18:44 ehaupt 

Add uird, a Universal IR Receiver Daemon

PR:             89404
Submitted by:   lx@deepthought.redundancy.org

10:06 lawrance 

Add vpb-driver 2.4.9, device-driver for the Voicetronix OpenLine4 PCI
telephony cards.

This is a port of the 4.x driver from the vendor, for 5.x.

PR:             ports/77471
Submitted by:   Chris Forkin <chris@forkin.com>

01:57 jylefort 

Add p5-Fax-Hylafax-Client.

Fax::Hylafax::Client is a simple Perl client for the HylaFAX fax server
(www.hylafax.org). It communicates with the server directly through the FTP
protocol and thus does not require any HylaFAX software component to be
installed on the client machine.

WWW: http://search.cpan.org/~arak/Fax-Hylafax-Client-1.01/

PR:             ports/85954
Submitted by:   Tony Shadwick <tshadwick@oss-solutions.com>

05:46 lawrance 

Remove cdce

Forgotten by:   leeym

19:11 garga 

Add jerm 8094, communication terminal through serial and TCP/IP
interfaces.

PR:             ports/82633
Submitted by:   Shinsuke Matsui <smatsui@karashi.org>

14:58 pav 

The Yagi-Uda project is a set of programmes for designing, and optimising
Yagi-Uda antennas, with 2 or more elements, such as shown below.  Additionally,
a very simple program called dipole works with just a dipole, but its
functionality is limited.

PR:             ports/83737
Submitted by:   Diane Bruce <db@db.net>

21:13 pav 

nec2c is a translation of the NEC2 FORTRAN source code to the C language.
The translation was performed mostly "by hand" and a lot of modifications
to the original program were introduced in order to modernize the NEC2
and to remove as many built-in limitations as possible. The attendant
SOMNEC program was also translated to C and incorporated in nec2c as a
function so that Sommerfeld ground solutions are a part of the program.

PR:             ports/83392
Submitted by:   Diane Bruce <db@db.net>

10:47 jylefort 

Add splat.

SPLAT! is an RF Signal Propagation, Loss, And Terrain analysis tool for
the spectrum between 20 MHz and 20 GHz. Useful to Amateur Radio operators.

Written by John A. Magliacane, KD2BD

WWW: http://www.qsl.net/kd2bd/splat.html

PR:             ports/83164
Submitted by:   Diane Bruce <db@db.net>

15:30 pav 

Given two Maidenhead locators, calculates distance (qrb) and azimuth.

PR:             ports/82879
Submitted by:   Diane Bruce <db@db.net>

11:31 pav 

This is a program for translating mainhead grid squares to and from lat/long.
This is of most use to Amateur Radio operators but may be useful to GPS users.

PR:             ports/82862
Submitted by:   Diane Bruce <db@db.net>

22:22 pav 

Add spandsp, software fax library for Asterisk

PR:             ports/82642
Submitted by:   William Lloyd <wlloyd@slap.net>

22:44 pav 

NCID is a network based Caller ID package that contains a server to obtain the
CID information from a modem, and a client to display the CID information on a
computer, TiVo, text pager, or cell phone. Multiple clients are permitted.

PR:             ports/81954
Submitted by:   David <david@freshports.org>

20:50 jylefort 

Add linpsk.

This is a small PSK31 program that uses QT, and a soundcard as modem.

WWW: http://linpsk.sourceforge.net/

PR:             ports/81617
Submitted by:   Søren Straarup <xride@x12.dk>

21:50 pav 

This is a small PSK31 program that uses gtk and soundcard as modem.

PR:             ports/81637
Submitted by:   S?ren Straarup <xride@x12.dk>

21:36 pav 

Ann twpsk, an openmotif X psk31 client.

PR:             ports/81635
Submitted by:   Soren Straarup <xride@x12.dk>

19:43 sem 

Tools to handle Short Message Service

PR:             ports/80511
Submitted by:   Benny Kjrgaard <benny@catpipe.net>

15:45 vs 

Add cwdaemon 0.9.2, an amateur Radio cw (morse code) keyer daemon:

Cwdaemon is a small daemon which uses the pc parallel or serial port and a
simple transistor switch to output morse code to a transmitter from a text
message sent to it via the udp internet protocol.

PR:             ports/74772
Submitted by:   Diane Bruce <db AT db.net>

10:57 mr 

Add the pyla Hylafax client 1.1.4 for sending receiving
and managing faxes via hfaxd.
For more information see: http://www.teamsw.it/pyla/

23:47 pav 

CDC Ethernet driver (driver for USB Linux-based PDAs: Sharp Zaurus, YOPY, etc).

Currently the driver is maintained out-of-tree as a set of files to be
downloaded and built manually.

PR:             ports/76802
Submitted by:   Craig Boston <craig@yekse.gank.org>

20:10 pav 

Add hcidump, utility similar to tcpdump, but operating on Bluetooth stack.
This was ported to FreeBSD by emax and neglected by ports people for too long.

22:39 pav 

Add bfhist, statistics generator for BinkleyForce FTN mailer.

PR:             ports/74405
Submitted by:   lan31 <lan31@sec.bank-enisey.ru>

21:51 pav 

Add tlf, an amateur radio curses based logging program.

PR:             ports/69166
Submitted by:   Diane Bruce <db@heceta.db.net>

22:35 pav 

Add qsstv, SSTV decode and Version 5 supports FAX reception

PR:             ports/73018
Submitted by:   Diane Bruce <db@db.net>

11:17 hq 

RXTX: serial and parallel I/O libraries supporting Sun's CommAPI. Open-source
implementation of the Java Communications API. Native interface to serial ports
in Java.

PR:             65396
Submitted by:   Jean-Baptiste Quenot <jb.quenot@caraldi.com>
Reviewed by:    glewis
Approved by:    glewis (mentor)

22:07 pav 

Add TrustedQSL, an Amateur Radio Station electronic trusted logbook

The mission of the Trusted QSL Group is to keep eQSL an open and free
activity for amateur radio operators by promoting the
Digital Signature Standard (DSS).

PR:             ports/70643
Submitted by:   Diane Bruce <db@db.net>

13:25 arved 

Add Klog, an amateur radio logging program for KDE

PR:             68689
Submitted by:   Matt Dawson <matt@mattsnetwork.co.uk>

00:21 markus 

Add cutecom 0.0.5, a graphical serial terminal.

16:09 pav 

Add linrad, Amateur Radio DSP utility (SDR)

PR:             ports/68873
Submitted by:   Diane Bruce <db@heceta.db.net>

20:15 pav 

Add xastir, a hamradio orientated GIS package designed to handle APRS.
APRS is Amateur Position Reporting System.  It's a system for handling
real time information across radio and internet links.

PR:             ports/68655
Submitted by:   Carl Makin <carl@stagecraft.cx>

08:52 pav 

Add nasawash, Amateur Radio program for cleaning NASA format keplerian
element files

PR:             ports/68649
Submitted by:   Diane Bruce <db@heceta.db.net>

23:28 pav 

Add echolinux, an EchoLink client for UNIX.

PR:             ports/68587
Submitted by:   Diane Bruce <db@night.db.net>

21:37 pav 

Add nokryptia, a program to convert music files like MP3 to work
on a Nokia 5510 cell phone.

PR:             ports/68565
Submitted by:   Aleksander Fafula [alex@fafula.com]

11:45 vs 

Add cdr_read 1.09, utility for reading of the call detail records from
PBX.

PR:             ports/68271
Submitted by:   Konstantin Reznichenko <kot@premierbank.dp.ua>

13:56 pav 

Add thebridge, an amateur radio EchoLink compatible conference bridge
reimplementation for UNIX

PR:             ports/68350
Submitted by:   Diane Bruce <db@db.net>

21:52 pav 

Add predict, a ncurses application to predict and track positions of amateur
radio satellites.

PR:             ports/68283
Submitted by:   Diane Bruce <db@db.net>

23:40 kris 

Remove expired ports, plus the three ports that depended on them.

08:29 vs 

Add pstngw 1.2.2, simple H.323-PSTN (POTS) gateway.

PR:             ports/63024
Submitted by:   Jakub Klausa <jacke@bofh.pl>

01:31 pav 

Add qicosi after repocopy from qico. Qicosi is ifcico-like ftn mailer,
supporting all modem and ip fido protocols.

PR:             ports/67320
Submitted by:   Andrey Slusar <vasallia@ukr.net>
Repocopy by:    marcus

13:20 pav 

Add xdx, a DX cluster client with the same look and feel as xlog.

PR:             ports/67037
Submitted by:   Matt Dawson <matt@mattsnetwork.co.uk>

22:54 clement 

Add efax-gtk 2.2.5, GUI front end for the efax fax program.

This program is a Gtk+/Gtkmm front end for the efax program for
receiving and sending faxes with a fax modem.  Any files to be faxed
must be in postscript format, which is the generic printer format for
Unix/Linux systems. The program will use ghostscript to convert these
into the Group 3 fax format which the fax modem will understand.

WWW: http://www.cvine.freeserve.co.uk/efax-gtk/

PR:             ports/63844
Submitted by:   Jean-Baptiste Quenot <jb.quenot@caraldi.com>

07:29 kris 

Remove category pkg/COMMENT files in favour of a COMMENT variable in the
category makefile.

Submitted by:   Matthew Seaman <m.seaman@infracaninophile.co.uk>
PR:             59651

21:29 pav 

Add aldo, a Morse code tutor.  At the moment it has four kinds of
exercises: Classic exercise, the Koch method, Callsign exercise, and
exercises read from files.

PR:             ports/64358
Submitted by:   Scott Lambert <lambert@lambertfam.org>

20:01 pav 

Add obexapp, a utility written by Maksim Yevmenkin (emax@FreeBSD.org)
to transport files over OBEX protocol. This only works for Bluetooth
and needs -CURRENT as of January 20 or newer (sdpd import) to work,
so IGNORE on 5.2.1-R and older.

PR:             ports/64597
Submitted by:   Guido Falsi <mad@madpilot.net>

19:57 pav 

Add openobex, a library for OBEX (Object Exchange), a protocol to exchange
a data over infrared and Bluetooth.

This port is adapted to work with FreeBSD Bluetooth stack.

PR:             ports/64596
Submitted by:   Guido Falsi <mad@madpilot.net>

22:21 patrick 

Create a new port for xtt516, a GUI for controlling the TenTec 516 ham radio

21:56 pav 

Grig is a graphical front-end to the Ham Radio libraries
written using Gtk+ and Gnome widgets by Alexandru Csete.

Part of the grounstation suite, it purpose is to control
an amateur radio transceiver from X. It supports any of
the transceivers that hamlib supports, including rpc.rigd
over the network. However, at present only a subset of the
hamlib functions are provided.

The groundstation suite comprises Gnome-rig and Gnome-predict
and is intended to provide a low-cost amateur radio station
with the facilities of a high-end satellite station.

WWW: http://groundstation.sourceforge.net/

PR:             ports/61729
Submitted by:   Matt Dawson <matt@mattsnetwork.co.uk>

19:15 pav 

Gpredict is a satellite tracking and prediction application
written using Gtk+ and Gnome widgets by Alexandru Csete.

Part of the grounstation suite, its purpose is to track
the various amateur, weather and military satellites that
are of interest to radio amateurs.

The groundstation suite comprises Gnome-rig and Gnome-predict
and is intended to provide a low-cost amateur radio station
with the facilities of a high-end satellite station.

WWW: http://groundstation.sourceforge.net/

PR:             ports/61727
Submitted by:   Matt Dawson <matt@mattsnetwork.co.uk>

06:41 perky 

Add port for py-lirc 0.0.4,
An infra-red remote controller library interface for Python.

PR:             60989
Submitted by:   Lewis Thompson <purple@lewiz.net>

20:39 pav 

Add gammu, a command-line program to communicate with Nokia cell phones
over cable, infra and Bluetooth.

PR:             ports/60211
Submitted by:   Kirill Bezzubets <kirill@solaris.ru>

05:22 linimon 

Add comms/qtpcr, software that controls the ICOM PCR-1000 Receiver.

PR:             ports/52319
Submitted by:   Sebastian Yepes <esn@x123.info>

12:37 pav 

Add py-bulksms, python client for BulkSMS.co.uk's HTTP API for sending
short text messages to cell phones. Port contains python module
and a command-line client 'sms'.

PR:             ports/59987
Submitted by:   Andy Gilligan <andy@evo6.org>

19:07 pav 

Add hamfax, a Qt/X11 application for sending and receiving facsimiles
over ham radio.

PR:             ports/53444
Submitted by:   Carl Makin <carl@stagecraft.cx>

06:01 kris 

As announced on Aug 7, remove this broken port.

05:21 edwin 

New port for libirman 0.4.2

        This is a new port for the libirman library for use with
        Evation's Irman infrared reciever.

PR:             ports/50443
Submitted by:   Douglas K. Rand <rand@meridian-enviro.com>

11:04 edwin 

new port: comms/gscmxx 0.4.1 - gtk-frontend for scmxx

        gscmxx can access siemens cellular phones via scmxx. it
        supports phonebooks, addressbooks, sms and some other
        features.

PR:             ports/52176
Submitted by:   Sven Mohr <svmohr@red-mercury.de>

01:31 edwin 

New port: comms/lirc: Linux Infared Remote Control

        This is a port of the LIRC, Linux Infrared Remote Control,
        package (www.lirc.org). This port installs the daemons and
        tools for interacting with device drivers that support the
        LIRC device interface. The port does not install any FreeBSD
        infrared device drivers yet; the user must obtain these
        from third parties or port the existing Linux drivers.

PR:             ports/46774
Submitted by:   Mike Heffner <mikeh@FreeBSD.org> <mheffner@acm.vt.edu>

19:35 oliver 

Add garmin-utils 1.93, utilities for Garmin GPS receivers.

PR:             57585
Submitted by:   Matthew Braithwaite <mab@red-bean.com>

11:03 edwin 

[new port] TiLP: TI calculator link program

        TiLP is a Linking Program to send/receive files to/from
        your TI calculator.

PR:             ports/56137
Submitted by:   Tijl Coosemans <tijl@ulyssis.org>

10:49 edwin 

[new port] libticables: TI calculator link cables

        Libticables is part of TiLP, a program to connect a TI
        calculator to your computer. This lib manages several types
        of cables (serial, parallel, usb).

PR:             ports/56134
Submitted by:   Tijl Coosemans <tijl@ulyssis.org>

21:49 arved 

Add kallers, A KDE applet that shows caller ID information

PR:             50046
Submitted by:   Scott A. Moberly <smoberly@karamazov.org>

22:41 anders 

Add Device::Modem, a Perl module to talk to AT compliant devices via
serial ports.

16:32 nsayer 

New port for Device::SerialPort

17:18 marcus 

Add gmfsk, a GNOME a multi-mode soundcard terminal program for HF amateur
communications.

PR:             53442
Submitted by:   Carl Makin <carl@stagecraft.cx>

12:19 patrick 

Add hamlib 1.1.4,
shared libraries for Amateur Radio Equipment
Control Applications.

PR:             51638
Submitted by:   Sebastian Yepes <esn@x123.info>

16:07 knu 

Add ruby-serialport, a Ruby library to communicate via the RS232 port.

10:30 fjoe 

New port: bforce -- simple ifcico like Fidonet technology mailer.

Submitted by:   Vladimir Kurtikov <vk@vk.pp.ru>

11:16 edwin 

new port: comms/bforce-kst

        BinkleyForce is a simple ifcico like FTN mailer. It can
        works via TCP/IP as well as on modem links. Look sample
        configs for more information.

PR:             ports/38635
Submitted by:   Andrew Dolgov <fox@sigsegv.spb.ru>

20:28 knu 

Sort entries.

07:33 marcus 

Add gfax, a GTK+ front-end to hylafax.

PR:             34103
Submitted by:   John Merryweather Cooper <john_m_cooper@yahoo.com>

19:14 patrick 

Create port for xlog, an amateur radio logging app

00:30 patrick 

Create a port for kpsk, a PSK-31 radio package for amateur radio users

08:31 ijliao 

add scmxx 0.6.1.5
Data exchange utility for Siemens mobile phones

PR:             39707
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

19:44 znerd 

New port: Java Communication API, FreeBSD implementation.

PR:             31689
Submitted by:   Ari Suutari <ari.suutari@syncrontech.com>

08:33 znerd 

New port: Java Communications API.

PR:             31688
Submitted by:   Ari Suutari <ari.suutari@syncrontech.com>

13:31 naddy 

Import of wy60 2.0.2:
A curses-based emulator for the Wyse 60 terminal.

04:53 petef 

Add acfax 0.981011, recieve faxes using sound card and radio.

PR:             34792
Submitted by:   Darren <igla@batterybackups.net>

11:13 mita 

Simple and useful FAX frontend program working with efax.

Submitted by:   me. ports-jp 12772

11:10 mita 

This is yet another FAX send/receive program.
Can handle class1 modems. Works nicely.

Submitted by:   me. ports-jp 12772

20:14 ijliao 

add gsmlib 1.8
A library to access GSM mobile phones through GSM modems