notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

non port: x11-toolkits/qt5-quickcontrols/pkg-plist

Number of commits found: 11

Tuesday, 1 Oct 2019
04:13 tcberner search for other commits by this committer
Qt5 update to 5.13.0

For new features, check: https://wiki.qt.io/New_Features_in_Qt_5.13

Thanks to adridg who helped to fix a lot of packages.

Exp-run by:	antoine
PR:		238782
Original commitRevision:513447 
Friday, 18 May 2018
12:27 rakuco search for other commits by this committer
Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213
Original commitRevision:470288 
Sunday, 21 Jan 2018
11:46 rakuco search for other commits by this committer
Drop %%DEBUG%% from several plist entries.

Those items were added with %%DEBUG%% when we updated Qt to 5.3.2. At the time,
src/dialogs/dialogs.pro had the following excerpt:

    # In case of a debug build, deploy the QML files too
    CONFIG(debug, debug|release): QML_FILES += $$DIALOGS_QML_FILES

but that actually changed in Qt 5.9.0, which dropped the check altogether and
always adds those files to QML_FILES.

Not shipping them causes runtime issues according to the bug report below.

PR:		225347
Submitted by:	Tomasz Kowalczyk <kowalczt@zoho.eu>
Original commitRevision:459589 
Saturday, 6 Jan 2018
21:30 rakuco search for other commits by this committer
Update Qt5 ports to 5.9.3.

This took quite a lot of time because Qt's own build system underwent
several changes in 5.8.0 that took a while to adapt to.

And, of course, qt5-webengine is a behemoth that we need to patch like crazy
due to its bundling of Chromium. In fact, most of the Chromium patches in
qt5-webengine have been imported with no changes from www/chromium@433510
("www/chromium: update to 56.0.2924.87").

New port: accessibility/qt5-speech

Bigger changes to Qt5 ports we had to make:
- Qt now allows using a configure.json file to define configuration options
  and specify configuration checks that can be done when qmake is invoked.
  However, configure.json checks done in a subdirectory only propagates to
  subdirectories, and checks elsewhere will fail if all .pro files are being
  parsed at once (i.e. qmake -recursive), so several ports had to switch to
  USES=qmake:norecursive along with manual additional qmake invocations in
  subdirectories in order to work. It's been mentioned in a few places such
  as Qt's bug tracker that qmake's recursive mode is pretty much deprecated,
  so we might switch to non-recursive mode by default in the future.

- Uses/qmake.mk: Introduce QMAKE_CONFIGURE_ARGS. qmake now accepts
  arbitrary options such as '-foo' and '-no-bar' at the end of the
  command-line. They can be specified in QMAKE_CONFIGURE_ARGS.

- graphics/qt5-wayland: The port can only be built if graphics/mesa-libs is
  built with the WAYLAND option, so a corresponding option (off by default)
  was added to the port.

- misc/qt5-doc: Switch to a pre-built documentation tarball. The existing
  port was not working with Qt 5.9. Instead of trying to fix it, switch to
  what Gentoo does and fetch a tarball that already contains all
  documentation so that we do not have to build anything at all. The
  tarball's name and location in download.qt.io look a bit weird, but it
  seems to work fine.

- www/qt5-webengine: Use binutils from ports, Chromium's GN build system
  generates a build.ninja that uses ar(1) with the @file syntax that is not
  supported by BSD ar, so we need to use GNU ar from binutils.

- x11-toolkits/qt5-declarative-render2d: This port was merged into the main
  Qt Declarative repository upstream, and into x11-toolkits/qt5-quick in the
  ports tree.

Changes to other ports we had to make:
- biology/ugene: Drop a '#define point "."' that is not present in more
  recent versions of the port. Defining a macro with such a common name
  causes build issues with Qt 5.9, which uses |point| as an argument name in
  methods.

- cad/qelectrotech: Fix plist with Qt 5.9. Directories are no longer
  installed with `cp -f -R', but rather `qmake install qinstall', which does
  not install

   
%%DATADIR%%/elements/10_electric/20_manufacturers_articles/bosch_rexroth/.directory

  That's a local file that should not even have been part of the tarball
  anyway.

- chinese/gcin-qt5: Add additional private Qt directories (which should not
  be used in the first place) to get the port to build with Qt 5.9.

- devel/qtcreator: Fix plist with Qt 5.9. Something changed in qdoc and some
  test classes no longer generate documentation files.

- security/keepassx-devel: Import a patch sent upstream almost a year ago to
  fix the build with Qt 5.9.

Thanks to antoine for the exp-run, and tcberner and Laurent Cimon
<laurent@nuxi.ca> for landing changes in our qt-5.9 branch.

PR:		224849
Original commitRevision:458293 
Saturday, 18 Feb 2017
19:48 tcberner search for other commits by this committer
Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some more

* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
  By moving the libraries we should finally be able to get rid of the inplace
  upgrade bug (see ports bugs 194088, 195105 and 198720):  when Qt5's libraries
  were lying in /usr/local/lib, which would often get added by pkgconfig to the
  linker paths via dependencies, the already installed libraries were linked
  against, instead of the ones that were being built. This forced us to make
  sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
  linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]

There are several new Qt5 ports which all have been created by Marie Loise
Nolden
<nolden@kde.org>. Thanks again.

PR:		216797
Exp-Run by:	antoine
Reviewed by:	rakuco, mat, groot_kde.org
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D9213
Original commitRevision:434380 
Saturday, 17 Sep 2016
09:46 rakuco search for other commits by this committer
Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
  as they are not huge and destabilizing.
- When Qt detects the compiler supports C++11, it will pass -std=gnu++11 by
  default (this is an upstream change). You can add "CONFIG -= c++11" to
  your .pro. Qt 5.7 will require C++11.
- www/webkit-qt5: The QtWebKit module is deprecated upstream, and is shipped
  separately as a community release tarball. kde@ does not have an ETA for a
  qt5-webengine port, as it requires a huge effort (and number of patches)
  similar to maintaining www/chromium itself.
- x11-toolkits/qt5-declarative has been deprecated upstream. The last
  release is 5.5.1.

Relevant changes:
- devel/qmake5: The freebsd-clang mkspec has become the default mkspec on
  FreeBSD, replacing the outdated freebsd-g++ one that was moved to
  unsupported/ (it still works though).
- devel/qt5-qdoc: qdoc was moved to qttools upstream, but its data files are
  still in qtbase. The data files are now in the qt5-qdoc-data port.
- misc/qt5-doc: Clean up and stop requiring a compiler and fumbling with
  mkspecs. Instead of running the `configure' script, which requires a
  compiler and adjustments to the mkspecs files and also ends up building a
  new qmake binary, we now leverage USES=qmake to generate all the Makefiles
  from the top-level qt.pro. Getting this to work requires some tricks,
  though, and qt.conf.in has a longer explanation of what's being done.
  Switch to USES=gmake to be able to drop MAKE_JOBS_UNSAFE=yes.

New ports:
- comms/qt5-serialbus
- devel/qt5-qdoc-data
- x11-toolkits/qt5-quickcontrols2

Big thanks to Adriaan de Groot (groot@kde.org), tcberner@ and Loise Nolden
(nolden@kde.org) for the huge amount of work they put into this
patch. Loise in particular also sent quite a few changes upstream that were
essential for this update to work.

PR:		211916
Original commitRevision:422306 
Sunday, 24 Jan 2016
18:10 rakuco search for other commits by this committer
Update Qt5 to 5.5.1.

This is the latest stable release at time of writing.

Release announcement: http://blog.qt.io/blog/2015/07/01/qt-5-5-released/
New features in Qt 5.5: https://wiki.qt.io/New_Features_in_Qt_5.5

As usual, huge thanks to Tobias Berner (tcberner@gmail.com) for all his work
on these ports in kde@'s experimental area51 repository. He's the one who
started the update and did a lot of the initial work on Qt 5.5. Ralf Nolden
(nolden@kde.org) has contributed the initial version of most of our new Qt5
ports.

Also thanks to Yuri Victorovich (yuri@rawbw.com) for contributing PR 205805
with his own patch for the 5.5.1 update. Some of his changes there prompted
additional fixes and changes present in the final patch generated from our
experimental repository.

New ports:
- comms/qt5-connectivity, comms/qt5-sensors, devel/qt5-location,
  graphics/qt5-3d, net/qt5-enginio, x11-toolkits/qt5-canvas3d,
  x11-toolkits/qt5-uiplugin.

General changes in all Qt5 ports:
- All Qt5 ports are now built with -Wl,--as-needed to avoid overlinking,
  which is a problem with qmake-based because the libraries passed to the
  linker come from the modules .pri files and many are not necessary.
- With this change, several ports had their USE_QT5 lines adjusted to
  explicitly include some libraries that were pulled in implicitly, and to
  exclude libraries no longer required with -Wl,--as-needed.

Changes in specific ports:
- devel/qt5: Drop the SQL_PLUGINS and TOOLS options and depend on all Qt5
  ports by default. It makes the Makefile much simpler, and those options
  were already on by default.
- devel/qt5-core: The clang+base libstdc++ workaround has been expanded and
  more C++11 features have been disabled when that combination is used by a
  port (basically, FreeBSD 9 with USES=compiler:c++11-lang). The disabled
  features have explanations for why they were disabled in the patched
  header itself.
- devel/qt5-designer: uiplugins has been split out following a similar
  change upstream. By depending on qt5-uiplugin, qt5-uitools avoids having
  to depend on the big qt5-designer port.
- multimedia/qt5-multimedia: The port now uses GStreamer 1.0 instead of
  0.10.
- net/qt5-network: The port now depends on libproxy for proxy settings.
  Using libproxy allows proxy settings to be read from different sources,
  and also allows .pac files to work with Qt.
- www/qt5-webkit: The port now uses GStreamer 1.0 instead of 0.10.

PR:		205805
PR:		206435
Original commitRevision:407169 
Wednesday, 18 Mar 2015
09:37 rakuco search for other commits by this committer
Update Qt5 to 5.4.1.

This is probably the first time our Qt 5 ports are tracking the latest
upstream release :-)

There isn't much to report in this update, thanks to the effort spent in the
5.2->5.3 update: a lot of the work is just small plist and patch updates.
Thankfully, several patches have been upstreamed and are not needed on our
side anymore.

I would like to thank Alex Richardson <arichardson.kde@gmail.com> and Tobias
Berner <tcberner@gmail.com> for their help with the plist updates and
general testing.

PR:		198585
Original commitRevision:381532 
Wednesday, 5 Nov 2014
09:39 rakuco search for other commits by this committer
Update Qt5 ports to 5.3.2.

Proudly presented by the KDE on FreeBSD team, with several guest stars.

This update took way longer than initially expected due to us previously
accumulating assumptions and changes to Qt's build system that finally bit
us back with the 5.3 release series, so we had to do a fair amount of
cleanup.

New ports:
- comms/qt5-serialport: Qt functions to access serial ports, originally
                        based on work by Fernando Apesteguia. [1]
- devel/qt5-qdoc: Qt documentation generator, the Qt5 equivalent of
                  devel/qt4-qdoc3. Originally worked on by Tobias Berner.
                  It had already been half-split from devel/qt5-buildtools,
                  we just needed to finish the work.

Dead ports:
- devel/qt5-qmldevtools: Merged into lang/qt5-qml.

Minor changes:
- devel/qt5: Add x11/qt5-x11extras and the new ports to the dependency list.
- graphics/qt5-imageformats: The port now supports the JPEG2000, WEBP,
                             Direct Draw Surface and ICNS formats.
- multimedia/qt5-multimedia: The ALSA and PULSEAUDIO options are now
                             mutually exclusive due to changes introduced in
                             Qt 5.3.0 (the ALSA code is now a proper plugin
                             that is only built if PulseAudio is not used).
- x11/qt5-x11extras: Add USE_LDCONFIG since the port installs a shared
                     library.

The big changes:
- bsd.qt.mk: Set QMAKESPEC instead of QMAKEPATH. [3]
  QMAKEPATH does much more than we want now that we call qmake from the top
  of ${WRKSRC}. qmake uses QMAKEPATH when evaluating the QMAKE_MKSPECS
  property, which is in turn used by qt_config.pri to load the .pri files in
  mkspecs/modules.

  In practice, this means that if people have an older Qt installation those
  files will be used and QT_CONFIG will have values such as "gui" even if
  one is building a port like textproc/qt5-xml, which passes -no-gui to the
  configure script. Consequently, unintended code paths may be enabled or
  the configuration step can just fail if the .pro files expect values that
  are not present in the system-wide, older .pri files.

  We avoid all those problems if we use QMAKESPEC, as qmake does not take
  its value into account when evaluating the QMAKE_MKSPECS property and will
  only parse the files in the mkspec's directory (mkspecs/freebsd-clang, for
  example, instead of all the files in mkspecs).

- Stop explicitly passing ${LOCALBASE} to the compiler. [3]
  qmake's behavior has changed in Qt 5, and the paths set in QMAKE_INCDIR
  and QMAKE_LIBDIR in the mkspecs are passed before any others, such as the
  ones in the build directory themselves.

  In practice, this means that we end up with linker calls like this:

  c++ -o libfoo.so foo.o bar.o -L/usr/local/lib -L/wrkdir/build/lib
      -lQt5Gui -lQt5Core

  So if one already has Qt installed in the system, the older, already
  present version of the libraries in /usr/local/lib will be used instead of
  the newly-built ones in /wrkdir/build/lib.

  QTBUG-40825 discusses this behavior upstream, but there has been no
  agreement on a solution yet.

  For now, the solution adopted is to make the compiler and the linker aware
  of those paths but only try them last after all others, and this is
  achieved by setting the CPATH and LIBRARY_PATH environment variables when
  qmake is being used.

  In addition to setting them in CONFIGURE_ENV and MAKE_ENV, we also need to
  stop changing QMAKE_INCDIR and QMAKE_LIBDIR as well as filter those paths
  from the pkg-config calls qtbase's configure script makes.

- Call qmake from the root of the ${WRKSRC}.

  In Qt 5.3, Qt's build infrastructure has undergone some changes that make
  our previous approach of calling qmake from the directories we want to
  build stop working. Things would break even more in Qt 5.4, in which
  qtbase's configure script does not accept the -process, -fully-process and
  -dont-process arguments anymore (it always behaves as if -process had been
  used).

  Bite the bullet and start calling qmake from ${WRKSRC}. The largest part of
  this change involves changing lines in Makefiles from
    WRKSRC_SUBDIR=	foo/bar
  to
    BUILD_WRKSRC=		${WRKSRC}/foo/bar
    INSTALL_WRKSRC=		${WRKSRC}/foo/bar
  as well as adding patches to .pro files to avoid entering other
  subdirectories and removing post-configure targets that are not necessary
  anymore.

  Since qmake needs to be called from the top of ${WRKSRC} anyway, we can
  also simplify the configuration process for the qtbase ports a little.
  Looking at r10019 it is not clear why we started calling qmake in the
  pre-configure target in addition to the post-configure one (while also
  skipping it in do-configure), but we can now drop this call since letting
  configure behave as if -process had been passed means it will call qmake
  on its own and overwrite the files generated by the pre-configure call. We
  still need to call qmake in post-configure though, as the configure script
  does not pass -recursive when calling qmake and we need to be able to call
  make from any subdirectory when building.

PR:		194762 [1]
PR:		194566 # exp-run with base GCC and clang
PR:		194088 [3]
Original commitRevision:372179 
Thursday, 23 Oct 2014
21:35 rakuco search for other commits by this committer
Remove @dirrm and @dirrmtry entries from the Qt ports.
Original commitRevision:371415 
Monday, 28 Jul 2014
20:43 rakuco search for other commits by this committer
Add x11-toolkits/qt5-quickcontrols.

The Qt Quick Controls module provides a set of controls that can be
used to build complete interfaces in Qt Quick.

Submitted by:	Tobias Berner <tcberner@gmail.com> via the kde-freebsd mailing
list
Original commitRevision:363254 

Number of commits found: 11