20:00 Emmanuel Vadot (manu) 

x11/libxcb: Update to 1.17.0

Release notes:	https://lists.x.org/archives/xorg-announce/2024-April/003507.html

Differential Revision:	https://reviews.freebsd.org/D44804
Reviewed by:		bapt
Sponsored by:		Beckhoff Automation GmbH & Co. KG

    7b6a5c7e

06:55 Emmanuel Vadot (manu) 

x11/libxcb: Update to 1.16.1

Release notes:	https://lists.x.org/archives/xorg-announce/2024-March/003464.html

Sponsored by:	Beckhoff Automation GmbH & Co. KG

    16a4719

21:51 Muhammad Moinur Rahman (bofh) 

x11/libxcb: Impelled to share/man

Approved by:    portmgr (blanket)

    75e1b55

17:29 Jan Beich (jbeich) 

x11/libxcb: drop libpthread-stubs dependency

Switch from libpthread to pthread stubs in libc. This is how
libpthread-stubs was supposed to work before it became useless.

PR:		269462
Exp-run by:	antoine
Approved by:	manu

    a387409

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:23 Tobias C. Berner (tcberner) 

x11: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexander Matey <matey@cis.ohio-state.edu>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Alexey Mikhailov <karma@ez.pereslavl.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Toernqvist <antont@inbox.lv>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Ashish Shukla <wahjava@gmail.com>
  *  Ben Woods <woodsb02@FreeBSD.org>
  *  Bert Burgemeister <trebbu@googlemail.com>
  *  Bruce A. Mah <bmah@ca.sandia.gov>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Chris Hutchinson <portmaster@BSDforge.com>
  *  Cy SChubert <cy@FreeBSD.org>
  *  Cy Schubert <Cy.Schubert@uumail.gov.bc.ca>
  *  Cy Schubert <cy@FreeBSD.org>
  *  DaJoob
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Daniel Walter <sahne@0x90.at>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Grochowski
  *  David Mackay <davidjx8p@gmail.com>
  *  David Yeske <dyeske@gmail.com>
  *  Dejan Lesjak <lesi@FreeBSD.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitri Goutnik <dg@syrec.org>
  *  Dominik Rothert <dr@domix.de>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Eric Blood <eblood@cs.unr.edu>
  *  Eric L. Hernes <erich@rrnet.com>
  *  Eric Turgeon <ericbsd@FreeBSD.org>
  *  Eric Turgeon <ericturgeon.bsd@gmail.com>
  *  Evgeni Dimitrov <evgeni.dimitrov@gmail.com>
  *  FURUSAWA,Kazuhisa <kazu@jp.freebsd.org>
  *  Florent Thoumie <flz@xbsd.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Francis Bacque <idroxid01@yahoo.fr>
  *  Franz Klammer <klammer@webonaut.com>
  *  Gerrit Beine <tux@pinguru.net>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hendrik Scholz <hendrik@scholz.net>
  *  Jacob House <jacob@jwfh.ca>
  *  James Earl <jdearl@telus.net>
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeroen Schot <schot@a-eskwadraat.nl>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Julien Laffaye <kimelto@gmail.com>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Ken Moore <ken@pcbsd.org>
  *  Koop Mast <einekoai@chello.nl>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lin, Cheng-Tao <b89605222@ntu.edu.tw>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Matt Lancereau
  *  Matt Lancereau <matt@rimasec.net>
  *  Matt Peterson <matt@peterson.org>
  *  Matthew Donovan <kitchetech@gmail.com>
  *  Matthew Fuller <fullermd@futuresouth.com>
  *  Matthew Hunt <mph@pobox.com>
  *  Matthew West <mwest@uct.ac.za>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michiel Overtoom <motoom@xs4all.nl>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Morten Slot Kristensen
  *  Murray Stokely <murray@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nikos Ntarmos <ntarmos@ceid.upatras.gr>
  *  Nikos Ntarmos <ntarmos@cs.uoi.gr>
  *  Oleg Pudeyev <oleg@bsdpower.com>
  *  Oliver Breuninger <ob@breuninger.org>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Patrick Li <pat@databits.net>
  *  Pawel Worach <pawel.worach@gmail.com>
  *  Pedro Giffuni
  *  Per Otterstr=F6m <pelle@fukt.bth.se>
  *  Petr Holub <hopet@ics.muni.cz>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Roman Bogorodskiy <novel@FreeBSD.org>
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Sakai Hiroaki <sakai@seki.ee.kagu.sut.ac.jp>
  *  Samy Al Bahra <samy@kerneled.org>
  *  Samy Al Bahra <sbahra@kerneled.org>
  *  Sascha Holzleiter <sascha@root-login.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA
  *  Scott Mace <smace@FreeBSD.org>
  *  Sean Farley <sean-freebsd@farley.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Serge Gagnon <gagnon__s@videotron.ca>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sofian Brabez <sbz@FreeBSD.org>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stepan Zastupov [RedChrom] <redchrom@gmail.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stijn Hoop <stijn@win.tue.nl>
  *  Tatsumi Hosokawa
  *  Theron Tarigo <theron.tarigo@gmail.com>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Hurst <tom@hur.st>
  *  Tim Bishop <tim@bishnet.net>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Roth <ports@fsck.ch>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Vincent Tantardini <vinc@freebsd-fr.org>
  *  Volker Stolz <stolz@i2.informatik.rwth-aachen.de>
  *  Winston Weinert <winstonw@lavabit.com>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Zane C. Bowers
  *  Zhihao Yuan <lichray@gmail.com>
  *  asami
  *  chinsan
  *  dirk.meyer@dinoex.sub.org
  *  dom@myrddin.demon.co.uk
  *  eimar.koort
  *  gpalmer
  *  gpalmer@FreeBSD.org
  *  grog
  *  gurkan@phys.ethz.ch
  *  hemi@puresimplicity.net
  *  ijliao
  *  incabulos@mac.com
  *  jacs
  *  janek
  *  jhb
  *  jkh
  *  jkh@FreeBSD.org
  *  jmz
  *  joerg
  *  johalun0@gmail.com
  *  jonny
  *  jsellens
  *  krion
  *  matt@bdd.net
  *  michael johnson <ahze@ahze.net>
  *  nkazushi@highway.or.jp
  *  od <od@iclub.nsu.ru>
  *  oleg@bsdpower.com
  *  roam@FreeBSD.org
  *  trevor
  *  will

With hat:	portmgr

    d357bca

08:35 Baptiste Daroussin (bapt) 

x11/libxcb: update to 1.15

While here drop the python category, libxcb has nothing to do with
python

    546a889

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

17:35 zeising 

x11/libxcb: Re-add runtime dependency on pthread-stubs

Re-add the runtime dependency on pthread-stubs, that was dropped in the
update to 1.14.  Things linking against libxcb needs it as well, and since
it was pulled in from here, keep doing that.

In the future, the dependency on pthread-stubs mabye should be moved to the
ports that actually need it, but keep the status quo for now.

 

17:00 zeising 

x11/libxcb: Update to 1.14

Update x11/libxcb to 1.14.
Clean up the makefile:
* Remove the dependency on check and libxslt, they are only needed for tests
  which aren't built and installed anyway.
* No need to use gmake
* Correct configure options
* Have libxcb use pkgconfig to figure out cflags and ldflags, instead of
  hardcoding some cflags and ldflags in the Makefile.

 

21:56 zeising 

Switch all ports to use USES=xorg-cat

Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports

 

14:14 zeising 

Switch a couple of x11 ports to https

Switch over a couple of x11 ports, that doesn't use the common xorg master
sites, to use https instead of http.

PR:		239094
Submitted by:	Miyashita Touka

 

19:47 zeising 

x11/libxcb: Update to 1.13.1

This fixes an issue with intermittent KWin craches when using the nvidia
driver.

While here, add gnome to USES=

Release notes:
https://lists.freedesktop.org/archives/xcb/2018-September/011155.html

 

18:59 zeising 

Update x11/libxcb and x11/xcb-proto to 1.13

Remove patches from upstream included in the releases.

Tested by: Pete Wright

 

09:25 antoine 

Fix previous commit

 

09:01 antoine 

Simplify some USES=python

With hat:	portmgr

 

20:05 rezny 

Revert previous; in this one case there is a runtime dependency on
pthread-stubs.pc because it is referenced in xcb.pc, which would be
better handled as part of USE_XORG=xcb, but a quick fix is required.

PR:		218015
Approved by:	feld (mentor)

 

13:46 rezny 

Remove the no longer valid RUN_DEPENDS on libpthread-stubs

PR:		218015
Reported by:	freebsd@charles.lecklider.org
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10182

 

11:14 sunpoet 

Move devel/libcheck to devel/check

- Bump PORTREVISION for dependent ports

 

09:36 rm 

x11/libxcb: fix build with python3

Add upstream patches to fix build/packaging with python3 as default after
the recent update. python3 is not default, so no PORTREVISION bump is required.

PR:		214281
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	portmgr (just-fix-it blanket)

 

19:06 bapt 

Update to 1.12

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

13:49 kwm 

Update xkbevd to 1.1.4.

Obtained from:	Xorg devel repo

 

22:14 rm 

Allow build libxcb and xcb-proto with python3

Since version 1.11 libxcb successfully builds with pytnon3, so we don't
need to limit python version anymore.

PR:		194748 194749
Submitted by:	rm (myself)
Approved by:	maintainer timeout (6 months+)

 

15:34 kwm 

Misc X.org port updates:

Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.

Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
  all affected ports.

PR:		199400
Obtained from:	Xorg-devel repo

 

11:02 robak 

x11/libxcb: add CPE information

- Maintainer's timeout (x11@FreeBSD.org)

PR:		197724
Submitted by:	Shun <shun.fbsd.pr@dropcut.net>

 

14:44 kwm 

Update the following Xorg components:

libXext to 1.3.3
libxcb and xcb-proto to 1.11
libxkbcommon to 0.5.0
pixman to 0.32.6
xinit to 1.3.4
xkeyboard-config to 2.13
xrandr to 1.4.3
xtrans to 1.3.5

Use INSTALL_TARGET=install-strip for stripping.
Drop @dirrm[try] from plist

Obtained from: xorg-dev repo

 

18:16 mva 

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

 

03:34 adamw 

Add DOCS option to the remaining staged ports where PORTDOCS appears
in the plist.

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

10:16 zeising 

Restrict these to use python 2 for the time being.

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

11:11 zeising 

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

 

16:06 kwm 

Enable xkb support. [1]
Stageify.

Requested by:	makc@ [1]
Obtained from:	xorg-dev

 

17:01 zeising 

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first.  See UPDATING for details.

PR:		ports/181962 [2]
Submitted by:	marius [1]
		zeising [2]
Exp-run by:	bdrewery
Approved by:	portmgr (bdrewery)

Thanks to all who helped testing!

 

23:43 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)

 

11:56 bapt 

Add an explicit dependency on pkgconfig

Reported by:	antoine

 

19:31 zeising 

Fix security issues in xorg client libraries.
Most libraries were updated to newer versions, in some cases patches
were backported instead.

Most notably, x11/libX11 was updated to 1.6.0

Security:	CVE-2013-1981
		CVE-2013-1982
		CVE-2013-1983
		CVE-2013-1984
		CVE-2013-1985
		CVE-2013-1986
		CVE-2013-1987
		CVE-2013-1988
		CVE-2013-1989
		CVE-2013-1990
		CVE-2013-1991
		CVE-2013-1992
		CVE-2013-1993
		CVE-2013-1994
		CVE-2013-1995
		CVE-2013-1996
		CVE-2013-1997
		CVE-2013-1998
		CVE-2013-1999
		CVE-2013-2000
		CVE-2013-2001
		CVE-2013-2002
		CVE-2013-2003
		CVE-2013-2004
		CVE-2013-2005
		CVE-2013-2062
		CVE-2013-2063
		CVE-2013-2064
		CVE-2013-2066

 

14:37 zeising 

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

 

13:04 eadler 

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

 

17:03 miwi 

- Please welcome Xorg 7.5.2

       The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

15:26 miwi 

- Remove WITH_FBSD10_FIX, is no longer needed

18:26 miwi 

- Fix build on FreeBSD 10

02:02 eadler 

- remove outdated warning
- hand maintainership to x11@

Reviewed by:    kwm
Approved by:    ashish (maintainer)
Approved by:    bapt,sahil (mentors, implicit)

05:25 ashish 

- Exclude Python 3.x from USE_PYTHON_BUILD as it fails to build with Python 3.x

PR:             ports/154882
Submitted by:   sunpoet
Approved by:    pgj (mentor, implicit)

06:46 ashish 

- Update to 1.7
- Add LICENSE

Approved by:    tabthorpe (mentor)

13:37 ashish 

- Change my maintainer address.

Approved by:       pgj (mentor)

06:28 wen 

- Update to 1.6

PR:             ports/146456
Submitted by:   Ashish SHUKLA <wahjava@gmail.com> (maintainer)

23:32 pav 

- Update to 1.5

PR:             ports/141225
Submitted by:   Ashish SHUKLA <wahjava@gmail.com> (maintainer)

20:20 amdmi3 

- Add dependency on x11/xcb-proto >= 1.5, this does not build with earlier
versions

PR:             137298
Submitted by:   Ashish SHUKLA <wahjava@gmail.com> (maintainer)

15:17 amdmi3 

- Update to 1.4

PR:             137231
Submitted by:   Ashish SHUKLA <wahjava@gmail.com> (maintainer)

12:52 gahr 

- Enable installation of tutorial

PR:             136055
Submitted by:   gahr
Approved by:    Ashish Shukla <wahjava@gmail.com> (maintainer)

22:22 dhn 

- Update to 1.3

PR:             ports/135430
Submitted by:   Ashish SHUKLA <wahjava@gmail.com> (maintainer)

18:49 rnoland 

Add patch to fix xauth.

PR:             131120
Submitted by:   Danny Braniss <danny@cs.huji.ac.il>
Approved by:    Ashish SHUKLA <wahjava@gmail.com> (maintainer)

20:11 rnoland 

Update xcb-proto to 1.4, libxcb to 1.2 and libX11 to 1.2

forced commit to fix commit message from last commit.

Approved by:    wahjava@gmail.com (xcb maintainer for xcb bits)

19:56 rnoland 

/tmp/cvsGePDN8

16:28 flz 

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

22:02 rnoland 

allow x11/libxcb and x11/xcb-proto to build with python 2.5+

PR:             130475
Submitted by:   Joseph S. Atkinson
Approved by:    wahjava@gmail.com (maintainer), garga (mentor, implicit)

22:20 miwi 

- Update to 1.1.90.1

PR:             126990
Submitted by:   bf <bf2006a@yahoo.com>
Approved by:    maintainer

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

13:07 edwin 

${.CURDIR}/pkg-message -> ${PKGMESSAGE}
Noticed by: flz@

PR:             ports/123966
Submitted by:   Anatoly Borodin <anatoly.borodin@gmail.com>

12:30 edwin 

x11/libxcb: message isn't shown sometimes

        When installing x11/libxcb pkg-message may not be shown if
        /usr/obj is used and /usr/obj/usr/ports/x11/libxcb dir
        exist.

PR:             ports/123966
Submitted by:   Anatoly Borodin <anatoly.borodin@gmail.com>

14:23 itetcu 

Update to 1.1:
"This release requires xcb-proto 1.1, due to the addition of the
extension-multiword attribute to the XML schema.

Enhancements:
* Print a backtrace, if possible, on locking assertion failures.
* Skip abort() on locking assertions if LIBXCB_ALLOW_SLOPPY_LOCK is set.
* xcb_poll_for_event: Return already-read events before reading again.
* Output a configuration summary at the end of ./configure.

Bug fixes:
* Don't hold the xlib-xcb lock while sleeping: that allows deadlock.
* Allow unix:<screen> style display names again.
* Bug #9119: test xcb_popcount
* Fix unit tests for FreeBSD
* NetBSD doesn't have AI_ADDRCONFIG: use it only if it's available.
* Require libXau >= 0.99.2; earlier versions have a broken .pc file
* Use substitition variables in xcb-xinerama.pc.in
* Update autogen.sh to one that does objdir != srcdir
* Add tools/* and autogen.sh to EXTRA_DIST.
* Doxygen can now be fully disabled if desired.

Documentation improvements:
* Many fixes and updates to the tutorial.
* Iterators, requests, and replies get partial Doxygen documentation."

PR:             ports/122564
Submitted by:   bf <bf2006a@yahoo.com>
Approved by:    maintainer

14:45 beech 

- Remove doxygen docs build.

Reported by:    pointyhat via pav
Approved by:    Ashish Shukla <wahjava@gmail.com> (maintainer),
                sat (mentor)

06:11 beech 

- Fix pkg-plist
- Remove 4.x cruft
- Makefile tweaks

PR:             ports/113705
Submitted by:   Ashish Shukla <wahjava@gmail.com> (maintainer)
Approved by:    maintainer, sat (mentor)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

22:41 miwi 

- Unbreak index
- Bump PORTREVISION

PR:             108629
Submitted by:   Drew Derbyshire <ahd@kew.com>
Approved by:     Ashish Shukla <wahjava@gmail.com> (maintainer)

11:18 miwi 

- Update to 1.0

PR:             108494
Submitted by:   Ashish Shukla<wahjava@gmail.com> (maintainer)

15:49 alepulver 

- Fix building on 4.x.

Reported by:    pointyhat

16:14 alepulver 

The X protocol C-language Binding (XCB) is a replacement for Xlib
featuring a small footprint, latency hiding, direct access to the
protocol, improved threading support, and extensibility.

WWW: http://xcb.freedesktop.org/

- Ashish Shukla
wahjava@gmail.com

PR:             ports/102447
Submitted by:   Ashish Shukla <wahjava at gmail.com>