18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

12:42 antoine 

Finish glib12 deprecation

 

18:34 zeising 

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

 

14:40 mat 

Add NLS option to ports using it but not defining it.

 

18:41 zeising 

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

 

19:52 tijl 

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

12:51 mat 

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

15:11 tijl 

devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
  didn't conflict with early development versions of glib/gtk 2.0

 

16:30 amdmi3 

- Properly handle shared directory in plist

PR:		191112
Submitted by:	amdmi3
Approved by:	kwm

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

14:56 miwi 

- Stage support

 

16:24 kwm 

Fix pkgname collisions in gtk??[mm] ports.

 

23:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

 

17:55 az 

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Reviewed by:	kwm@
Approved by:	kwm@ (gnome@)

 

06:41 bapt 

Finish converting x11* from WITHOUT_NLS to PORT_OPTIONS:MNLS

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

01:37 mezz 

Only need Perl in the build time.

PR:             ports/145835
Submitted by:   Bapt <baptiste.daroussin@gmail.com>

22:17 naddy 

Quote first argument to AC_DEFUN() to shut up aclocal warning.

Feature safe:   yes

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

01:36 araujo 

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

14:16 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

08:54 marcus 

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:49 bland 

Fix inter-library dependency on libgdk.

Reported by:    krismail

15:40 pav 

- Use INFO

Requested by:   krion

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

18:17 marcus 

Always add the default gtkrc file to the search path so that we know we'll
have some sane theme properties when using KDE 3 or GNOME 2.

Submitted by:   kan

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

06:07 kris 

Respect WITHOUT_NLS.

Approved by:    maintainer

04:36 marcus 

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

18:12 trevor 

Now gettext 0.12.1 is gettext-old.

20:25 marcus 

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

05:41 marcus 

Chase the libintl.so shared lib version.

19:54 marcus 

Remove USE_GNOMENG.

06:14 ade 

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

20:11 marcus 

Now that Glib 1.2 and GTK+ 1.2 are the only versions in the tree that use
the old xxx-config files, remove the "12" suffix.  This will allow people
building Glib and GTK+ ports by hand to do so without a lot of extra
hacking.  Since these ports are so heavily used, the xxx12-config files
aren't removed completely, but rather symlinked to their xxx-config
counterparts.

PR:             39417

17:07 marcus 

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

16:27 marcus 

Remove mention of the WITH_XINPUT macro.

Submitted by:   netchild

18:12 marcus 

Enable XInput by default.  Apparently, this doesn't hurt anything, and will
help people using certain input devices and in certain locales.

Requested by:   netchild, Teemu Hakala <temmi.hoo@kolumbus.fi>

06:23 marcus 

Add a knob for enabling XInput support.

Submitted by:   Rocco Caputo <troc@netrus.net> (with some modification)

16:22 ade 

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

17:19 sobomax 

Convert to USE_GNOMENG.

04:20 marcus 

Fix another problem in the pkgconfig files for these ports.  After running
a build of xscreensaver and xscreensaver-gnome, everything looks good.

Reported by:    dougb

21:42 marcus 

Correct the name of the gdk library in the gdk pkgconfig file.  This should get
xscreensaver building correctly without needing to delete pkgconfig.
Bump PORTREVISION.

Reported by:    many

15:33 sobomax 

Correct gtk+/glib libraries names in .pc files.

Submitted by:   alfred

17:10 ade 

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

19:44 ade 

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

19:18 nectar 

When creating shared memory segments, make them readable/writable   only by the
owner.    

23:16 ade 

Add removal of libdata/ to the plist.  Ideally, this should be fixed   by adding
libdata to the X11 mtree's, but this hack will do for now,   and let bento build
the 506 ports that apparently depend on gtk12 :)    

01:49 ade 

Add pkgconfig support to most of the core of GNOME 1.4 and GTK+/GLIB 1.2   to
make transitioning to GNOME/GTK+/GLIB a little easier.    

17:36 ade 

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

16:45 ade 

Update to 1.2.10 - note that there were some critical bugs in 1.2.9   for i18n
users - everyone is strongly urged to upgrade, particularly   GNOME users.    

17:16 ben 

Add .uk master site.    

05:42 ade 

Sigh.  Reclaim these, primarily for GNOME 1.4    

05:34 vanilla 

Someone don't like my style, so I drop maintainer now.    

21:50 sf 

make MASTER_SITE_SUBDIR more effective.    

17:06 sf 

add MASTER_SITE_RINGSERVER.    

14:12 vanilla 

Add --with-native-locale to CONFIGURE_ARGS.    

12:30 vanilla 

Upgrade to 1.2.9    

22:30 vanilla 

Bump version.   Reminded by:	dima    

07:23 reg 

Implement USE_GLIB.    

22:52 asami 

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

11:38 sobomax 

Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with  
ldconfig in PLIST need personal consideration.    

14:31 sobomax 

Move responsibility for the lib/gtk/engines directory into gtk12 port. This  
directory is shared between at least 3 ports (GTK+ theme engines).    

13:45 sobomax 

Oops, forgot to remove unneded line.    

13:23 sobomax 

Update glib/gtk++ to 1.2.8.