x11/xbindkeys: Moved man to share/man

Approved by:    portmgr (blanket)

*/*: adapt to new guile framework

 - change all ports using guile to USES=guile
 - flavorize guile-lib, guile-cairo, slib-guile

PR:		260960
Reported by:	Martin Neubauer <m.ne@gmx.net>
Approved by:	bofh
Differential Revision:	https://reviews.freebsd.org/D40194

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexander Matey <matey@cis.ohio-state.edu>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Alexey Mikhailov <karma@ez.pereslavl.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Toernqvist <antont@inbox.lv>

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

- Pass maintainership to submitter
- While here, minor cleanup
  - Clarify LICENSE
  - Add LICENSE_FILE
  - Remove unneeded flags
  - Don't needlessly and erroneously patch wish path when TCL is disabled and
${WISH} is not defined
  - Silence mkdir

PR:		209705
Submitted by:	guru@unixarea.de

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Do not require a particular version of Tk - any will do [1]
- While at it, modernize OPTIONS

PR:		194868
Submitted by:	wbparsons@alum.mit.edu

Hand back my ports to the pool.

Ports require time and TLC which I no longer have.

lang/guile:
- Add USES=libtool and bump dependent ports
- Replace Makefile.* patches with USES=pathfix
- Replace config.h.in patch with USE_AUTOTOOLS=autoheader
- Avoid automake by touching Makefile.in

Approved by:	portmgr (implicit, bump unstaged port)

Fix some non default LIB_DEPENDS

With hat:	portmgr

Update to 1.8.6

Unquiet my ports to make debugging easier.

- Convert to staging

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)

Remove now excess verbiage.

Reviewed by:	bapt

Prefer the more common option 'TCL' for scripting support and use the global
description

Update to 1.8.5

	- Change master sites
	- Add license
	- Trim pkg-descr
	- Update WWW

Submitted by:	nemysis <nemysis@gmx.ch>
Feature safe:	yes

Clean up my ports (and a couple of ports@ owned ones):

- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.

Reviewed by:	drogoh (on irc)

Trim the headers in the ports I maintain.

Upgrade to OptionsNG

Remove gratitutous version number from LIB_DEPENDS where not required.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Chase guile shared lib bump
- Add an entry to UPDATING

- Get Rid MD5 support

- Update maintainer's email address

PR:             ports/148497
Submitted by:   Eitan Adler <eitanadlerlist@gmail.com> (maintainer)

- Pass maintainership to Eitan Adler.

Submitted by:   Eitan Adler <EitanAdlerList@gmail.com> (via private mail)
Feature safe:   yes

- Update 1.8.3.

- Chase lang/guile shlib bump

- Chase lang/guile share library version bump (.18 -> .19)
- Bump PORTREVISION

PR:             ports/125435

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Chase libguile shared lib version.

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Change my mail address to araujo@.

Approved by:    stas (mentor)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.8.2

PR:             111879
Submitted by:   miwi
Approved by:    maintainer

Update to 1.8.1

PR:             ports/111610
Submitted by:   Marcelo Araujo (araujo@bsdmail.org) (maintainer)

- update version to 1.8.0
- pass maintainership to submitter

PR:             ports/108551
Submitted by:   Marcelo Araujo

- Update to 1.7.4

PR:             ports/107637
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 1.7.3

PR:             98121
Submitted by:   Martin Wilke <freebsd_AT_unixfreunde dot de>

Remove USE_REINPLACE from categories starting with X

- Add SHA256

- Update to 1.7.2 [1]
- Refactor pkg-plist as PLIST_{FILES|DIRS}
- Install the example regardless of NOPORTDOCS

PR:             ports/80772 [1]
Submitted by:   KATO Tsuguru <tkato432@yahoo.com> [1]

- Convert to OPTIONS

PR:             ports/70717
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>

SIZEify.

- Update to version 1.7.1

PR:             61251
Submitted by:   Ports Fury

upgrade to 1.7.0

Update to version 1.6.5.

PR:             58383
Submitted by:   Ports Fury

upgrade to 1.6.4

De-pkg-comment.

Use CONFIGURE_TARGET instead of CONFIGURE_ENV.

PR:             ports/45450
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Upgrade to 1.6.3.

Upgrade to 1.6.2.

Upgrade to 1.6.0.

Changed MD5 sum. Developer has just changed some lines in configure.in and
rerunned auto{configure|make|...}. No functionality has changed, so no need to
bump PORTREVISION.

PR:             44210
Submitted by:   Volker Stolz <vs@foldr.org>

- Support CFLAGS/CXXFLAGS properly
- ECHO -> ECHO_MSG

PR:             42894
Submitted by:   Ports Fury

Set maintainership to ports@.

Change MAINTAINER to my FreeBSD address.

Approved by:    dwcjr (mentor)

Fix script environment when WITH_GUI is defined.

PR:             38320
Submitted by:   parv <parv@pair.com>, maintainer

Upgrade to 1.5.5.

PR:             ports/38239
Submitted by:   maintainer

Update to 1.5.4

PR:             38066
Submitted by:   maintainer

Update to 1.5.2

PR:             37815
Submitted by:   maintainer

Update to 1.5.1

PR:             37499
Submitted by:   maintainer

Update to 1.5.0

PR:             36534
Submitted by:   maintainer

* added knob WITH_GUI
* added scripts/post-install
* bumped PORTREVISION, because xbindkeys_show does not work prior to
  these changes

PR:             36366
Submitted by:   maintainer

Pass maintainership to the submitter.

PR:             36348
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Update to 1.4.1    

upgrade to 1.4.0    

Update to 1.3.0    

upgrade to 1.2.2    

Update to 1.2.1    

upgrade to 1.2.0    

Fix typo s/WITH_XLIB/USE_XLIB/    

add xbindkeys 1.0.1   Allows you to launch shell commands under X with your
keyboard