Port details |
- rubygem-simplecov-html Default HTML formatter for SimpleCov
- 0.12.3 textproc =0 0.12.3Version of this port present on the latest quarterly branch.
- Maintainer: ruby@FreeBSD.org
- Port Added: 2013-10-24 19:52:53
- Last Update: 2023-01-14 23:08:33
- Commit Hash: 18c6e18
- Also Listed In: rubygems
- License: MIT
- WWW:
- https://github.com/simplecov-ruby/simplecov-html
- Description:
- Default HTML formatter for SimpleCov code coverage tool for ruby 1.9+
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- rubygem-simplecov-html>0:textproc/rubygem-simplecov-html
- To install the port:
- cd /usr/ports/textproc/rubygem-simplecov-html/ && make install clean
- To add the package, run one of these commands:
- pkg install textproc/rubygem-simplecov-html
- pkg install rubygem-simplecov-html
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: rubygem-simplecov-html
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1626714714
SHA256 (rubygem/simplecov-html-0.12.3.gem) = 4b1aad33259ffba8b29c6876c12db70e5750cb9df829486e4c6e5da4fa0aa07b
SIZE (rubygem/simplecov-html-0.12.3.gem) = 336896
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
- Runtime dependencies:
-
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
- Patch dependencies:
-
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
-
- This port is required by:
- for Run
-
- devel/rubygem-simplecov
Configuration Options:
- No options to configure
- Options name:
- textproc_rubygem-simplecov-html
- USES:
- gem
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.12.3 14 Jan 2023 23:08:33 |
Muhammad Moinur Rahman (bofh) |
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925 |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.12.3 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.12.3 21 Jul 2021 18:12:05 |
Po-Chuan Hsieh (sunpoet) |
textproc/rubygem-simplecov-html: Update to 0.12.3
Changes: https://github.com/simplecov-ruby/simplecov-html/releases |
0.12.2 07 Apr 2021 08:09:01 |
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
0.12.2 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.12.2 23 Aug 2020 19:48:28 |
sunpoet |
Update to 0.12.2
- Update WWW
Changes: https://github.com/simplecov-ruby/simplecov-html/releases |
0.10.2 15 Aug 2017 18:58:55 |
sunpoet |
Update to 0.10.2
- Add LICENSE_FILE
Changes: https://github.com/colszowka/simplecov-html/blob/master/CHANGELOG.md |
0.10.1 18 May 2017 16:05:03 |
sunpoet |
Update to 0.10.1
Changes: https://github.com/colszowka/simplecov-html/blob/master/CHANGELOG.md |
0.10.0 27 Apr 2016 21:57:32 |
swills |
Convert USES=gem:autoplist to USES=gem since autoplist is default |
0.10.0 27 Apr 2016 16:36:42 |
swills |
create USES=gem and update rubygem- ports to use it
Note that for now ports still have to have USE_RUBY=yes to use USES=gem
PR: 209041
Differential Revision: https://reviews.freebsd.org/D6070 |
0.10.0 06 Jun 2015 18:09:22 |
sunpoet |
- Update to 0.10.0
- Add NO_ARCH
Changes: https://github.com/colszowka/simplecov-html/commits/master |
0.8.0_1 28 Aug 2014 16:25:08 |
sunpoet |
- Add LICENSE
- Fix COMMENT |
0.8.0_1 29 Nov 2013 23:00:20 |
sunpoet |
- Fix RUN_DEPENDS
- Bump PORTREVISION for dependency change |
0.8.0 12 Nov 2013 19:45:03 |
sunpoet |
- Update to 0.8.0
- Remove contiguous blank line
Changes: https://github.com/colszowka/simplecov-html/commits/master |
0.7.1 30 Oct 2013 02:59:10 |
swills |
- Add stage support |
0.7.1 24 Oct 2013 19:52:42 |
swills |
Default HTML formatter for SimpleCov code coverage tool for ruby 1.9+
WWW: https://github.com/colszowka/simplecov-html
PR: ports/182756
Submitted by: Loic Blot <loic.blot@unix-experience.fr> |