x11-wm/icewm: the port had been updated to version 3.3.1

Now fully supports nanosvg as an alternative to librsvg!

x11-wm/icewm: update IceWM to version 3.3.0

Build against `graphics/nanosvg' by default, which is currently
supported only with Imlib2 renderer.  Being a simple two-header
dependency, it does not warrant an additional option.  LIBRSVG2
would override it if selected.

x11-wm/icewm: update IceWM to version 3.2.3.

x11-wm/icewm: update IceWM to version 3.2.2

Remove situational patches added in commit cbcb71ff6481,
the problem had been addressed differently upstream.

x11-wm/icewm: update IceWM to version 3.2.1 (bugfix release).

x11-wm/icewm: fix invalid paths in desktop files

This caused graphical login managers, like slim, to fail on login.

PR:		267574
Reported by:	ron@digitalcombine.ca
MFH:		2022Q4

x11-wm/icewm: update IceWM to version 3.2.0

Backport the fix for annoying regression when the quick switch list
had not been properly updated while changing workspaces at the same
time with QuickSwitchToAllWorkspaces=0 (default setting).

x11-wm/icewm: update IceWM to version 3.1.0.

x11-wm/icewm: update IceWM to version 3.0.1 (bugfix release).

x11-wm/icewm: update IceWM to version 3.0.0

While this is not the major update as one might think, it does bring
one noticeable feature: support for tabbed windows (see the manpage).

Reported on:	www.opennet.ru

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-wm/icewm: update IceWM to version 2.9.9

While here, unbreak the build without the IMLIB2 option
after commit 5516d0f67bf6.

x11-wm: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger
  *  Alejandro Pulver <alepulver@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Brett Taylor <brett@peloton.physics.montana.edu>
  *  Brian Handy <handy@physics.montana.edu>
  *  Bruce A. Mah <bmah@ca.sandia.gov>

x11-wm/icewm: update IceWM to version 2.9.8.

x11-wm/icewm: update IceWM to version 2.9.7.

x11-wm/icewm: update IceWM to version 2.9.6.

x11-wm/icewm: update IceWM to version 2.9.5.

x11-wm/icewm: update IceWM to version 2.9.4.

x11-wm/icewm: update IceWM to version 2.9.3.

x11-wm/icewm: update IceWM to version 2.9.2 (bugfix release #2).

x11-wm/icewm: update IceWM to version 2.9.1 (bugfix release).

x11-wm/icewm: update IceWM to version 2.9.0.

x11-wm/icewm: update IceWM to version 2.8.0.

Reported on:	www.opennet.ru

x11-wm/icewm: update IceWM to version 2.7.0.

x11-wm/icewm: update IceWM to version 2.6.0.

x11-wm/icewm: update IceWM to version 2.5.0.

x11-wm/icewm: update IceWM to version 2.4.0.

- Update IceWM to version 2.3.4 which now upholds --disable-rsvg switch
- Revert bogus changes to USE_GNOME and BEASTIE_DESC done in cf6ea18e37
- Fix the header of `files/bsd-daemon.xpm' one more time: certain image
  loaders, e.g. Imlib2, employ overly zealous checks of XPM header (see
  line 155 of imlib2-1.7.0/src/modules/loaders/loader_xpm.c), so resort
  to more traditional /* XPM */ and move attribution to its own comment

x11-wm/icewm: Fix bsd-daemon.xpm

There was a problem with the initial comment in the xpm file that
prevented the image to be loaded properly.

PR:	255548
Reported by:	wolfgang@lyxys.ka.sub.org
Approved by:	portmaster@bsdforge.com (maintainer)

Update IceWM to version 2.3.3.

Update IceWM to version 2.3.2.

Remove # $FreeBSD$ from Makefiles.

Update IceWM to version 2.3.1.

- Update IceWM to version 2.2.1 (bugfix release)
- Rephrase and shorten COMMENT, amend pkg-descr
  based on the upstream description, and remove
  excessive attribution (put it in the XPM file)

Update IceWM to version 2.2.0.

Update IceWM to version 2.1.2.

Don't try to needlessly (or, as with --with-docdir, even bogusly) override
various directories and trust the default values from the configure script.

As a result, icehelp(1) now displays internal HTML help as expected, while
previously it could not find the files and showed empty window.

PR:	253091

Update IceWM to version 2.1.1.

- Update IceWM to version 2.0.1
- Imlib2 is now preferred for rendering
- Allow to build with SVG support

Update IceWM to version 1.9.2 (bugfix release).

Update IceWM to version 1.9.1.

Update IceWM to version 1.9.0.

Found out via:	www.opennet.ru

Update to version 1.8.3, mostly bugfix release.

- Update IceWM to version 1.8.2 which brings several bugfixes
  and the new Portuguese translations
- Remove local patch now that the problem is fixed upstream

- Update IceWM to version 1.8.0
- Adapt to strtok_r() behavior on FreeBSD (see
  https://github.com/ice-wm/icewm/issues/23)

Found out via:	www.opennet.ru

- Update IceWM to version 1.6.6 (long overdue; version 1.7.0 has issues)
- Now requires C++11-capable compiler (so drop USE_CXXSTD=c++98)
- Options ASM, GNOME, LITE, and MENUFIX had been fixed/removed upstream
- Explicitly list all needed libraries and X11 components to ensure
  robust build and simplify BEASTIE option handling while at it

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

First step at deorbitting esound:
remove esound options where it is possible to, categories x11*

x11-wm/icewm: Fix build with Clang 6

While here

- Fix license
- Add missing dependencies

PR:		228317
Submitted by:	Chris Hutchinson <portmaster@bsdforge.com> (based on)
Kudos to:	krion (for patiently test building many iterations of it)

Fix build on 11 and later with c++ compilers by default in c++11 mode

PR:		226213
Submitted by:	portmaster@bsdforge.com (maintainer)
MFH:		2018Q1 (ports-secteam build fix blanket)

Assign new maintainer

PR:		217991
Submitted by:	Chris Hutchinson <portmaster@bsdforge.com>
Approved by:	lme (mentor)
Differential Revision:	https://reviews.freebsd.org/D10092

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE
- Switch to USES=localbase
- Switch to options helpers

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been

- Add patch fixing reboot/shutdown command. Upstream seems unresponsive and
  this patch was adopted by Arch Linux some time ago. [1]
- Cleanup pkg-plist while here

Bug report: http://sourceforge.net/p/icewm/bugs/911/

PR:		196034 [1]
Submitted by:	Ronald Klop <ronald-lists@klop.ws> [1]

Add DOCS option to the remaining staged ports where PORTDOCS appears
in the plist.

- Update to 1.3.8
- Convert to USES
- Stage support

PR:		186738
Submitted by:	ports fury

Return some ports I maintain to the pool.

Remove PORT_OPTIONS:MDOCS checks from ports which don't need it
Add NO_ARCH if useful

Fix icewm's buggy use of iconv which causes it to fail on 10.x.

PR:		ports/182307
Submitted by:	Wolfgang Zenker <wolfgang@lyxys.ka.sub.org> (incl. patch and
testing)
PR:		ports/183626
Submitted by:	Pavlo Greenberg <dog@virtual.org.ua>

- Convert to staging

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

Remove now excess verbiage.

Reviewed by:	bapt

Convert from USE_GMAKE to USES=gmake

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Add port's license

Convert to USES=gettext

Reviewed by:	kwm

Clean up my ports (and a couple of ports@ owned ones):

- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.

Reviewed by:	drogoh (on irc)

- Fix build with clang [1]
- Pet portlint by removing excess whitespace

PR:		ports/175467 [1]
Reported by:	Pavel Timofeev <timp87@gmail.com> [1]
Approved by:	eadler (maintainer, implicit)
Obtained from:	Upstream CVS [1]

Convert to OptionsNG

Feature safe: yes

Trim the headers in the ports I maintain.

Upgrade to OptionsNG

Reviewed by:    dinoex, ak

- update png to 1.5.10

Remove gratitutous version number from LIB_DEPENDS where not required.

Add file I forgot to add in the last commit

- Enable XINERAMA by default - it has no extra depends
- Enable Beastie by default - daemon > no daemon
- Add a LITE option - untested
- Include MenuIconSize not yet upstreamed

PR:             ports/164386
Submitted by:   Gabor Fischer <Gabor.Fischer@gmx.net>

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Fix build issues with GNOME

PR:             159237
Submitted by:   maintainer

My mistake. Previous commit backed out due to maintainers request.

Pointy hat to:  yours truly

Mark BROKEN when GNOMEDESKTOP is selected.

Assume maintainership.

- fix path to html documentation

Use a diffent fix as the one suggested by the maintainer in the PR.

PR:             ports/156573
Approved by:    eadler (maintainer)

- Update to 1.3.7

PR:             ports/151904
Submitted by:   Eitan Adler <ports@eitanadler.com> (maintainer)

- Update maintainer's email address

PR:             ports/148497
Submitted by:   Eitan Adler <eitanadlerlist@gmail.com> (maintainer)

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Add ACPI support for FreeBSD
- Bump PORTREVISION

PR:             ports/138489
Submitted by:   mav
Approved by:    maintainer implicit

- Switch SourceForge ports to the new File Release System: categories starting
with X

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Remove excessive @dirrmtrys

PR:             ports/132794
Submitted by:   Eitan Adler <EitanAdlerList AT gmail.com> (maintainer)
Approved by:    miwi (mentor)

- Remove excessive @dirrmtrys.

- Update to version 1.2.37.
- Disable Xinerama option by default.

PR:             ports/132255
Submitted by:   Eitan Adler <eitanadlerlist@gmail.com>

Assign MAINTAINER to submitter.

PR:             ports/132240
Submitted by:   eitanadlerlist at gmail dot com

- Drop maintainership of the following ports:

games/darkplaces
games/quake-dpmod
games/edge
games/deng
games/odamex
games/uhexen2
games/uhexen2-extras
games/vavoom
games/vavoom-extras
games/alienarena
games/alienarena-data
games/freedroidrpg
games/assaultcube