notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

Port details
py-python-xlib X11 library for Python
0.33 x11-toolkits on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port View this port on Repology. pkg-fallout 0.33Version of this port present on the latest quarterly branch.
Maintainer: fax@nohik.ee search for ports maintained by this maintainer
Port Added: 2022-06-21 12:03:04
Last Update: 2024-02-29 07:18:32
Commit Hash: 5d4139f
Also Listed In: python
License: LGPL21+
WWW:
https://github.com/python-xlib/python-xlib
Description:
The Python X Library is a complete X11R6 client-side implementation written in pure Python. It can be used to write low-level X client applications in Python.
Homepage    cgit ¦ Codeberg ¦ GitHub ¦ GitLab ¦ SVNWeb - no subversion history for this port

Manual pages:
FreshPorts has no man page information for this port.
pkg-plist: as obtained via: make generate-plist
There is no configure plist information for this port.
Dependency lines:
  • ${PYTHON_PKGNAMEPREFIX}python-xlib>0:x11-toolkits/py-python-xlib@${PY_FLAVOR}
To install the port:
cd /usr/ports/x11-toolkits/py-python-xlib/ && make install clean
To add the package, run one of these commands:
  • pkg install x11-toolkits/py-python-xlib
  • pkg install py39-python-xlib
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-python-xlib listed in the above command, you can pick from the names under the Packages section.
PKGNAME: py39-python-xlib
Package flavors (<flavor>: <package>)
  • py39: py39-python-xlib
distinfo:
TIMESTAMP = 1694525409 SHA256 (python-xlib-python-xlib-0.33_GH0.tar.gz) = e10d1b49655800bffe0fbb5eb31eeef915a4421952ef006d468d53d34901f6f8 SIZE (python-xlib-python-xlib-0.33_GH0.tar.gz) = 268782

Packages (timestamps in pop-ups are UTC):
py39-python-xlib
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest0.330.33-0.330.33---
FreeBSD:13:quarterly0.330.330.310.330.330.330.330.33
FreeBSD:14:latest0.330.330.310.330.330.31-0.31
FreeBSD:14:quarterly0.330.33-0.330.330.330.330.33
FreeBSD:15:latest0.330.33n/a0.33n/a0.330.330.33
Dependencies
NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
Build dependencies:
  1. py39-setuptools-scm>1.7 : devel/py-setuptools-scm@py39
  2. py39-six>=1.10.0 : devel/py-six@py39
  3. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  4. python3.9 : lang/python39
Test dependencies:
  1. python3.9 : lang/python39
Runtime dependencies:
  1. py39-six>=1.10.0 : devel/py-six@py39
  2. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  3. python3.9 : lang/python39
This port is required by:
for Build
  1. deskutils/py-autokey
  2. x11/py-pynput
for Run
  1. deskutils/py-autokey
  2. devel/py-ewmh
  3. graphics/py-ueberzug
  4. misc/py-PyUserInput
  5. x11/mate-dock-applet
  6. x11/py-i3ipc
  7. x11/py-mouseinfo
Expand this list (10 items / 3 hidden - sorry, this count includes any deleted ports)
  1. Collapse this list).
  2. x11/py-pyautogui
  3. x11/py-pynput
  4. x11-wm/chamfer
  5. Collapse this list.

Configuration Options:
No options to configure
Options name:
x11-toolkits_py-python-xlib
USES:
python tar:bz2
FreshPorts was unable to extract/find any pkg message
Master Sites:
Expand this list (1 items)
Collapse this list.
  1. https://codeload.github.com/python-xlib/python-xlib/tar.gz/0.33?dummy=/
Collapse this list.
Port Moves
  • port moved here from x11-toolkits/py-xlib on 2022-06-21
    REASON: Use registered upstream (PyPI) name (Python ports compliance)

Number of commits found: 8

Commit History - (may be incomplete: for full details, see links to repositories near top of page)
CommitCreditsLog message
0.33
29 Feb 2024 07:18:32
commit hash: 5d4139f8bdb67bd6e8328422f9762661bd0d6454commit hash: 5d4139f8bdb67bd6e8328422f9762661bd0d6454commit hash: 5d4139f8bdb67bd6e8328422f9762661bd0d6454commit hash: 5d4139f8bdb67bd6e8328422f9762661bd0d6454 files touched by this commit
Charlie Li (vishwin) search for other commits by this committer
devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288
0.33
24 Sep 2023 18:57:16
commit hash: 58f84a0c12f8cbf44037c178afbb09eccfe0b83acommit hash: 58f84a0c12f8cbf44037c178afbb09eccfe0b83acommit hash: 58f84a0c12f8cbf44037c178afbb09eccfe0b83acommit hash: 58f84a0c12f8cbf44037c178afbb09eccfe0b83a files touched by this commit
Robert Clausecker (fuz) search for other commits by this committer
Author: Olivier Duchateau
x11-toolkits/py-python-xlib: update to 0.33

Changelog: https://github.com/python-xlib/python-xlib/releases/tag/0.33

PR:		273743
Approved by:	Eero Hänninen <fax@nohik.ee> (maintainer)
0.31
27 Jun 2023 19:34:34
commit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacb files touched by this commit
Rene Ladan (rene) search for other commits by this committer
all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>
0.31
25 Oct 2022 12:14:09
commit hash: 8022bde02077262bdbe79122a6da6cc5f86f9db6commit hash: 8022bde02077262bdbe79122a6da6cc5f86f9db6commit hash: 8022bde02077262bdbe79122a6da6cc5f86f9db6commit hash: 8022bde02077262bdbe79122a6da6cc5f86f9db6 files touched by this commit
Li-Wen Hsu (lwhsu) search for other commits by this committer
Author: Eero Hanninen
x11-toolkits/py-python-xlib: Update to 0.31

PR:		267326
07 Sep 2022 21:58:51
commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)
0.27
07 Sep 2022 21:10:59
commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
0.27
20 Jul 2022 14:23:40
commit hash: 71b6a9f9c7b4d46953a1ce59dc242f0ba1c28f17commit hash: 71b6a9f9c7b4d46953a1ce59dc242f0ba1c28f17commit hash: 71b6a9f9c7b4d46953a1ce59dc242f0ba1c28f17commit hash: 71b6a9f9c7b4d46953a1ce59dc242f0ba1c28f17 files touched by this commit
Tobias C. Berner (tcberner) search for other commits by this committer
x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
0.27
21 Jun 2022 12:01:51
commit hash: 0ddc9a1ee526fd959d2328e058b1eeb8e6ec778ccommit hash: 0ddc9a1ee526fd959d2328e058b1eeb8e6ec778ccommit hash: 0ddc9a1ee526fd959d2328e058b1eeb8e6ec778ccommit hash: 0ddc9a1ee526fd959d2328e058b1eeb8e6ec778c files touched by this commit
Lorenzo Salvadore (salvadore) search for other commits by this committer
x11-toolkits/py-xlib: Rename as py-python-xlib

Requested by:	koobs
Approved by:	koobs (python ports compliance)

Number of commits found: 8