x11-toolkits/SoXt: Update version 1.3.0=>1.4.1

- Update WWW
- Update LICENSE to BSD3CLAUSE

Chagnelog: https://github.com/coin3d/soxt/releases/tag/v1.4.1

x11-toolkits/SoXt: Impelled to share/man

x11-toolkits/SoXt: Mark BROKEN for 15

Unless graphics/Coin is updated this cannot be fixed

x11-toolkits/SoXt: Mark BROKEN on 14

Fails to build with:
error: couldn't compile and link with Motif

Sponsored by:	The FreeBSD Foundation

audio/opus: bump consumers after update to 1.4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

x11-toolkits/SoXt: Add LICENSE, clarify USE_GL

Approved by:	portgmr blanket

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Change my non-FreeBSD MAINTAINER mail to bofh@

Approved by:	bapt

Allow building without /usr/bin/perl symlink

PR:		ports/195494

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Update WWW and MASTER_SITES for four coin3d ports

 * graphics/Coin
 * graphics/simage
 * x11-toolkits/soqt
 * x11-toolkits/soXt

PR:		192442
Submitted by:	Shane Ambler
Approved by:	general blanket (1/4 ports maintained)

- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

- Remove s/aout/elf/ patch.  It is handled by USES=libtool.
- Remove reference to PTHREAD_LIBS.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage
Modernize

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

Convert from USE_MOTIF to USES=motif
While here:
- Trim headers
- Convert USE_GMAKE to USES=gmake
- Remove indefinite article from comment

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- update png to 1.5.10

Update to 1.3.0
Pass maintainership to submitter

PR:             ports/165531
Submitted by:   Muhammad Moinur Rahman <5u623l20 at gmail.com>

Sort plist
Reformat description

Fix master_site

 - remove MD5

Mark broken some ports with unfetchable distfiles

Bump PORTREVISION after open-mofit update

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- BUMP PORTREVISION due of update of graphics/Coin

Approved by:    itetcu (mentor)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Fix build, needs Xi

Reported by:    pointyhat

- Chase graphics/Coin shlib bump
- Bump portrevision

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

bump PORTVERSION for shared library version changed of graphics/Coin

Reported by:    erwin via pointyhat

Build requires perl.

Reported by:    pointyhat

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix build after objformat removal

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update to 1.2.2

change the libtool version to use from 1.3 to 1.5

Add missing file

Clean up time for email addresses MIA!
If you know new email addresses for the people involved, please send-pr it!

<mcsi@agava.com>: host relay.agava.net.ru[195.161.118.3] said: 550
    <mcsi@agava.com>: User unknown in local recipient table (in reply to RCPT
    TO command)

<woju@bbsmail.ntu.edu.tw> (expanded from <woju@bbsmail>): Host or domain name
    not found. Name service error for name=bbsmail.ntu.edu.tw type=A: Host not
    found

<esoha@attbi.com>: host gateway.attbi.com[204.127.198.6] said: 551 not our
    customer (in reply to RCPT TO command)

<crow@nektor.hu>: host mail.kapu.hu[195.70.32.236] said: 550 unknown user (in

Trim whitespace.

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

an open source implementation of the SGI InventorXt library, which
Xis a GUI binding for using Open Inventor with Xt/Motif.

PR:             51351
Submitted by:   Roland Jesse <roland.jesse@gmx.net>