGELOG-v2.6.rst

update sysutils/ansible to 2.6.2

Changes:
https://github.com/ansible/ansible/blob/v2.6.2/changelogs/CHANGELOG-v2.6.rst

fix symlinks for ansible when non-default version is installed

The issue is that before stage, other binaries are links to ansible:

bin/ansible-vault -> bin/ansible
bin/ansible-playbook -> bin/ansible

During stage, these get renamed with a suffix, like 3.6, but the
target of the symlink doesn't change:

bin/ansible-vault-3.6 -> bin/ansible
bin/ansible-playbook-3.6 -> bin/ansible

This either creates broken links if the package for the default
Python version is not installed or it creates links to the
wrong binary if it is.

Thank you Andreas Sommer for the fix!

PR:		229960
Submitted by:	Andreas Sommer

update sysutils/ansible to 2.6.1

Changes:
https://github.com/ansible/ansible/blob/v2.6.1/changelogs/CHANGELOG-v2.6.rst

update sysutils/ansible to 2.6.0

This also introduces sysutils/ansible25 port to track 2.5 release branch.

Changes:
https://github.com/ansible/ansible/blob/v2.6.0/changelogs/CHANGELOG-v2.6.rst

update sysutils/ansible to 2.5.5

Changes:
https://github.com/ansible/ansible/blob/v2.5.5/changelogs/CHANGELOG-v2.5.rst

update sysutils/ansible to 2.5.3

This is a bugfix release.

add tests and FLAVORS to Ansible ports

Most of the work was done by koobs. Thank you!

PR:		228268
Submitted by:	koobs
Reported by:	Christopher Hall

sysutils/ansible: add 'sesu' become method

This adds CA sesu as a "become" method.

Pull request: https://github.com/ansible/ansible/pull/27376

PR:		227934
Submitted by:	mi

update sysutils/ansible to 2.5.2

Changes:
https://github.com/ansible/ansible/blob/v2.5.2/changelogs/CHANGELOG-v2.5.rst

update sysutils/ansible to 2.5.1

Changes:
https://github.com/ansible/ansible/blob/v2.5.1/changelogs/CHANGELOG-v2.5.rst

update sysutils/ansible to 2.5.0

Announcement: https://www.ansible.com/blog/ansible-2.5-traveling-space-and-time
Changes:
https://github.com/ansible/ansible/blob/v2.5.0/changelogs/CHANGELOG-v2.5.rst

sysutils/ansible* - prepare for sysutils/ansible update

o Remove vanity "Created by:" line
o Add upcoming ansible24 port to CONFLICTS

update sysutils/ansible to 2.4.3.0

This is a bugfix release.
Changes: https://github.com/ansible/ansible/blob/v2.4.3.0-1/CHANGELOG.md

Fix INDEX

Reported by:	cperciva@

reinstate sysutils/ansible23

PKGBASE collision has been resolved
This reverts r455222

disable flavors for sysutils/ansible

This is an utility and not a library, so it doesn't make sense to
generate additional packages.

Remove sysutils/ansible23, it clashes with python flavor work
Do not add back without checking PKGBASE uniqueness for all flavors first

With hat:	portmgr

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

update conflicts after addition of sysutils/ansible23

update sysutils/ansible to 2.4.2.0

This is a bugfix release.

Changes: https://github.com/ansible/ansible/blob/v2.4.2.0-1/CHANGELOG.md

update sysutils/ansible to 2.4.1.0

Changes: https://github.com/ansible/ansible/blob/v2.4.1.0-1/CHANGELOG.md

fix setting value for ansible_python_interpreter

Thanks to mat for fixing qa.sh for this!

PR:		222561
Submitted by:	gwright@antiope.com
Reported by:	gwright@antiope.com, Alex Mur (private email)

fix botched sed command refactoring

Reported by:	Alex Mur (private email)

update sysutils/ansible to 2.4.0.0

This is a major feature release.
Changes: https://github.com/ansible/ansible/blob/v2.4.0.0-1/CHANGELOG.md

update sysutils/ansible to 2.3.2.0

This is a bugfix release.
Changes: https://github.com/ansible/ansible/blob/v2.3.2.0-1/CHANGELOG.md

- Update WWW

Approved by:	portmgr blanket

remove note about SEM option

This option is no longer in Python ports.

update sysutils/ansible to 2.3.1.0

Relnotes:	https://github.com/ansible/ansible/blob/v2.3.1.0-1/CHANGELOG.md
Security:	15a04b9f-47cb-11e7-a853-001fbc0f280f

sysutils/ansible: add dependency on py-jmespath

o add missing dependency on py-jmespath required by built-in jsonquery
o sort dependency list

PR:		219359
Submitted by:	Dave Cottlehuber <dch@skunkwerks.at>

sysutils/ansible: fix prompt for become-method=su

PR:		218724
Reported by:	Guillaume Bibaut <yom@iaelu.net>

sysutils/ansible1: fix packaging

Also, bump expiration date again since I touched it.
I plan to keep it around until sysutils/py-ploy_ansible is migrated.

update sysutils/ansible to 2.3.0.0

This is a major release!

https://raw.githubusercontent.com/ansible/ansible/v2.3.0.0-1/CHANGELOG.md

o stop "fixing" default interpreter of /usr/bin/python
o remove NETADDR option and depend on py-netaddr unconditionally

Differential Revision:	https://reviews.freebsd.org/D10165

update sysutils/ansible to 2.2.2.0

update sysutils/ansible to 2.2.1.0

Reviewed by:	matthew
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D9265

Only reinplace the target of the symlinks, not the symlinks

PR:		216309

fix patch for ec84ff6

PR:		216103
Submitted by:	freebsd@sh0shin.org
Reviewed by:	matthew
Approved by:	matthew (mentor)
MFH:		2017Q1
Differential Revision:	https://reviews.freebsd.org/D9189

sysutils/ansible: address CVE-2016-9587

Reviewed by:	matthew
Approved by:	matthew (mentor)
MFH:		2017Q1
Security:	CVE-2016-9587
Security:	https://vuxml.FreeBSD.org/freebsd/a93c3287-d8fd-11e6-be5c-001fbc0f280f.html
Differential Revision:	https://reviews.freebsd.org/D9158

update MAINTAINER to my FreeBSD.org email

Reviewed by:	matthew
Approved by:	matthew (maintainer)
Differential Revision:	https://reviews.freebsd.org/D8782

Change RUN_DEPENDS back to py-paramiko 1.x, for making ports depends on it
build without conflict

Backport patch 872594b from upstream

This is a FreeBSD specific fix to the handling of rcvars -- this fixes
the case where the rcvar did not previously exist in /etc/rc.conf or
other places the rc system might look for them.

https://github.com/ansible/ansible-modules-core/commit/872594b49a69a1f3795e0de3f7cf0194b6bdfd53

PR:		214322
Reported by:	Thomas Steen Rasmussen
Approved by:	lifanov@mail.lifanov.com (maintainer)

Upgrade to 2.2.0.0

Changelog:
https://raw.githubusercontent.com/ansible/ansible/v2.2.0.0-1/CHANGELOG.md

PR:		213974
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Update to 2.1.2.0

PR:		213111
Submitted by:	xmj
Approved by:	lifanov@mail.lifanov.com (maintainer)

Update to 2.1.1.0.

PR:		211439
Submitted by:	Nikolai Lifanov <lifanov at mail.lifanov.com> (maintainer)

sysutils/ansible: add patch to fix cron module

PR:		209789
Submitted by:	Dmitry Marakasov <amdmi3@FreeBSD.org>
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)
Approved by:	bdrewery (implicit, mentor)

Update to 2.1.0.0

Press
release:	https://www.redhat.com/en/about/press-releases/red-hat-debuts-ansible-21-network-automation-containers-microsoft-windows-and-azure

ChangeLog:	https://raw.githubusercontent.com/ansible/ansible/v2.1.0.0-1/CHANGELOG.md

PR:		209769
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Make the service module respect the sleep option.

PR:		208996
Submitted by:	me
Approved by:	Nikolai Lifanov <lifanov at mail.lifanov.com>
		(maintainer)

Security update to 2.0.2.0

Amongst many other updates, this addresses CVE-2016-3096, which is a
predictable temporary file name vulnerability that affects users of
LXC containers.

ChangeLog:	https://raw.githubusercontent.com/ansible/ansible/v2.0.2.0-1/CHANGELOG.md

PR:		208932
Submitted by:	lifanov@mail.lifanov.com (maintainer)
MFH:		2016Q2
Security:	253c6889-06f0-11e6-925f-6805ca0b3d42

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Update to 2.0.1.0

This is primarily a bugfix release.  This also includes a merge of the
two local bugfix patches.

ChangeLog:	
https://raw.githubusercontent.com/ansible/ansible/v2.0.1.0-1/CHANGELOG.md

PR:		207490
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Backport upstream patch to fix overquoting of commands run via su

PR:		206591
Submitted by:	leeb@ratnaling.org
Approved by:	lifanov@mail.lifanov.com (maintainer)
Obtained
from:	https://github.com/ansible/ansible/commit/6bf2f45ff52d252dbada6a1860416fa603be56bd

- Add dependency on py-netaddr needed for ipaddr() filter
- Switch to options helpers

PR:		206656
Submitted by:	amdmi3
Approved by:	lifanov@mail.lifanov.com (maintainer)

Fix default low-level command submission
  -- on FreeBSD root's default shell (/bin/csh) would fail to
     understand the /bin/sh syntax ansible issues.

Import the fix from upstream.

PR:		206498
Submitted by:	matthew
Approved by:	lifanov@mail.lifanov.com (maintainer)
Obtained
from:	https://github.com/ansible/ansible/commit/8647fdc7f25ba1c707c5333ca1581a1fa0ffe566

Add notes to pkg-message about the SEM option being required in python

PR:		206320
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Update to 2.0.0.2

PR:		206290
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Update to 2.0.0.1

This contains several minor fixes and adds back man pages (like in 1.x
series).

This allows us to remove a heavy build dependency on asciidoc toolkit.

PR:		206206
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Upgrade ansible to 2.0.0

Provide an ansible1 slave port with ansible-1.9.4 as there are
incompatible changes between ansible-1.9.4 and ansible-2.0.0

Add note in UPDATING

PR:		206174
Submitted by:	lifanov@mail.lifanov.com (maintainer)

Update LICENSE to new GPLv3+

PR:		206161
Submitted by:	maintainer

- Update to 1.9.4

PR:		203723
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

sysutils/ansible: update 1.9.2 -> 1.9.3 and add NO_ARCH

Changes:
https://raw.githubusercontent.com/ansible/ansible/v1.9.3-1/CHANGELOG.md

PR:		202895
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

Fix managing non-FreeBSD hosts.

PR:		202799
Submitted by:	merlin@merlinsbox.net
Approved by:	maintainer

sysutils/ansible: update 1.9.1 -> 1.9.2

* Security fix for CVE-2015-3908
* Security fix for jail, zone and chroot plugins
* Bugfixes:
https://raw.githubusercontent.com/ansible/ansible/v1.9.2-1/CHANGELOG.md

PR:		201200
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)
MFH:		2015Q2

Upgrade to 1.9.1

PR:		199766
Submitted by:	maintainer

sysutils/ansible: 1.8.4 -> 1.9.0.1

Changes:
https://raw.githubusercontent.com/ansible/ansible/v1.9.0.1-1/CHANGELOG.md

PR:		198926
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

Upgrade to version 1.8.4.

PR:		197787
Submitted by:	maintainer

Fix issue #83 of ansible-modules-extras with pull request #204 ("Even
though the password param is specified as optional, the rabbitmq_user
module fails when it is not provided.")

PR:		197573
Submitted by:	olgeni
Reviewed by:	maintainer

Fix quoting of function identifiers in postgresql_privs (issue 703
in ansible/ansible-modules-core on GitHub).

PR:		197325
Submitted by:	olgeni
Approved by:	maintainer

Restore Ansible modules by switching back to release distfiles.

PR:			195936
Submitted by:		maintainer

sysutils/ansible: Update to 1.8.2

- Update to 1.8.2
- Remove MASTERFILES, DISTFILES (unnecessary with USE_GITHUB)
- Update COMMENT
- Remove ACCELERATE option, move pycrypto to RUN_DEPENDS

While I'm here:

- Add LICENSE_FILE
- pkg-descr: Strip trailing slash from WWW: URL
- GH_PROJECT defaults to ${PORTNAME}, remove it

Changes:

  https://raw.githubusercontent.com/ansible/ansible/v1.8.2/CHANGELOG.md

PR:		195557
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

Fix typo.

PR:		ports/194263
Submitted by:	thomas
Approved by:	mentors (implicit)

Update sysutils/ansible from 1.7.1 to 1.7.2
several bug fixes and improvements

PR:		ports/193926
Submitted by:	lifanov@mail.lifanov.com (maintainer)
Approved by:	mentors (implicit)

sysutils/ansible: switch to USES=python, upgrade version 1.7 => 1.7.1

PR:		192679
Submitted by:	maintainer (Nikolai Lifanov)

- Update from 1.6.10 to 1.7

PR:		192451
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com>

sysutils/ansible: update to 1.6.10

PR:		192190
Submitted by:	maintainer

- Update from 1.6.8 to 1.6.9

PR:		ports/192111
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com>

- Update to 1.6.8

Changes:	https://raw.githubusercontent.com/ansible/ansible/v1.6.8/CHANGELOG.md
PR:		ports/192017
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

sysutils/ansible: Fix packaging for pkg_* users

Strip the absolute prefix from the ansible.desktop PLIST_FILES entry which
was causing pkg_create to fail.

Submitted by:	wg
Approved by:	portmgr (blanket)

sysutils/ansible: update to 1.6.6

PR:		191561
Submitted by:	maintainer

- Update to 1.6.5

Changes:	https://raw.githubusercontent.com/ansible/ansible/v1.6.5/CHANGELOG.md
PR:		ports/191418
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- Update to 1.6.3

Changes:	https://raw.githubusercontent.com/ansible/ansible/v1.6.3/CHANGELOG.md
PR:		ports/190882
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- Update to 1.6.2
- Include patch from https://github.com/ansible/ansible/pull/7539

Changes to what's given in the PR were discussed and submitted by
email.

PR:		ports/190231
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

Update to 1.6.1.

PR:		ports/189396
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- Update to 1.5.5

PR:		ports/188855
Submitted by:	maintainer

- Update to 1.5.4, announce message is here:

  - Security fix for safe_eval, which further hardens the checking of
    the evaluation function.
  - Changing order of variable precendence for system facts, to ensure
    that inventory variables take precedence over any facts that may be
    set on a host.

- Change Makefile header, add Created by
- Change master sites, add icon
- Simplify REINPLACE
- Add Desktop entry file

PR:		ports/188209
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com>

Update to version 1.5.3, switch to fetching from github

PR:		ports/187453
Submitted by:	maintainer

sysutils/ansible: update to 1.5

- update to 1.5
- clarify how to use sysutils/ansible port to control non-FreeBSD systems
  in pkg-message
- remove man3 man pages: they are gone in the upstream distribution
- convert to PLIST_FILES
- remove NO_ARCH, while here - it has no practical value here
- add UPDATING entry, because some changes are not backward compatible

Changelog: https://raw.github.com/ansible/ansible/v1.5.0/CHANGELOG.md

PR:		187182
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- update to 1.4.5
- kill trailing newline in pkg-descr

Changelog: https://raw.github.com/ansible/ansible/v1.4.5/CHANGELOG.md

PR:		186724
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- Remove ansibleworks.com which is gone now

PR:		ports/186237
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

- Update checksum. Upstream changed manpage and copyright dates

PR:		ports/185611
Submitted by:	Nikolai Lifanov <lifanov@mail.lifanov.com> (maintainer)

BROKEN: Fails checksum

- add a mirror

PR:		185583
Submitted by:	maintainer, lifanov@mail.lifanov.com

12 vulnerabilities affecting 152 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-03-26 18:13:05