Remove expired ports:
2013-12-22 devel/mico: Broken for more than 6 month
2014-01-22 cad/salome: depends on expired cad/salome-kernel
2014-01-22 cad/salome-netgenplugin: depends on expired cad/salome-kernel
2014-01-22 cad/salome-jobmanager: depends on expired cad/salome-kernel
2014-01-22 cad/salome-visu: depends on expired cad/salome-kernel
2014-01-22 cad/salome-kernel: does not configure
2014-01-22 cad/salome-multipr: depends on expired cad/salome-kernel
2014-01-22 cad/salome-smesh: depends on expired cad/salome-kernel
2014-01-22 cad/salome-gui: depends on expired cad/salome-kernel
2014-01-22 cad/salome-yacs: depends on expired cad/salome-kernel
2014-01-22 cad/salome-med: depends on expired cad/salome-kernel
2014-01-22 cad/salome-light: depends on expired cad/salome-kernel
2014-01-22 cad/salome-randomizer: depends on expired cad/salome-kernel
2014-01-22 cad/salome-sierpinsky: depends on expired cad/salome-kernel
2014-01-22 cad/salome-geom: depends on expired cad/salome-kernel
2014-01-22 devel/combat: depends on expired devel/mico

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Deprecate and schedule for removal on 2014-01-22, depends on expired
cad/salome-kernel.

PR:		ports/185111
Submitted by:	rene
Approved by:	maintainer timeout (devel@stasyan.com , 14 days)

Convert LIB_DEPENDS for ports depending on boost

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)

- Remove last vestiges of MAKE_JOBS_SAFE knob

Approved by:	portmgr (bapt)

- update libdg to 2.1.0

Fix extraction

Convert to new options framework left unconverted ports in c* categories

Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip

- Chase Qt upgrade;

- Chase VTK upgrade;

- Unbreak.

Credit: most of these patches have been sent by Roger Mason
(rmason (at) mun.ca) to the maintainer.

PR:		ports/174065
Submitted by:	/me
Approved by:	maintainer

add math/metis4 to math/Makefile; update math/metis to 5.0.2; add appropriate
CONFLICTS, LATEST_LINK, and PORTSCOUT; adjust dependent ports; explicitly
note the restrictive license of the metis ports (while here, append the MPI port
to
*DEPENDS in math/parmetis, rather than using an assignment)

PR:             169578

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- remove maintainer tags from pkg-descr

Approved by:    portmgr
Approved by:    bapt (mentor)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Bump PORTREVISION for science/hdf5-18 shlib change

- bump after update to graphviz-0.28

Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.

As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.

PR:             ports/154736

- Move over to python2.5 or higher
- While here kick md5

Update cad/salome* to 5.1.4.

Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
         successful _run_.

PR:             ports/152396
Submitted by:   maintainer (Stas Timokhin)

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Strictly depends on Gcc-4.4, even if the default FORTRAN compiler
depends on Gcc-4.5.

Submitted by:   Stas Timokhin <devel (at) stasyan.com> (maintainer)

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- Fix build with new vtk

Submitted by:   Stas Timokhin <devel@stasyan.com>

Switch from metis to metis-edf by default, so that Salome can be
installed on a machine where Code_Aster is already installed.

PR:             ports/146738
Approved by:    maintainer

- Unbreak (incorrect use of bsd.autotools.mk)

- Don't install useless documentation.

PR:             ports/143878
Submitted by:   Stas Timokhin <devel (at) stasyan.com> (maintainer)

- Chase math/vtk5 update

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains meta-port.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>