sensors-applet A GNOME applet displaying hardware sensor values
1.6.1_11 sysutils =0

DEPRECATED: gnome-panel 2.x will be updated in the GNOME 3 import
This port expired on: 2014-04-10

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
Port Added: 03 May 2006 20:56:22
License: not specified in port

GNOME Sensors Applet is an applet for the GNOME Panel to display readings from
hardware sensors, including CPU temperature, fan speeds and voltage readings.

On FreeBSD, sensor values are obtained from the sysutils/mbmon (for
motherboards) and sysutils/smartmontools (for hard disks) ports.

WWW: http://sensors-applet.sourceforge.net/

SVNWeb : Homepage : PortsMon
There is no configure plist information for this port

---

No installation instructions: this port has been deleted.

The package name of this deleted port was: sensors-applet

PKGNAME: sensors-applet

distinfo: There is no distinfo for this port.

---

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. pkgconf : devel/pkgconf
2. gmake : devel/gmake
3. gnome-doc-utils.pc : textproc/gnome-doc-utils
4. gnome-menus<=2.39.0 : x11/gnome-menus
5. gnome-mime-data-2.0.pc : misc/gnome-mime-data
6. intltool-extract : textproc/intltool
7. pygobject-codegen-2.0 : devel/py-gobject
8. pygtk-2.0.pc : x11-toolkits/py-gtk2

Runtime dependencies:

1. mbmon : sysutils/xmbmon
2. smartctl : sysutils/smartmontools
3. gnome-doc-utils.pc : textproc/gnome-doc-utils
4. BSD.gnome.dist : misc/gnomehier
5. gnome-menus<=2.39.0 : x11/gnome-menus
6. gnome-mime-data-2.0.pc : misc/gnome-mime-data
7. pygobject-codegen-2.0 : devel/py-gobject
8. pygtk-2.0.pc : x11-toolkits/py-gtk2

Library dependencies:

1. libatk-1.0.so : accessibility/atk
2. libesd.so : audio/esound
3. libgconf-2.so : devel/gconf2
4. libglib-2.0.so : devel/glib20
5. libpcre.so : devel/pcre
6. libgnome-desktop-2.so : x11/gnome-desktop
7. libpanel-applet-3.so : x11/gnome-panel
8. libgnomevfs-2.so : devel/gnome-vfs
9. libgtk-x11-2.0.so : x11-toolkits/gtk20
10. libart_lgpl_2.so : graphics/libart_lgpl
11. libbonobo-2.so : devel/libbonobo
12. libbonoboui-2.so : x11-toolkits/libbonoboui
13. libglade-2.0.so : devel/libglade2
14. libgnome-2.so : x11/libgnome
15. libgnomecanvas-2.so : graphics/libgnomecanvas
16. libgnomeui-2.so : x11-toolkits/libgnomeui
17. libgsf-1.so : devel/libgsf
18. libIDL-2.so : devel/libIDL
19. librsvg-2.so : graphics/librsvg2
20. libwnck-1.so : x11-toolkits/libwnck
21. libxml2.so : textproc/libxml2
22. libxslt.so : textproc/libxslt
23. libORBit-2.so : devel/ORBit2
24. libpango-1.0.so : x11-toolkits/pango

There are no ports dependent upon this port

---

Configuration Options

     No options to configure

---

Master Sites:

1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
2. http://downloads.sourceforge.net/project/sensors-applet/sensors-applet/GNOME%20Sensors%20Applet%20Version%201.6.1/

• port deleted on 2014-04-11
  REASON: Has expired: gnome-panel 2.x will be updated in the GNOME 3 import
  

2014-04-10 deskutils/nautilus-locked-folder: nautilus will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 www/screem: gnome-menus 2.x will be updated in the GNOME 3 import
2014-04-10 deskutils/nautilus-actions: nautilus will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 deskutils/nautilus-sendto: nautilus will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 deskutils/nautilus-open-terminal: nautilus will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 sysutils/eiciel: nautilus will be updated to the 3.x version which is
not compatible with 2.x
2014-04-10 sysutils/nautilus-cd-burner: nautilus will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 x11-fm/py-nautilus: nautilus will be updated to the 3.x version which
is not compatible with 2.x
2014-04-10 sysutils/sensors-applet: gnome-panel 2.x will be updated in the GNOME
3 import
2014-04-10 net/link-monitor-applet: gnome-panel 2.x will be updated in the GNOME
3 import
2014-04-10 net/netspeed_applet: gnome-panel 2.x will be updated in the GNOME 3
import
2014-04-10 net/remmina-applet: gnome-panel 2.x will be updated in the GNOME 3
import
2014-04-10 misc/uf-view: gnome-desktop 2.x will be updated in the GNOME 3 import
2014-04-10 textproc/uim-gnome: gnome-panel 2.x will be updated in the GNOME 3
import
2014-04-10 audio/istream: gnome-panel will be updated to the 3.x version which
is not compatible with 2.x
2014-04-10 mail/contact-lookup-applet: gnome-panel will be updated to the 3.x
version which is not compatible with 2.x
2014-04-10 security/tuntun: gnome-panel 2.x will be updated in the GNOME 3
import
2014-04-10 misc/quick-lounge-applet: gnome-panel 2.x will be updated in the
GNOME 3 import
2014-04-10 sysutils/bubblemon2: gnome-panel 2.x will be updated in the GNOME 3
import

gnome-panel will be updated to the 3.x version when GNOME 3 will merged.
Deprecate the first batch of ports that are incompatible with the new 3.x
version.

Bump PORTREVISION for previous commit.

Change run dependency for mbmon from sysutils/mbmon to sysutils/xmbmon

The former port has expired.

Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)

Finish converting the whole ports tree to USES=pkgconfig

Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.

Add some explicit USE_PKGCONFIG=build

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.

- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Reset jylefort's port maintainerships.  portmgr has taken his commit bit
into safekeeping due to inactivity.

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix packing list.

Reported by:    pointyhat via kris

- Add hard disk temperature support (uses sysutils/smartmontools).
- Fix some icons.
- Style.

Add sensors-applet.

GNOME Sensors Applet is an applet for the GNOME Panel to display readings from
hardware sensors, including CPU temperature, fan speeds and voltage readings.

On FreeBSD, sensor values are obtained from the sysutils/mbmon port.

WWW: http://sensors-applet.sourceforge.net/

13 vulnerabilities affecting 158 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-12-12 10:25:27