R-cran-foreach Foreach looping construct for R
1.4.4 devel =1

Maintainer: tota@FreeBSD.org
Port Added: 04 Sep 2011 06:18:03
License: APACHE20

Support for the foreach looping construct. Foreach is an idiom that
allows for iterating over elements in a collection, without the use
of an explicit loop counter. This package in particular is intended
to be used for its return value, rather than for its side effects.
In that sense, it is similar to the standard lapply function, but
doesn't require the evaluation of a function. Using foreach without
side effects also facilitates executing the loop in parallel.

WWW: https://cran.r-project.org/web/packages/foreach/

SVNWeb : Homepage : PortsMon

Pseudo-pkg-plist information, but much better, from make generate-plist
Expand this list (3 items)

1. /usr/local/share/licenses/R-cran-foreach-1.4.4/catalog.mk
2. /usr/local/share/licenses/R-cran-foreach-1.4.4/LICENSE
3. /usr/local/share/licenses/R-cran-foreach-1.4.4/APACHE20
Collapse this list.

---

To install the port: cd /usr/ports/devel/R-cran-foreach/ && make install clean
To add the package: pkg install R-cran-foreach

PKGNAME: R-cran-foreach

distinfo:

TIMESTAMP = 1522049212
SHA256 (foreach_1.4.4.tar.gz) = c0a71090d5b70b9a95a6936091dabae9c26e1fc6b9609bfe5fb6346033905e48
SIZE (foreach_1.4.4.tar.gz) = 360705

---

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. R-cran-iterators>=1.0.0 : devel/R-cran-iterators
2. R : math/R

Runtime dependencies:

1. R-cran-iterators>=1.0.0 : devel/R-cran-iterators
2. R : math/R

This port is required by:

for Build

1. devel/R-cran-caret
2. devel/R-cran-doParallel
3. math/R-cran-NMF

for Run

1. devel/R-cran-caret
2. devel/R-cran-doParallel
3. math/R-cran-NMF

* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

---

Configuration Options

     No options to configure

---

USES:

cran:auto-plist

---

Master Sites:

1. http://camoruco.ing.uc.edu.ve/cran/src/contrib/
2. http://camoruco.ing.uc.edu.ve/cran/src/contrib/Archive/foreach/
3. http://cran.utstat.utoronto.ca/src/contrib/
4. http://cran.utstat.utoronto.ca/src/contrib/Archive/foreach/
5. https://cloud.r-project.org/src/contrib/
6. https://cloud.r-project.org/src/contrib/Archive/foreach/
7. https://cran.cnr.berkeley.edu/src/contrib/
8. https://cran.cnr.berkeley.edu/src/contrib/Archive/foreach/
9. https://cran.csiro.au/src/contrib/
10. https://cran.csiro.au/src/contrib/Archive/foreach/
11. https://cran.gis-lab.info/src/contrib/
12. https://cran.gis-lab.info/src/contrib/Archive/foreach/
13. https://cran.ism.ac.jp/src/contrib/
14. https://cran.ism.ac.jp/src/contrib/Archive/foreach/
15. https://cran.ma.imperial.ac.uk/src/contrib/
16. https://cran.ma.imperial.ac.uk/src/contrib/Archive/foreach/
17. https://mirror.las.iastate.edu/CRAN/src/contrib/
18. https://mirror.las.iastate.edu/CRAN/src/contrib/Archive/foreach/
19. https://mirrors.tuna.tsinghua.edu.cn/CRAN/src/contrib/
20. https://mirrors.tuna.tsinghua.edu.cn/CRAN/src/contrib/Archive/foreach/
21. https://stat.ethz.ch/CRAN/src/contrib/
22. https://stat.ethz.ch/CRAN/src/contrib/Archive/foreach/

- Update to 1.4.4

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 1.4.3
- Update WWW in pkg-descr

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Update to 1.4.2

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

- rename AL2 to APACHE20 in Mk/bsd.licenses.db.mk
- svn move Templates/Licenses/AL2 Templates/Licenses/APACHE20
- add APACHE10 and APACHE11 to Mk/bsd.licenses.db.mk
- add entry in UPDATING
- bulk change all ports AL2 => APACHE20

- math/openfst/pkg-plist: remove share/licenses/openfst-1.3.4

PR:		ports/184785
Submitted by:	ohauer
Reviewed by:	tabthorpe
Approved by:	portmgr (tabthorpe@)

Convert Mk/bsd.cran.mk to the Uses framework.

PR:		ports/184699
Reviewed by:	bapt
Approved by:	portmgr (bdrewery), wen (maintainer, timeout > 2 weeks)

Add stage support to Mk/bsd.cran.mk and all USE_R_MOD ports (aka R-cran-*).

Since this patch converts all affected ports, bsd.cran.mk no longer supports
NO_STAGE and errors out if NO_STAGE is set.

Exp-run:	ports/184216
Reviewed by:	bdrewery
Approved by:	portsmgr, wen

Update math/R to 3.0.2 patched r64207 and math/R-cran-SuppDists to 1.1-9.1;
adjust dependent ports

Reviewed by:	pfg, thierry, tota

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Update to 1.4.1
- Replace tab with a space after WWW: in pkg-descr

Update math/R to 3.0.1-patched, and adjust dependent ports;
synchronize math/rpy with upstream repository

Reviewed by:	wen
Approved by:	wen, tota

update math/R to 2.15.3, and adjust dependent ports

update the R base ports to 2.15.2 and adjust dependent ports

Reviewed by:	thierry, tota, wen

update math/R to 2.15.1, switch to the new options format, and
adjust dependent ports

- update math/R-cran-psych to 1.2.1 [1]
- update math/R to 2.15.0, and adjust dependent ports
- minor changes to bsd.cran.mk [2]: rename MASTER_CRAN_SITES to
  MASTER_SITE_CRAN, as in bsd.sites.mk; make the install target more
  flexible and allow CRAN ports to override it; add a regression-test
  target; set USE_FORTRAN to match math/R; remove some of the
  redundant checks of USE_R_MOD; honor NOPORTDATA and NOPORTDOCS

Reviewed by:    thierry, tota, wen
Approved by:    D. Rue (maintainer) [1], wen [2]

- Update to 1.4.0

- Update to 1.3.5

Feature safe:   yes

- Update to 1.3.4

Feature safe:   yes

update math/R to 2.14.2, and adjust dependent ports

update math/R to 2.14.1, and adjust dependent ports

- The proper acronym for Apache Software License 2 is really AL2
- Thanks to crees@ for generating the initial patch

PR:             ports/163521
Submitted by:   Pedro Giffuni <pfg apache.org>
Hat:            portmgr
Exp run by:     pav

update math/R to 2.14.0, math/R-cran-sp to 0.9-91, and adjust
dependent ports

Approved by:    linimon (portmgr), thierry, tota, wen
Feature safe:   yes

- Move PKGNAMEPREFIX defined in each R-cran- related ports Makefile
  to Mk/bsd.cran.mk

PR:             ports/162238
Submitted by:   tota (myself)
Approved by:    wen (maintainer of Mk/bsd.cran.mk and many related ports),
                David Naylor <naylor_DOT_b_DOT_david_AT_gmail_DOT_com>
                  (maintainer of math/R-cran-RSvgDevice and math/R-cran-car),
                Dan Rue <drue_AT_therub_DOT_org>
                  (maintainer of math/R-cran-psych, timeout > 2 weeks)
Feature safe:   yes

update math/R to 2.13.2, and adjust dependent ports

- Add a new port: devel/R-cran-foreach

  Support for the foreach looping construct. Foreach is an idiom that
  allows for iterating over elements in a collection, without the use
  of an explicit loop counter. This package in particular is intended
  to be used for its return value, rather than for its side effects.
  In that sense, it is similar to the standard lapply function, but
  doesn't require the evaluation of a function. Using foreach without
  side effects also facilitates executing the loop in parallel.

  WWW:  http://cran.r-project.org/web/packages/foreach/

14 vulnerabilities affecting 116 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-06-16 15:43:50