astro/libnova: mark as PIE_UNSAFE (+)

Reported by:	bulk -t

Approved by:	portmgr (blanket)

Sponsored by:	Future Crew, LLC

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

astro: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp>
  *  Alexander Leidinger
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Karpov <toxa@toxahost.ru>
  *  Brion Moss <brion@queeg.com>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Chris Piazza <cpiazza@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

astro/libnova: Add LICENSE/LICENSE_FILE

Approved by:	portmgr blanket

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Remove useless WRKSRC definitions.

While there, correct DEV_WARNINGS when they occur.

Sponsored by:	Absolight

Reset dhn's ports

PR:		197522
Submitted by:	jbeich
Approved by:	portmgr

Convert to USES=autoreconf
Strip binaries

Cleanup plist

Use default LIBTOOLIZE_ARGS

Convert to USES=libtool.
Unfortunately the libtool scripts in this port come from different
versions so libtoolize (and all other autotools) has to be run.

- Remove NO_STAGE as these have been tested to be safe

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
astro)

- Update to 0.15.0

- Update to 0.14.0

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Sync to new bsd.autotools.mk

- Switch SourceForge ports to the new File Release System: categories starting
with A

- Update to 0.13.0

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Use my FreeBSD address on the ports I maintain

Approved by:    tabthorpe (co-mentor)

- Update to 0.12.3

PR:             130556
Submitted by:   Dennis Herrmann <adox at mcx2 dot org>

- Remove conditional checks relevant only on FreeBSD 5.x and older

- Pass maintainership to PR submitter

PR:             ports/129888
Submitted by:   Dennis Herrmann <adox@mcx2.org>

- Update to 0.12.2

Reset quakelee@cn.FreeBSD.org due to maintainer-timeouts and no response
to email.

Hat:    portmgr

Pass maintainership to last submitter.

- Updated to 0.12.1

PR:             ports/109005
Submitted by:   CHAO Shin <quakelee at cn.freebsd.org>
Approved by:    alexbl (mentor, implicit)

Use libtool port instead of included version to avoid objformat a.out botch

Update to 0.12.0.

Submitted by:   Frank W. Josellis <frank dynamical-systems org>
PR:             ports/102119

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include astro/ audio/ biology/ chinese/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Change nan("chars") to strtod("NAN(chars)", NULL) and remove dependency of gcc
3.3
- Bump PORTREVISION
- portlint(1)

PR:             93520
Submitted by:   Frank W. Josellis <frank@dynamical-systems.org>

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

nan() is a gcc 3.3-ism, therefor require GCC 3.3 for this port.

Upgrade to 0.11.0

don't install .la files

change the libtool version to use from 1.3 to 1.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add SIZE.

- Support CFLAGS properly

PR:             ports/61950
Submitted by:   Ports Fury

- Update to version 0.9.0

Update to 0.8.0

Approved by:    fjoe (mentor) (implicit)

Update to 0.7

PR:             51542
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org>

De-pkg-comment.

Update to 0.6.0.

PR:             ports/47748
Submitted by:   Ports Fury

Update to 0.5.1

PR:             47485
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Fix build on -current (remove <malloc.h>)

add libnova 0.5.0
Astronomical Calculation Library