SOGo is a fully supported and trusted groupware server with a focus on
scalability and open standards. It provides a rich AJAX-based Web
interface and supports multiple native clients through the use of
standard protocols such as CalDAV, CardDAV and GroupDAV.
WWW: http://sogo.nu/
SOGo 3 was installed
In order to run the sogo daemon (sogod), you will need to create and configure
the main configuration file, e.g.:
cp -p %%LOCALBASE%%/etc/sogo/sogo.conf.sample ${LOCALBASE}/etc/sogo/sogo.conf
And to allow the service to run at system startup, add sogod_enable="YES"
in your rc.conf.
If you need to allow email alarms (notifications) for calendar events, copy
the sample credentials file:
cp -p %%LOCALBASE%%/etc/sogo/ealarms-notify.creds.sample \
%%LOCALBASE%%/etc/sogo/ealarms-notify.creds
Then replace the username:password with appropriate credentials for SMTP AUTH
sending capabilities.
Then copy the sample cron executable:
cp -p %%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-ealarms-notify.sample \
%%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-ealarms-notify
And edit this file to suit your server timezone (e.g. TZ=Africa/Algiers).
Then add the following lines to the root users' crontab (crontab -e):
# Process email reminders every minute
* * * * * %%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-ealarms-notify
If you need to automatically purge vacation messages from users sieve scripts,
copy the sample credentials file:
cp -p ${LOCALBASE}/etc/sogo/expire-autoreply.creds.sample \
%%LOCALBASE%%/etc/sogo/expire-autoreply.creds
Then replace the username:password with appropriate credentials for your
IMAP servers' sieve account.
Then copy the sample cron executable:
cp -p %%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-expire-autoreply.sample \
%%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-expire-autoreply
And edit this file to suit your server timezone (e.g. TZ=Africa/Algiers).
Then add the following lines to the root users' crontab (crontab -e):
# Vacation messages expiration
# The credentials file should contain the sieve admin credentials (username:passwd)
0 0 * * * %%LOCALBASE%%/GNUstep/Local/Tools/Admin/cron-expire-autoreply
For more information about using SOGo, visit:
http://www.sogo.nu/downloads/documentation.html
Remove expired ports:
2020-01-31 www/py-dj21-django-auth-ldap: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/py-dj21-django-crispy-forms: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/sogo3-activesync: Deprecated, replaced by www/sogo4
2020-01-31 devel/sope3: Deprecated, replaced by devel/sope4
2020-01-31 www/py-dj21-django-mptt: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 graphics/py-willow11: Use graphics/py-willow instead
2020-01-31 www/py-dj21-django-tables2: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/py-dj21-django-debug-toolbar: Django 2.1 is now End-of-Life
(Since December 2 2019) and no longer supported. Switch to Django 2.2+ versions
of this port as soon as possible
2020-01-31 security/krb5-115: EOL one year after the release of krb5 1.17
2020-01-31 www/py-dj21-django-taggit: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/py-dj21-django-cors-headers: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 graphics/py-imgurpython: No longer supported by upstream
2020-01-31 www/py-dj21-django-taggit-serializer: Django 2.1 is now End-of-Life
(Since December 2 2019) and no longer supported. Switch to Django 2.2+ versions
of this port as soon as possible
2020-01-31 www/py-dj21-django-filter: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/py-dj21-django-timezone-field: Django 2.1 is now End-of-Life
(Since December 2 2019) and no longer supported. Switch to Django 2.2+ versions
of this port as soon as possible
2020-01-31 devel/py-xarray011: Use devel/py-xarray instead
2020-01-31 www/py-django-modelcluster4: Use www/py-django-modelcluster instead
2020-01-31 devel/py-semantic_version26: Use devel/py-semantic_version instead
2020-01-31 www/py-dj21-django-js-asset: Django 2.1 is now End-of-Life (Since
December 2 2019) and no longer supported. Switch to Django 2.2+ versions of this
port as soon as possible
2020-01-31 www/py-dj21-drf-yasg: Django 2.1 is now End-of-Life (Since December 2
2019) and no longer supported. Switch to Django 2.2+ versions of this port as
soon as possible
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Move Objective-C ports to the v2 GNUstep ABI.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
