| non port: sysutils/mcron/Makefile |
|
SVNWeb
|
Number of commits found: 26 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] ea71236 (Only the first 10 of 972 ports in this commit are shown above. )
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 10 Jan 2022
|
[ 15:15 Stefan Eßer (se) ] bcaf25a (Only the first 10 of 491 ports in this commit are shown above. )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 8 Aug 2021
|
[ 17:05 Fernando Apesteguía (fernape) ] 2530c50
sysutils/mcron: Add license
port is GPL'ed.
|
[ 16:55 Fernando Apesteguía (fernape) ] 63d6aef
sysutils/mcron: update to 1.2.1
Reported by: portscout
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 14 Aug 2020
|
[ 11:01 danfe ]  
- Update to version 1.2.0
- Hook the tests to our framework
Found out via: www.opennet.ru
|
|
Mon, 4 Nov 2019
|
[ 21:21 rene ] (Only the first 10 of 99 ports in this commit are shown above. )
Returns johans's ports to the pool after safekeeping his commit bit.
|
|
Thu, 27 Jun 2019
|
[ 09:02 danfe ] (Only the first 10 of 33 ports in this commit are shown above. )
Update Guile to version 2.2.5, modern stable version, and fix dependent
ports to build against it. Most changes are rather minor and mechanical
except for the devel/gdb (obtained via their bugtracker [1], courtesy of
Doug Evans). One port (science/meep) I had to mark BROKEN after fixing
it proved to be very tedious and actually unreliable. It is very old,
there are newer versions available so it should be fixed by updating.
One port (devel/libruin) had revealed a bug in the new Guile code (an
auxiliary script, really) that had to be worked-round; reference to the
problematic upstream commit is provided in the patch.
PR: 229613
Exp-run by: antoine
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21104#c8
|
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 3 Sep 2014
|
[ 07:34 vanilla ]
Upgrade to 0.9.4. bump PORTREVISION due shared library incr.
PR: ports/193266
Submitted by: maintainer
|
|
Thu, 29 May 2014
|
[ 22:14 antoine ]
Unbreak
|
|
Tue, 27 May 2014
|
[ 19:41 johans ]
- Update mcron to 1.0.8
- Stagify
- Adopt port
|
|
Sat, 5 Apr 2014
|
[ 23:20 mat ]
Reset MAINTAINER.
<stefan@fh-mainz.de>: host srv-eml-pmva-02.fh-mainz.de[143.93.114.189] said:
550 5.1.1 <stefan@fh-mainz.de>: Recipient address rejected: undeliverable
address: host 143.93.114.70[143.93.114.70] said: 550 5.1.1
<stefan@fh-mainz.de>: Recipient address rejected: User unknown in virtual
mailbox table (in reply to RCPT TO command) (in reply to RCPT TO command)
Approved by: portmgr (implicit)
Obtained from: pkg-fallout
Sponsored by: Absolight
|
|
Fri, 20 Sep 2013
|
[ 23:06 bapt ] (Only the first 10 of 1053 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)
|
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
|
Sun, 31 Jul 2011
|
[ 15:07 jlaffaye ] (Only the first 10 of 41 ports in this commit are shown above. )
- Chase guile shared lib bump
- Add an entry to UPDATING
|
|
Thu, 22 Jan 2009
|
[ 16:04 miwi ] (Only the first 10 of 33 ports in this commit are shown above. )
- Chase lang/guile shlib bump
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 6 Jun 2008
|
[ 14:03 edwin ] (Only the first 10 of 198 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Fri, 7 Mar 2008
|
[ 13:09 jadawin ]
- Update to 1.0.4
PR: ports/121323
Submitted by: Stefan Pauly <stefan@fh-mainz.de> (maintainer)
Approved by: tabthorpe (co-mentor)
|
|
Sun, 11 Jun 2006
|
[ 21:24 mnag ]
- Update to 1.0.2
- Update WWW
- Take maintainership
- portlint(1)
PR: 97560
Submitted by: Stefan Pauly <stefan___fh-mainz.de>
|
|
Wed, 17 Mar 2004
|
[ 22:33 kris ]
Fix installation by avoiding GNU install longopts.
Submitted by: ache
|
[ 12:34 kris ]
BROKEN on 5.x: Does not install following ache's getopt changes
|
|
Wed, 17 Dec 2003
|
[ 02:32 ijliao ]
add mcron 1.0.0
A 100% compatible replacement for Vixie cron
|
Number of commits found: 26 |
As an Amazon Associate I earn from qualifying purchases.