| non port: x11/qimageblitz/Makefile |
|
SVNWeb
|
Number of commits found: 30 |
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias)  ]    ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above.  )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] d357bca (Only the first 10 of 288 ports in this commit are shown above. )
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexander Matey <matey@cis.ohio-state.edu>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Anton Toernqvist <antont@inbox.lv> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 19 Jul 2022
|
[ 00:46 Yuri Victorovich (yuri) ] a51002e
x11/qimageblitz: Update to rev.1548172
Reported by: fluffy@
|
|
Sun, 17 Jul 2022
|
[ 21:18 Yuri Victorovich (yuri) ] dfa5a40
x11/qimageblitz: Change fetch from svnlite to subversion
svnlite is discontinued.
Reported by: fluffy@
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 23 Apr 2019
|
[ 06:11 yuri ]
x11/qimageblitz: fix build with GCC-based architectures
PR: 237484
Submitted by: pkubaj
|
|
Sat, 13 Apr 2019
|
[ 17:31 yuri ]
x11/qimageblitz: Change maintainer kde->yuri; Replace svn -> svnlite
I agree that this is an unmaintained software.
I explained this to the upstream depevloper of the softwatre package that uses
it.
If/once they will remove the dependency, this port should be removed again.
Reported by: mat (svn)
Suggested by: adridg (maintainer)
|
[ 05:32 yuri ]
Re-add x11/qimageblitz: Graphical effects and filters library, part of
kdesupport
The older version of this port has been recently removed because it was
Qt4-only.
As it turned out, it is used by some software packages, and the latest revision
supports Qt5.
It is also a part of the collection 'kdesupport', see
https://launchpad.net/kdesupport
Followed the advice of Adriaan de Groot <groot@kde.org> to use PORTVERSION=0.1.0
|
|
Sun, 2 Dec 2018
|
[ 15:41 rene ] (Only the first 10 of 464 ports in this commit are shown above. )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Sat, 6 Jan 2018
|
[ 18:48 tcberner ]
x11/qimageblitz, fix build with clang6
PR: 224945
Reported by: jbeich
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 29 Jul 2014
|
[ 18:41 adamw ] (Only the first 10 of 426 ports in this commit are shown above. )
Convert a bunch of USE_BZIP2 to USES=tar:bzip2
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Wed, 6 Nov 2013
|
[ 14:53 rakuco ]
Support staging.
Submitted by: Schaich Alonso <alonsoschaich@fastmail.fm>
|
|
Fri, 20 Sep 2013
|
[ 23:43 bapt ] (Only the first 10 of 483 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)
|
|
Tue, 2 Jul 2013
|
[ 17:06 rakuco ]
Directly depend on qt4-corelib.
Original commit by makc@ in the area51 repository.
|
|
Fri, 22 Mar 2013
|
[ 20:06 makc ] (Only the first 10 of 464 ports in this commit are shown above. )
- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
for users
Approved by: portmgr (miwi)
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Wed, 1 Sep 2010
|
[ 21:25 makc ]
Update to 0.0.6
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 27 Nov 2009
|
[ 01:44 miwi ] (Only the first 10 of 265 ports in this commit are shown above. )
The KDE FreeBSD team is proud to announce the release of KDE 4.3.3
for FreeBSD.
For lists of bugfixes and improvements please see:
http://www.kde.org/announcements/changelogs/changelog4_3_1to4_3_2.php
http://www.kde.org/announcements/changelogs/changelog4_3_2to4_3_3.php
The KDE FreeBSD team would like to say thanks to all the helpers
and submitters.
Tested by: pointyhat-exp-run (myself)
|
|
Sat, 22 Aug 2009
|
[ 00:39 amdmi3 ] (Only the first 10 of 148 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with X
|
|
Mon, 10 Aug 2009
|
[ 11:47 makc ] (Only the first 10 of 66 ports in this commit are shown above. )
Mk/bsd.kde4.mk:
- rework KDE4_BUILDENV
All ports:
- remove needless post-extract target
- make patches relative to ${PATCH_WRKSRC}
- clean up
- bump PORTREVISION when required
databases/akonadi:
- replace dependency on boost-python-libs with boost-libs
(finally, boost-pyhton does not conflict with boost \o/)
deskutils/kdepim*:
- replace boost-python-libs with boost-libs(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 24 Mar 2009
|
[ 19:13 makc ] (Only the first 10 of 131 ports in this commit are shown above. )
bump PORTREVISION after cmake update
|
|
Fri, 30 Jan 2009
|
[ 19:25 miwi ]
- Update to 2.6.2
- Remove CMAKE_BUILD_TYPE [1]
CMAKE_BUILD_TYPE only affects compiler FLAGS and linking with specific
library versions (debug |optimized | general).
In our case external libraries reside in other ports and only install
one version (no separate debug/optimized). Also, the ports system
provide correct compiler flags (-g and no optimizations when WITH_DEBUG
is used). Thus, cmake buildtypes only add extra compiler flags. Ports will
be built correctly both by default and for WITH_DEBUG case.
- Also, change WRKSRC to CONFIGURE_WRKSRC. (use CONFIGURE_WRKSRC for configure
target instead of WRKSRC)
PR: 126507 [1]
Submitted by: amdmi3@ [1]
Tested with: exp-run
Thanks to: pav/amdmi3
|
|
Tue, 13 Jan 2009
|
[ 23:16 makc ] (Only the first 10 of 201 ports in this commit are shown above. )
kde@freebsd team is pleased to announce KDE 4.1.4, the last bugfix release in
4.1.x series.
You have only two weeks to play with it -- KDE 4.2.0 is coming ;)
Great thanks for those who helped us with testing 4.1.2 and 4.1.3 during
long-long ports ice-age.
For lists of bugfixes and improvements please see:
http://www.kde.org/announcements/changelogs/changelog4_1_1to4_1_2.php
http://www.kde.org/announcements/changelogs/changelog4_1_2to4_1_3.php
http://www.kde.org/announcements/changelogs/changelog4_1_3to4_1_4.php
Approved by: miwi (mentor)
|
|
Sat, 9 Aug 2008
|
[ 16:52 miwi ] (Only the first 10 of 422 ports in this commit are shown above. )
The KDE FreeBSD team is proud to announce the release of KDE 4.1.0
for FreeBSD. The official KDE 4.1.0 release notes can be found at
http://www.kde.org/announcements/4.1/.
Some note:
* Prefix
KDE4 will be install into a custom prefixes namely ${LOCALBASE}/kde4.
KDE4 and KDE3 can co-exist
* Sound
For sound to work, it is necessary to have dbus and hal enabled
in your system. Please see the respective documentation on how
to enable these.
For more Informations see the HEADS UP at ports@ and kde-freebsd@
or our wiki page http://wiki.freebsd.org/KDE4/Install.
Have fun!
|
Number of commits found: 30 |
As an Amazon Associate I earn from qualifying purchases.