05:55 tabthorpe 

- Strip header at request of original creator

Submitted by:	trevor
With hat:	portmgr

 

20:24 netchild 

Set the expiration date for all ports which depend upon linux_base-fc4 to
the EoL of the last 7.x release. The 7.x branch is the only supported
FreeBSD version not yet at his EoL which needs a linux 2.4 based linuxulator
environment (linux_base-f10 doesn't work there).

I didn't bump the portrevision, this is mostly done as a hint for ports
committers to tell them that at least the emulation@-owned ports need
to stay until then (even the forbidden ones). The dependent ports need to
go at the same time, but are free to be deleted before.

Discussed with: bsam

15:08 ehaupt 

Unify maintainer address for emulation ports.
(freebsd-emulation@FreeBSD.org -> emulation@FreeBSD.org)

Discussed with: netchild (emulation)

09:26 ehaupt 

Add a more reliable mirrors for fc4 and f10 linux emulation ports.

Triggered by:   distilator
Reviewed by:    netchild (emulation)

21:15 bsam 

. add linux-f10 ports to the rank of CONFLICTS for linux-fc4 ports;
. bump PORTREVISIONs.

10:10 bsam 

Finish repocopies of new linux-f8 infrastructure ports:
. add CONFLICTS to 47 original ports;
. bump PORTREVISIONs for all of them;
. pet portlint for 2-3 ports (misplaced PORTREVISION).

17:28 bsam 

Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.

The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.

The idea was taken from bsd.gnome.mk and others.

More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.

Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.

Other changes are coming. Stay tuned!

PR:             ports/132510
Submitted by:   bsam (me)
Exp-run by:     portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

14:54 bsam 

. change the prefix (/usr/X11 -> %{LOCALBASE}) at the configuration file;  [1]
. do REINPLACE at post-patch instead of post-install;                      [2]
. don't let the linux fc-cache mess up the native cache file (delete       [3]
  the binary and the man);
. add some comments to the Makefile.

PR:             110632  [1]
Submitted by:   Karol Kwiatkowski <karol.kwiat at gmail.com>  [1]
Suggested by:   pav  [2], netchild  [3]
Approved by:    portmgr (pav)

05:14 marcus 

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

21:01 bsam 

1. Upgrade linux infrostructure ports from FC3 to FC4.
2. Introduce gtk2-engines into x11-toolkits/linux-gtk2.     [1]

Requested by:   netchild [1]
Approved by:    netchild (mentor, implicit)

15:48 netchild 

Don't run fc-cache, we're using the fonts of the X server and the native
fontconfig (or the fonts ports/packages) are supposed to run fc-cache.
I also noticed it has problems with some fonts, so we may end up with a
not complete cache in this version.

This should fix the build on pointyhat (cache files left after pkg_delete).

While I'm here use a link to the native fonts.conf, we don't need our
own here.

05:00 edwin 

Remove USE_REINPLACE from categories starting with X

17:28 netchild 

- convert to use bsd.linux-rpm.mk (get rid of include of linux-gtk/Makefile) [1]
- use fixed plists [1]
- category "linux" added to those ports without it [1]
- update some ports to a recent FC3 one [1]

- remove plists/... for Alpha (there's no support since linux_base-8 for
  Alpha anymore)
- don't hardcode version numbers in some plists, use PLIST_SUB instead
  (any errors are mine, don't keep them, send them to me)

Regarding linux-ungif I declare a maintainer timeout (one month, Boris tried
to contact the maintainer) and also pull the "sweeping commit"-card (the
port which it uses as some kind of master port can not be used for this
anymore). Besides this, I don't think he will be upset when other people
do the work instead of adding an entry to his TODO list. :-)

This commit brings us just before the switch of the default linux base
port to the fc3 one, modulo some bugs which may appear. So:
         Beta testers wanted!

To test:
sed -i.old -e 's:linux-XFree86-libs:linux-xorg-libs:' /usr/ports/Mk/bsd.port.mk
echo OVERRIDE_LINUX_BASE_PORT=fc3 >> /etc/make.conf
portupgrade -f -o emulators/linux_base-fc3 -f linux_base-8
portupgrade -o x11/linux-xorg-libs linux-XFree86-libs
portupgrade linux-\*

The first two steps are necessary to switch to fc3 as the new default linux
base port, the last 3 steps to upgrade to fc3.

And feel free to send a big "Thank you!" to Boris, he did a lot of the work!
I just provided some hints and answered some questions (besides from
committing all the necessary changes for FC3 and doing some minor
changes+comments/improvements to/of his work), even when he tries to tell
you something else. ;-)

Submitted by:   Boris Samorodov <bsam@ipt.ru> [1]

20:49 netchild 

 - fix the package (tried to use a nonexistent plist) [1]
 - use MASTER_SITE_FEDORA (pet portlint a little bit)
 - while I'm here: SHA256 (no MD5 change, Kris: no need to check :) )

This should also fix the package build of the linux XFree86 bits.

Pointyhat to:   netchild [1]

19:59 netchild 

Fix package (missing empty directory) by introducing a static plist.

PR:             88752
Submitted by:   Boris Samorodov <bsam@ipt.ru>

10:56 netchild 

Update to 2.2.3.

Submitted by:   mi

13:20 marius 

Fix a dependency bug that crept in with rev. 1.7, even when using the
currently commented out pkg-install script linux-expat is only a
RUN_DEPENDS rather than a BUILD_DEPENDS so declare it as such instead
of a BUILD_DEPENDS and setting RUN_DEPENDS=${BUILD_DEPENDS}. The latter
caused archivers/rpm and devel/popt to be unnecessarily dragged in as
RUN_DEPENDS (via the included x11-toolkits/linux-gtk/Makefile).

Approved by:    netchild

22:59 netchild 

Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
    ${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
  - If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
    port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
    be marked as IGNORE. [1]
  - Readd USE_LINUX knobs into several ports and make several uses of a
    conditional dependency ("USE_LINUX?=") into an unconditional one
    ("USE_LINUX=") which where removed/changed by Trevor to allow the use of
    alternative linux_base ports. While this is a nice goal, the implementation
    resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
    in this commit is supposed to fix the problem while keeping the feature.
    Basicaly this includes a backout of Trevor's commit, to prevent confusion
    I mention it here explicitely.
  - Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
    Chase dependencies for this.
  - Changes to make linux_devtools installable on amd64, remove some stray
    device nodes (they don't work on recent OS versions and aren't really
    needed).
  - Make linux_base-8 PREFIX clean and remove some stray device nodes.
    Additionally tell a little bit more about how to setup NIS/YP [2].
  - Update the PGSQL dependency in the linux-opengroupware port to a recent
    version (the old one isn't available anymore), I don't know if this
    works (at least it isn't more broken than before).
  - Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
    ports, the former path exists already and gets populated by other
    packages too (PREFIX=LINUXPREFIX!).
  - Fix some obvious (non-linuxolator) bugs in some linux ports while being
    there.
  - Bump PORTREVISION where neccesary.

Requested by:   portmgr (linimon) [1]
Submittted by:  Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by:    portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on:      ports cluster (kris)
Reviewed by:    silence on emulation@
Superseedes PR: 69997

Maintainer approval from:
        chris@chrisburkert.de
        cracauer@cons.org
        des
        girgen
        jamie@bishopston.net
        mezz
        mi
        nivit@users.sf.net
        pat
        simond@irrelevant.org
        riggs@rrr.de
        Udo.Schweigert@Siemens.com

00:41 obrien 

Enable on amd64.

PR:             75852 (partial)
Submitted by:   Francois Tigeot <ftigeot@wolfpond.org>

18:24 netchild 

Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some
   warnings in some cases [2]
 - fix a cut&past error in the linux_base-8 pkg-install script [3]
 - convert the binary knob "USE_LINUX" to a version specifier, e.g.
   USE_LINUX=<value> specifies a dependency upon
   emulators/linux_base-<value>, exceptions are a value of "7" (which
   does what you want and adds a dependency to linux_base) and any
   value without a corresponding port in
   PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
   the default linux_base)
 - don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
   this allows us to use the USE_LINUX_PREFIX knob for linux_base and
   paves the way for splitting up future linux base ports into
   individual pieces
 - remove RESTRICTED from some GPL licensed ports, even when we only
   distribute binaries, we get them from official linux sites, so
   anyone can grab them there if he needs to
 - add a dependency upon the linux X11 bits where necessary (based upon
   guesswork)
 - don't use USE_X_PREFIX in some linux ports since it adds a dependency
   to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
   solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
 - bump the portrevision of the linux ports ("better safe than sorry"
   algorithm)
 - pass maintainership of the important linux infrastructure to a
   mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
   doesn't like this: tell us your bikeshed color at freebsd-emulation@,
   my color would be "linuxolator@" in case someone cares...)
 - add a pkg-install script for linux-fontconfig, but don't use it;
   everything should work without it (the FreeBSD fc-cache program should
   do all the work), but in case we need it we just need to decomment the
   pkg-install part in the Makefile
 - fix some dependencies
 - fix some bugs
 - add some static plists
 - unbreak the ports with dependecies to more than one linux_base

This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.

Known bugs:
 - the linux-mesa and linux-devtools ports install libGL*.so symlinks
 - some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
   the linux X11 port, so linx_Base-8 moans at deinstall time)

Future work (interested souls should coordinate with freebsd-emulation@):
 - add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
   or modify the behavior of USE_XLIB in the USE_LINUX case
   AFAIK trevor has some patches.
 - make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
   the PREFIX?= workaround in some linux ports
   Should be discussed/coordinated on/with x11@.
 - move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
 - update to a more recent linux base

PR:                     69997, 70539 (and maybe others)
Discussed with/on:      java@, x11@, trevor, portmgr
Tested by:              mezz, portmgr, pointyhat
RPM hunted down by:     Joseph Gelinas <scirocco@tasam.com> [1]
Requested by:           portmgr [2]
Submitted by:           kris [3]
Approved by:            portmgr

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

16:57 trevor 

patch from
<URL:http://people.freebsd.org/~trevor/ports/freeze-5.2/linux-misc-depends.diff>
to fix dependencies:  these ports need ports/archivers/rpm for their
do-install, so they can can use the rpm2cpio that accompanies it

Reviewed by:    silence (two months) from portmgr and freebsd-ports-bugs

13:43 netchild 

s/rpm2cpio/rpm2cpio.pl/ after the recent update of archivers/rpm2cpio (the
script was renamed to solve a conflict with archivers/rpm) to fix possible
build problems.

I've tested this with lang/icc. Any new errors because of this commit in
one of the modified ports may be because the ports previously may have used
rpm2cpio from archivers/rpm instead of the used {EXTRACT,BUILD}_DEPENDS
archivers/rpm2cpio.

03:58 trevor 

Fix packing list.

14:37 trevor 

Decrease PORTREVISION from 2 to 0.  I hope no one has installed
these yet.

13:56 trevor 

new Linux/i386 binary port of Fontconfig