gnetlist is the netlist extraction/generation program which is part
of gEDA (GPL Electronic Design Automation) toolset. This program takes a
schematic for its input and outputs a netlist. gnetlist uses scheme to define
the output format.
Currently it supports the following backends:
1) Allegro netlist format (-g allegro)
2) BAE netlist format (-g bae)
3) BOM / BOM2 - Bill of Materials (-g bom and -g bom2)
4) Partslist1,2,3 - More Bill of Materials (-g partslist[1-3])
5) DRC - Start of a design rule checker (-g drc)
6) DRC2 - A second design rule checker (-g drc2)
7) gEDA - native format, mainly used for testing (-g geda)
8) Gossip netlist format (-g gossip)
9) PADS netlist format (-g pads)
10) PCB / PCBboard (-g PCB and -g PCBboard)
11) gsch2pcb backend (-g gsch2pcb)
12) ProtelII netlist format (-g protelII)
13) Spice compatible netlist format (-g spice)
14) Enhanced spice compatible netlist format (-g spice-sdb)
15) Switcap netlist format (-g switcap)
16) Tango netlist format (-g tango)
17) Verilog code (-g verilog)
18) VHDL code (-g vhdl)
19) VIPEC netlist format (-g vipec)
20) Bartels Autoengineer netlist format (-g bae)
21) GOSSIP system simulation system netlist format (-g gossip)
22) MAXASCII netlist format (-g maxascii)
23) VHDL-AMS netlist format (-g vams)
24) Futurenet2 netlist format (-g futurenet2 )
25) SWITCAP switched capacitor simulator netlist format (-g switcap )
26) RF Cascade netlist format (-g cascade )
27) RACAL-REDAC netlist format (-g redac )
28) PCB actions file for forward annotating pin/pad names from
schematic to layout (-g pcbpins)
WWW: http://www.geda.seul.org
Remove expired ports:
2015-11-26 audio/pecl-id3: Broken for more than 6 months
2015-11-26 dns/geta: Broken for more than 6 months
2015-11-26 finance/openerp-web: Broken for more than 6 months
2015-11-26 devel/py-async: Further using of this module is not encouraged by
upstream
2015-11-26 chinese/kon2: Depends on expiring chinese/cce
2015-11-26 games/linux-skulltag: Depends on expiring audio/linux-fmodapi
2015-11-26 archivers/wzip: Broken for more than 6 months
2015-11-26 databases/sybtcl: Broken for more than 6 months
2015-11-26 biology/povchem: Broken for more than 6 months
2015-11-26 audio/btc: Broken for more than 6 months
2015-11-26 astro/wmglobe: Broken for more than 6 months
2015-11-26 graphics/pyro: Broken for more than 6 months
2015-11-26 graphics/jpeg2ps: Broken for more than 6 months
2015-11-26 chinese/gugod-clean: Broken for more than 6 months
(Only the first 15 lines of the commit message are shown above )
- Return my ports back to the pool. I was unable to make any fixes to
my ports in the past 3 weeks while ports were broken on any 10.x
machines, which means I'm unable to maintain them. So let people know
that there's no available support for them until things are back to
normal (which also means that anyone with spare time will be able
to fix them without getting approval).
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- Bump PORTEPOCH, this was missed in previous update [1].
- Use proper shebang line in perl and python scripts [1].
- Define INSTALLS_ICONS and USE_GETTEXT where appropriate.
- Implement WITHOUT_NLS knob.
Reported by: Nick Withers <nick@nickwithers.com> [1]
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
