Modlogan is for all those who want a log-analyzer that is easy
to extend and very flexible. Just write a new output plugin and
create your very special report-design. You don't have to
reinvent the whole wheel to change the colour of the tire.
Imagine a SQL-output-plugin that writes the calculated data
into your database. Or a Memo generator that posts the
monthly stats to your department mailing list for further
investigation.
===> The following configuration options are available for modlogan-0.8.13_20:
DOCS=on: Build and/or install documentation
MYSQL=off: MySQL database support
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Various spelling corrections
PR: ports/175331
Submitted by: Christoph Mallon
Approved by: No objections within three weeks from any maintainer
While here, style and duplicate phrase fixes in bsdcflow pkg-descr
Submitted by: mi
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Drop sourceforge mirrors from MASTER_SITES as they don't cary the last
versions of this port. [1]
- Remove USE_REINPLACE.
- Use DOCSDIR and EXAMPLESDIR in plist.
PR: 96601
Submitted by: Ion-Mihai "IOnut" Tetcu <itetcu@people.tecnik93.com>
Reported by: fenner's distfiles survey [1]
Fix the adns library version so it matches the internal soname. This sets
the lib version back to 1, but since the dependencies still linked to
libadns.so.1 even when the installed file was libadns.so.12, a new
PORTREVISION bump is not needed.
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- fix plist
- update to 0.8.13, changes to previous version:
* fixed handling of negative timezones in input-clf if format is
specified
* fixed segfaults in output-modlogan
* removed debug-output
Approved by: portmgr
Update to 0.8.11.
New stuff
- full reports in the template output plugin
(generate_full_reports = 1)
- a new report for proxy servers: requesting hosts by traffic
- the modlogan logo is part of all output
Fix
- empty virtual hosts aren't dropped from statefile anymore
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Update to 0.8.10:
- improved memory-usage and performance of the template engine
- fixed detection of bind_textdomain_codeset() of FreeBSD
- fixed 2 segfaults
- a plugin for mod_log_sql has been included
- the ippl plugin got support for ipmod
o Main modification
graphics/gd(based on 1.8.4) -> graphics/gd1
graphics/gd2(based on 2.0.15) -> graphics/gd
graphics/p5-GD(based on 1.41) -> graphics/p5-GD1
graphics/p5-GD2(based on 2.07) -> graphics/p5-GD
japanese/gd -> japanese/gd1
japanese/gd2 -> japanese/gd
o Include some feature
WITH_XPM(w/, w/o WITHOUT_X11)
o Chase this modification
o Fix build error [1]
PR: ports/54540
Submitted by: Ports Fury
Approved by: maintainer (blanket)
Reported by: bento via kris [1]
o Change library name from libgd to libgd1.
o Do not install everything except headers and libraries
(to avoid conflicting with graphics/gd2)
o Fix dependency on new libgd1(for many ports).
PR: ports/54100
Submitted by: Ports Fury
Update to 0.8.7.
Changes:
- all plugins support gzip and bzip2 compressed inputfile now
- removed: input_flow, input_elmeg, input_hicom116, utput_sybase_guj,
output_tkcontrol
- use less memory
- faster
- some fixes
Update to 0.8.4.
Changes:
- gzip and bzip2 support for the log files
- reduced memory usage (a lot, more than 20%, depending on the log files)
- faster
- support for setting config options on the command-line
- some fixes for seg-faults
- relaxed max line-length in the log files from 1k to 4k
Update to 0.8.2.
New:
- rsync parser
- a 'localizer'
Fixes:
- segfault using the realserver parser
- segfault when the state-file-dir has wrong permissions
PERL5 is only needed for the regression tests, but configure fails when no
perl is available. As a work around use USE_PERL5_BUILD until the next
update of modlogan (it is already fixed in modlogan-CVS) to make the port
build for the release happy.
Approved by: kris
Update to 0.8.1.
WARNING: this version
- has a different config file syntax
- rewrites your state files to have a new structure, you can't go back
to 0.7.x after a run of 0.8.1
Changes:
- faster
- uses less memory
- ... (see changelog)
gettext upgrade uber-patch (stage 3)
- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
with a "-old" suffix -- gettext-old will have its deorbit burn
sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order
Reviewed by: portmgr
- use my @FreeBSD.org address
- catchup with the "${MACHINE_ARCH}--freebsd${OSREL}" ->
"${MACHINE_ARCH}-portbld-freebsd${OSREL}" change in bsd.port.mk
Noticed and tested by: Dennis Kjær Jensen <signout@signout.dk>
- remove LC_MESSAGES handling from plist, gettext handles it already
Suggested by: sobomax
Approved by: joerg
