19:33 Rene Ladan (rene) 

x11-toolkits/fox14: Remove expired port

2023-07-26 x11-toolkits/fox14: Obsolete leaf port, use x11-toolkits/fox(16,17)
instead

    1b00949

17:25 Jason E. Hale (jhale) 

x11-toolkits/fox14: Fix build with llvm16

While here, mark as DEPRECATED and set EXPIRATION date to
2023-07-26. This is an ancient version of the FOX toolkit released in
2006 and has long been a leaf port.

    47572e0

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:23 Tobias C. Berner (tcberner) 

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dima Sivachenko <dima@Chg.RU>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Juli Mallett
  *  Kenjiro Cho <kjc@csl.sony.co.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Marc Recht <marc@informatik.uni-bremen.de>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Grünewald <michipili@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mike Meyer <mwm@mired.org>
  *  Olivier Duchateau
  *  Paul Schmehl <pauls@utdallas.edu>
  *  Peter Hawkins <thepish@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Radim Kolar
  *  Rene Ladan <rene@FreeBSD.org>
  *  Robert C. Noland III <rnoland@FreeBSD.org>
  *  Simon Barner <barner@gmx.de>
  *  Stephane Legrand <stephane@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Will Andrews <andrews@technologist.com>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zane C, Bowers <vvelox@vvelox.net>
  *  asami
  *  chinsan
  *  chuckr
  *  clsung@dragon2.net
  *  dmitry@karasik.eu.org
  *  fjoe@FreeBSD.org
  *  gahr
  *  gena
  *  ijliao
  *  mi
  *  minter@lunenburg.org
  *  nivit@users.sourceforge.net
  *  ports@c0decafe.net
  *  roland.jesse@gmx.net
  *  thierry@pompo.net
  *  vanilla

With hat:	portmgr

    71b6a9f

13:59 Dmitry Marakasov (amdmi3) 

x11-toolkits/fox14: minor cleanup

    de92684

18:53 Kevin Bowling (kbowling) 

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

    da3162c

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

18:36 zeising 

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

18:33 antoine 

Convert to USES=jpeg

 

19:37 marino 

3 ports categories: Remove $PTHREAD_LIBS

Categories: editors, x11, x11-toolkits

approved by:	PTHREAD blanket

 

14:16 amdmi3 

- Pet portlint
- Add LICENSE
- Strip libraries

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

22:29 gahr 

- Reset maintainership of my ports

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

09:26 amdmi3 

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

 

17:14 adamw 

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

19:03 tijl 

Small fixup for r346834: use the upstream library version.

 

23:15 bapt 

Convert to USES=libtool

 

13:14 gahr 

- Refactor FOX ports

  * Remove CONFLICTS between FOX ports by having man-pages
    and binaries named after the port version
  * Avoid bumping shlib version at each minor update by using
    ltverhack [1]
  * Make PKGNAMEs unique (fox14, fox16, fox17) [2]
  * Use new LIB_DEPENDS format

Suggested by:	mezz [1], bapt [2]

 

23:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

 

12:21 gahr 

- Restore CONFLICTS, which had been commented out to test r305197

 

05:26 dinoex 

- update png to 1.5.10

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

13:58 gahr 

- Update CONFLICTS to reflect the latest changes in the FOX ToolKit ports

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

16:36 gahr 

- Take maintainship from araujo

Approved by:    aroujo  (implicit, email to ports@)
Message-ID:     20100222114814.GB29137@ponderosa.intelbras.com.br

11:46 dinoex 

- update to jpeg-8

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

11:11 dinoex 

- update to jpeg7
Tested by:      pav on pointyhat

11:57 araujo 

- These ports needs libcups.so to build.

PR:             ports/134662
Submitted by:   dionex

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

16:29 araujo 

- Change my mail address to araujo@.

Approved by:    stas (mentor)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

15:01 shaun 

- Upgrade to 1.4.35.
- Hand over maintainership to submitter, since he now maintains the
  other fox ports.

PR:             ports/109142
Submitted by:   Marcelo Araujo <araujo@bsdmail.org>

10:52 rafan 

- Trasnfer maintainership from alecn2002@yandex.ru to
  araujo@bsdmail.org except fox14 (owned by shuan@)
- Correctly register CONFLICTS
- While I'm here, correctly respect NOPORTDOCS

Approved by:    maintainer (fox10, fox12, fox16), shuan (implicit for fox14)

17:06 pav 

- Remove support for xfree86-3

PR:             ports/106666
Submitted by:   vd
With hat:       portmgr

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

20:59 shaun 

- Update to 1.4.32
- Take maintainership

PR:             ports/97764
Submitted by:   shaun (me)
Approved by:    ahze (mentor)

15:51 sem 

- Rename x11-toolkits/fox -> x11-toolkits/fox10 and
   x11-toolkits/fox-devel -> x11-toolkits/fox14