libao is a cross-platform audio library that allows programs to
output audio using a simple API on a wide variety of platforms.
On FreeBSD, it currently supports:
* null output
* raw output
* AU files
* WAV files
* OSS (Open Sound System)
And optionally:
* NAS (Network Audio System)
* PulseAudio
* Sndio
===> The following configuration options are available for libao-1.2.0_7:
DOCS=on: Build and/or install documentation
NAS=off: Network Audio System support
PULSEAUDIO=off: PulseAudio sound server support
SNDIO=off: Sndio audio support
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com>
(Only the first 15 lines of the commit message are shown above )
*/*: Add a backup master site to all Xiph.org ports
The downloads.xiph.org master site requires TLS1.3, which is not
supported by FreeBSD 11's OpenSSL and fetch(1). Add ftp.osuosl.org
as a backup to all Xiph.org ports.
PR: 256515
Reported by: Daniel Engberg
Enable sndio support in libao, based on the OpenBSD port.
Also add --disable-alsa to CONFIGURE_ARGS because without it the
port tries to link with libasound when it's installed.
PR: 211662
Submitted by: Tobias Kortkamp <t@tobik.me>
Bump PORTREVISION to have the port rebuilt after the GDBM upgrade.
This affects configurations using the PULSEAUDIO option only.
Approved by: naddy@ (maintainer)
PR: ports/161084
Update to 1.0.0. Improvements in this release:
* Added surround channel mapping API and capability
* New config file options
* Driver options may be specified in config file
* Workaround for ESD non-4096 byte write bug
* Workaround aRts server crash bug
* Numerous patches from multiple downstreams
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
(Only the first 15 lines of the commit message are shown above )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
* Maintenance update to 0.8.4.
* Support for the aRts plugin now must be explicitly enabled by
defining WITH_ARTS.
* NAS plugin available by defining WITH_NAS. Consider experimental.
Update libao to 0.8.0, which breaks mpg321. Update libogg, libvorbis,
vorbis-tools and the vorbis meta-port to 1.0rc2. This version supports
"channel coupling" for more efficient compression of stereo material.
o update to 1.0 RC1. PORTEPOCH bumped due to PKGNAME now strictly follows
handbook. (1.0b4,1 > 1.0.r1,1 vs. 1.0b4,1 < 1.0.r1,2) o support
NOPORTDOCS. o remove stale MASTER_SITES.
Change maintainer for libao, libogg, libvorbis, and vorbis. Improve use of
autoconf and automake. Support NOPORTDOCS. Respect CFLAGS. Fix libvorbis
encoder on Alpha. Install documentation in proper places.
Add AUTO{CONF,MAKE}_{ENV,ARGS}. Among other things, this will fix
audio/libao, audio/libogg, audio/libvorbis and audio/vorbis-tools which need
--add-missing to be passed to automake.
