| Port details |
- py-turbogears2 Python-Based Framework for Rapid Web Development
- 2.3.12_1 www
 =2      2.3.12_1Version of this port present on the latest quarterly branch. - Maintainer: wen@FreeBSD.org
- Port Added: 2009-08-18 22:20:26
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: MIT
- WWW:
- https://www.turbogears.org/
- Description:
- TurboGears 2 is a reinvention of the TurboGears project to take
advantage of new components, and to provide a fully customizable
WSGI (Web Server Gateway Interface) stack. From the beginning
TurboGears was designed to be a Full Stack framework built from
best-of-breed components. New components have been released which
improved on the ones in the original TGstack, and the Python web
world has been increasingly designed around WSGI.
This has enabled a whole new world of reuse, and TG2 is designed
to take advantage of this fact in order to make a framework which
provides easy to use, productive defaults, while still providing
flexibility where it is useful.
TG2 represents a change from some of the components in TurboGears 1,
but we have now invested in a set of components that we think will
continue to be at the center of python web development for years to
come.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}TurboGears2>0:www/py-turbogears2@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/www/py-turbogears2/ && make install clean
- To add the package, run one of these commands:
- pkg install www/py-turbogears2
- pkg install py39-TurboGears2
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-TurboGears2 listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-TurboGears2
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1523707368
SHA256 (TurboGears2-2.3.12.tar.gz) = e1274e6993e755094751d4d3ef5f2c4ee8615f01a25d24068759d479c4752063
SIZE (TurboGears2-2.3.12.tar.gz) = 178274
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-crank>=0 : devel/py-crank@py39
- py39-webob>=1.2 : www/py-webob@py39
- py39-markupsafe>=0 : textproc/py-markupsafe@py39
- py39-repoze.lru>=0 : devel/py-repoze.lru@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- www_py-turbogears2
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.3.12_1
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.3.12_1
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.3.12_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.3.12_1
20 Jul 2022 14:23:26
|
Tobias C. Berner (tcberner) |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
2.3.12_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.3.12_1
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.3.12_1
05 Dec 2020 14:22:47
|
sunpoet |
Move textproc/py-MarkupSafe to textproc/py-markupsafe
- Bump PORTREVISION for dependency change |
2.3.12
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
2.3.12
14 Apr 2018 08:27:53
|
wen |
- Update to 2.3.12 |
2.3.11
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
2.3.11
03 Sep 2017 08:46:31
|
wen |
- Update to 2.3.11 |
2.3.10
12 Dec 2016 23:44:00
|
wen |
- Update to 2.3.10
- Add LICENSE
- Update DEPENDS
- Change MASTER_SITES to CHEESESHOP |
2.1.5
28 Oct 2016 17:14:22
|
jbeich |
www/py-turbogears2: track PORTEPOCH in dependencies
- repoze.who-testutil>=1.0.8 doesn't exist in ports, setup.py
actually refers to 1.0.1 |
2.1.5
22 May 2016 10:52:45
|
matthew |
Reorganise and modernise the py-sqlalchemy ports.
- Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
- Deprecate the ports for the 0.6 and 0.7 release branches, as these
have been declared EoL and are no longer supported by upstream.
- Update to the latest available version in each branch.
In detail:
Port Version Maintainer
----------------------------------------------
py-sqlalchemy06 0.6.9 nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
py-sqlalchemy07 0.7.10 nivit@FreeBSD.org (renamed py-sqlalchemy,
Deprecate 2016-08-20) [1]
py-sqlalchemy08 0.8.7 nivit@FreeBSD.org (renamed py-sqlalchemy-devel)
[1]
py-sqlalchemy09 0.9.10 m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2] (Only the first 15 lines of the commit message are shown above ) |
2.1.5
01 Apr 2016 14:33:58
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight |
2.1.5
03 Jan 2015 08:41:21
|
mva |
- Convert USE_PYTHON to new USES in www/
With hat: python@ |
2.1.5
25 Jun 2014 22:31:44
|
wen |
- Update to 2.1.5 |
2.1.4
13 May 2014 12:09:49
|
wen |
- Stage support [1]
- Convert to PYDISTUTILS_AUTOPLIST [1]
- Pet portlint [1]
- Update my email to FreeBSD
PR: 188776 [1]
Submitted by: Bartek Rutkowski <ports@robakdesign.com> [1] |
2.1.4
20 Sep 2013 23:36:54
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
www) |
2.1.4
09 Feb 2012 00:21:56
|
wen |
- Update to 2.1.4
PR: ports/164760
Submitted by: ychsiao <ychsiao@ychsiao.org> |
2.0.3
19 Mar 2011 12:38:54
|
miwi |
- Get Rid MD5 support |
2.0.3
12 Dec 2009 13:16:01
|
wen |
- Update to 2.0.3 |
2.0.1
18 Aug 2009 22:38:57
|
miwi |
- Update to 2.0.1
PR: 137603
Submitted by: Wen Heping <wenheping@gmail.com> (maintainer) |
1.0.8_1
18 Aug 2009 22:20:05
|
miwi |
- Force commit to note a repocopy:
www/py-turbogears -> www/py-turbogears2 |
As an Amazon Associate I earn from qualifying purchases.