| Port details on branch 2020Q3 |
- xorg-dmx Distributed Multihead X from X.Org
- 1.20.8_4,1 x11-servers
 =0      Package not present on quarterly.This is expected early in the quarter (because the new packaage repo has not been built yet.). Otherwise, this missing version is most likely a FreshPorts error. - Maintainer: x11@FreeBSD.org
- Port Added: 2020-08-01 14:24:23
- Last Update: unknown
- License: MIT
- WWW:
- https://www.x.org/
- Description:
- Xdmx is proxy X server that provides multi-head support for multiple displays
attached to different machines (each of which is running a typical X server).
When Xinerama is used with Xdmx, the multiple displays on multiple machines
are presented to the user as a single unified screen.
WWW: https://www.x.org/
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - USE_RC_SUBR (Service Scripts)
- no SUBR information found for this port
- Dependency lines:
-
- xorg-dmx>0:x11-servers/xorg-dmx
- To install the port:
- cd /usr/ports/x11-servers/xorg-dmx/ && make install clean
- To add the package, run one of these commands:
- pkg install x11-servers/xorg-dmx
- pkg install xorg-dmx
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: xorg-dmx
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1598375490
SHA256 (xorg/xserver/xorg-server-1.20.8.tar.bz2) = d17b646bee4ba0fb7850c1cc55b18e3e8513ed5c02bdf38da7e107f84e2d0146
SIZE (xorg/xserver/xorg-server-1.20.8.tar.bz2) = 6309640
No package information for this port in our database- Sometimes this happens. Not all ports have packages. Perhaps there is a build error. Check the fallout link:
- Master port: x11-servers/xorg-server
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- libepoxy>0 : graphics/libepoxy
- gmake>=4.3 : devel/gmake
- pkgconf>=1.3.0_1 : devel/pkgconf
- xorgproto>=0 : x11/xorgproto
- xorgproto>=0 : x11/xorgproto
- xtrans.pc : x11/xtrans
- xorgproto>=0 : x11/xorgproto
- xorg-macros.pc : devel/xorg-macros
- fontutil.pc : x11-fonts/font-util
- dri.pc : graphics/mesa-dri
- dmx.pc : x11/libdmx
- x11.pc : x11/libX11
- xaw7.pc : x11-toolkits/libXaw
- xext.pc : x11/libXext
- xfixes.pc : x11/libXfixes
- xi.pc : x11/libXi
- xmu.pc : x11-toolkits/libXmu
- xpm.pc : x11/libXpm
- xrender.pc : x11/libXrender
- xres.pc : x11/libXres
- xt.pc : x11-toolkits/libXt
- xtst.pc : x11/libXtst
- pixman-1.pc : x11/pixman
- xau.pc : x11/libXau
- xdmcp.pc : x11/libXdmcp
- xfont2.pc : x11-fonts/libXfont2
- xkbfile.pc : x11/libxkbfile
- xshmfence.pc : x11/libxshmfence
- perl5>=5.30.r1<5.31 : lang/perl5.30
- Runtime dependencies:
-
- xkeyboard-config>=2.5 : x11/xkeyboard-config
- xkbcomp : x11/xkbcomp
- dri.pc : graphics/mesa-dri
- dmx.pc : x11/libdmx
- x11.pc : x11/libX11
- xaw7.pc : x11-toolkits/libXaw
- xext.pc : x11/libXext
- xfixes.pc : x11/libXfixes
- xi.pc : x11/libXi
- xmu.pc : x11-toolkits/libXmu
- xpm.pc : x11/libXpm
- xrender.pc : x11/libXrender
- xres.pc : x11/libXres
- xt.pc : x11-toolkits/libXt
- xtst.pc : x11/libXtst
- pixman-1.pc : x11/pixman
- xau.pc : x11/libXau
- xdmcp.pc : x11/libXdmcp
- xfont2.pc : x11-fonts/libXfont2
- xkbfile.pc : x11/libxkbfile
- xshmfence.pc : x11/libxshmfence
- Library dependencies:
-
- libudev.so : devel/libudev-devd
- libGL.so : graphics/mesa-libs
- libunwind.so : devel/libunwind
- There are no ports dependent upon this port
Configuration Options:- ===> The following configuration options are available for xorg-dmx-1.20.8_4,1:
SUID=on: Install setuid wrapper to allow startx as non-root
====> Backend to use for input device configuration: you can only select none or one of them
DEVD=off: Use devd for autoconfiguration of input devices
UDEV=on: Use udev via libudev-devd for autoconfiguration of input devices
===> Use 'make config' to modify these settings
- Options name:
- x11-servers_xorg-dmx
- USES:
- compiler:c11 cpe gl gmake perl5 ssl xorg xorg-cat:xserver xorg xorg
- pkg-message:
- For install:
- Xorg-server has been installed.
If your kernel is compiled with the EVDEV_SUPPORT option enabled
(default starting from FreeBSD 12.1) it is recommended to enable evdev mode in
pointer device drivers like ums(4) and psm(4). This will give improvements like
better tilt wheel support for mice and centralized gesture support via
xf86-input-synaptics or libinput drivers for touchpads.
This is also needed for PS/2 devices to be properly detected by Xorg when
moused service is disabled in /etc/rc.conf and kernel is compiled with
EVDEV_SUPPORT.
To enable evdev in such a device, run the following:
# sysctl kern.evdev.rcpt_mask=6
To make it persistent across reboots, add the following to /etc/sysctl.conf:
kern.evdev.rcpt_mask=6
In case you're using a serial mouse or any other mouse that *only* works over
sysmouse(4) and moused(8) on an evdev enabled kernel, please run this:
# sysctl kern.evdev.rcpt_mask=3
To make it persistent across reboots, add to this /etc/sysctl.conf:
kern.evdev.rcpt_mask=3
- Master Sites:
|
As an Amazon Associate I earn from qualifying purchases.