| Port details |
- p5-HTTP-MHTTP Low level access to the HTTP protocol
- 0.15_1 www
 =2      0.15_1Version of this port present on the latest quarterly branch. - Maintainer: perl@FreeBSD.org
- Port Added: 2004-01-24 18:26:07
- Last Update: 2023-05-17 16:30:15
- Commit Hash: 9b178ff
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: perl5
- License: ART10 GPLv1+
- WWW:
- https://metacpan.org/release/HTTP-MHTTP
- Description:
- HTTP::MHTTP - this library provides reasonably low level access to the
HTTP protocol, for perl. This does not replace LWP (what possibly could
:-) but is a cut for speed. It also supports all of HTTP 1.0, so you
have GET, POST, PUT, HEAD, and DELETE. Some support of HTTP 1.1 is
available - specifically Transfer-Encoding = chunked and the Keep-Alive
extensions.
Additionally - rudimentary SSL support compiled in. This effectively
enables negotiation of TLS, but does not validate the certificates.
A way faster http access library that uses C extension based on mhttp to
do the calls.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-HTTP-MHTTP>0:www/p5-HTTP-MHTTP
- To install the port:
- cd /usr/ports/www/p5-HTTP-MHTTP/ && make install clean
- To add the package, run one of these commands:
- pkg install www/p5-HTTP-MHTTP
- pkg install p5-HTTP-MHTTP
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-HTTP-MHTTP
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (HTTP-MHTTP-0.15.tar.gz) = a7680a752ab873564df240054e1e7396b2e9234b5113c8145e2b01ce6628a23a
SIZE (HTTP-MHTTP-0.15.tar.gz) = 16057
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- perl5>=5.32.r0<5.33 : lang/perl5.32
- Runtime dependencies:
-
- perl5>=5.32.r0<5.33 : lang/perl5.32
-
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- www_p5-HTTP-MHTTP
- USES:
- perl5 ssl
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.15_1
17 May 2023 16:30:15
 |
Muhammad Moinur Rahman (bofh) |
*/*: llvm15 build fixes
llvm15 was also merged into 13.2-STABLE effective from OSVERSION
1302505. Fix the ports that failed to build with llvm15.
Approved by: portmgr (blanket) |
0.15_1
02 May 2023 16:32:23
|
Muhammad Moinur Rahman (bofh) |
www/p5-HTTP-MHTTP: Unbreak on HEAD
- Add LICENSE ART10 GPLv1+
- Pet portclippy |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.15_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.15_1
20 Jul 2022 14:23:26
|
Tobias C. Berner (tcberner) |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
0.15_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.15_1
27 May 2018 20:15:20
 |
sunpoet |
Update WWW
search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.
With hat: perl |
0.15_1
15 Mar 2017 14:45:31
|
mat |
Remove all USE_OPENSSL occurrences.
Sponsored by: Absolight |
0.15_1
02 Feb 2015 16:42:13
|
marino |
www/p5-HTTP-MHTTP: This is not jobs safe
I've run into a handful of perl ports that are not jobs safe. I've been
hesitating to mark them as such, but this port has shown up multiple
times on the fail-to-build list. There are other perl ports that also fail
quite often with high "j" numbers, so I'll start marking them.
This one fails to build the libmhttp.a archive which is a typical error
seen when at least one of the object files is missing. |
0.15_1
26 Nov 2014 13:08:38
|
mat |
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above ) |
0.15
10 Jun 2014 12:14:14
|
mat |
Remove all the bootstrap files (.bs) from the plists.
Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.
PR: 190681
Submitted by: mat
Exp-Run by: antoine
Sponsored by: Absolight |
0.15
07 Nov 2013 13:55:25
|
vanilla |
support STAGEDIR. |
0.15
20 Sep 2013 23:36:54
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
www) |
0.15
31 Jul 2013 06:54:10
|
az |
- Convert to new Uses/perl5.mk framework
- Resolve issues with implicit lang/perl in extract and patch dependencies
- Trim Makefile header
Reviewed by: bapt@ (exp-run)
Approved by: bapt@ (portmrg@) |
0.15
07 May 2012 15:42:51
|
skv |
Pass maintainership of almost of my "p5-*" ports to "perl@".
(I hope updating of them will be improved). |
0.15
24 Oct 2011 09:11:38
|
dougb |
The vast majority of pkg-descr files had the following format when they
had both lines:
Author: ...
WWW: ....
So standardize on that, and move them to the end of the file when necessary.
Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.
s/AUTHOR/Author/
A few other various formatting issues |
0.15
19 Mar 2011 12:38:54
|
miwi |
- Get Rid MD5 support |
0.15
17 Apr 2008 14:30:31
|
araujo |
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav) |
0.15
24 Jan 2006 03:14:23
|
edwin |
SHA256ify
Approved by: krion@ |
0.15
22 Jan 2006 02:58:25
|
edwin |
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry
Approved by: krion@
PR: ports/88711 (related) |
0.15
31 Mar 2004 03:12:58
|
trevor |
SIZEify (maintainer timeout) |
0.15
24 Jan 2004 18:24:03
|
skv |
Add p5-HTTP-MHTTP 0.15, low level access to the HTTP protocol. |
As an Amazon Associate I earn from qualifying purchases.