Ogg is a multimedia container format and the native file and stream
format for the Xiph.org multimedia codecs. It encapsulates raw
compressed data and allows the interleaving of audio and video data
inside a single convenient format. Ogg is a stream oriented container
and provides packet framing, error detection, and periodic timestamps
for seeking.
===> The following configuration options are available for libogg-1.3.6,4:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com>
(Only the first 15 lines of the commit message are shown above )
*/*: Add a backup master site to all Xiph.org ports
The downloads.xiph.org master site requires TLS1.3, which is not
supported by FreeBSD 11's OpenSSL and fetch(1). Add ftp.osuosl.org
as a backup to all Xiph.org ports.
PR: 256515
Reported by: Daniel Engberg
Remove libogg.so.8, libvorbis.so.4 and libvorbisfile.so.6 compatibility
links that were added in r374303 to prevent massive PORTREVISION bumps.
Bump dependent ports that have not been bumped since.
Do not use post-stage. Use post-install instead.
The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.
PR: 214780
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
Apply FreeBSD 10 workaround for some high profile ports to
unbreak a lot of dependent ports.
Submitted by: beat
Tested on: pointyhat i386-9-exp and i386-10
Update to 1.2.0. Improvements in this release:
* Alter default flushing behavior to span less often and use larger page
sizes when packet sizes are large.
* Build fixes for additional compilers
* Documentation updates
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Update to 1.1.4. From the change log:
* New async error reporting mechanism. Calls made after a fatal error are
now safely handled in the event an error code is ignored
* Added allocation checks useful to some embedded applications
* fix possible read past end of buffer when reading 0 bits
* Updates to API documentation
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
(Only the first 15 lines of the commit message are shown above )
Back out to fix the patch, my mistake for test in wrong branch (tested in MC)
and I always thought that gnomehack is post-patch, which isn't and is in
pre-patch.
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Update to 1.1.2. Changes in this release:
* various bugfixes
* important bugfix for 64-bit platforms
* various portability fixes
* autotools cleanup from Thomas Vander Stichele
* new multiplexed Ogg stream documentation
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Update libao to 0.8.0, which breaks mpg321. Update libogg, libvorbis,
vorbis-tools and the vorbis meta-port to 1.0rc2. This version supports
"channel coupling" for more efficient compression of stereo material.
o update to 1.0 RC1. PORTEPOCH bumped due to PKGNAME now strictly follows
handbook. (1.0b4,1 > 1.0.r1,1 vs. 1.0b4,1 < 1.0.r1,2) o support
NOPORTDOCS. o remove stale MASTER_SITES.
Change maintainer for libao, libogg, libvorbis, and vorbis. Improve use of
autoconf and automake. Support NOPORTDOCS. Respect CFLAGS. Fix libvorbis
encoder on Alpha. Install documentation in proper places.
- Add pre-generated aclocal.m4, because aclocal sucks if several versions of
m4 macros for the same software installed (for example sld.m4 & sdl11.m4); -
use AUTOMAKE_ARGS.
Add AUTO{CONF,MAKE}_{ENV,ARGS}. Among other things, this will fix
audio/libao, audio/libogg, audio/libvorbis and audio/vorbis-tools which need
--add-missing to be passed to automake.
