Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Fix build with PHP 8.0

Fix build with PHP 7.4

Add pecl-expect 0.4.0

Remove expired ports:
2018-12-30 net/pecl-mosquitto: Works only with EOL php 5.6
2018-12-30 net/pecl-ip2location: Works only with EOL php 5.6
2018-12-30 net/pecl-yp: Works only with EOL php 5.6
2018-12-30 net/pecl-oauth: Works only with EOL php 5.6
2018-12-30 net/pecl-apn: Works only with EOL php 5.6
2018-12-30 textproc/pecl-doublemetaphone: Works only with EOL php 5.6
2018-12-30 textproc/pecl-ctemplate: Works only with EOL php 5.6
2018-12-30 textproc/pecl-xslcache: Works only with EOL php 5.6
2018-12-30 textproc/libmrss-php: Works only with EOL php 5.6
2018-12-30 textproc/pecl-stem: Works only with EOL php 5.6
2018-12-30 textproc/pecl-wbxml: Works only with EOL php 5.6
2018-12-30 textproc/pecl-syck: Works only with EOL php 5.6
2018-12-30 textproc/pecl-yaml1: Works only with EOL php 5.6
2018-12-30 deskutils/surrealtodo: Works only with EOL php 5.6

Remove version 7.0 from the IGNORE_WITH_PHP list.

Deprecate ports depending on php 5.6

Fix some PKGNAME collisions

Add missing IGNORE_WITH_PHP for various pecl-ports.

After testing every pecl-* port with PHP 5.6, 7.0, 7.1 and 7.2
i set the IGNORE_WITH_PHP accordingly to the fallout.

PR:          222165
Reported by: brnd
Approved by: portmgr (blanket)
Differential Revision: https://reviews.freebsd.org/D13476

-	Update maintainer address

Reviewed by:	miwi (mentor)
Differential Revision:	https://reviews.freebsd.org/D10755

Convert all PECL ports to USES=php:pecl.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D10281

- Pass maintainership to submitter

PR:		215489
Submitted by:	joneum@bsdproject.de

- Update WWW: pecl.php.net uses https://

Approved by:	portmgr (blanket)

Don't use extension.ini any more, and have each extension install in its
file, so the order remains the same.

Every PHP (or Zend) extension now installs its own .ini file in
/usr/local/etc/php.  A PHP extension will be automatically activated
when installed.  The order into which extensions are loaded is
automatically guessed.  In some very rare cases, the guess will be
wrong, and PHP_MOD_PRIO will need to be set.  Refer to the USES=php
section of the Porter's Handbook for more information.

Convert ports touching etc/php/extensions.ini manually, or telling the
OP to do it.

And finally, bump PORTREVISION for all php extensions.

PR:		210697
Submitted by:	mat
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D7022

Reset miwi@'s ports, he stepped down from the Ports Team.

With hat:	portmgr-secretary

Convert USE_PHP*=yes into USES=php*

PR:		210529
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D6936

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

lang/expect: update to 5.45.3, bump PORTREVISION on dependent ports

- Ignore php70
- While here remove old php gruft

- Take Maintainership

Approved by:	mat (mentor)

Upgrade to 0.3.3.

bsd.php.mk handle ${STRIP} already, remove prev patches.

strip binary.

switch to USES=tar:tgz

Upgrade to 0.3.1.

Reset miwi's maintainership per his demand

Hope to see you back! Thank for all the work!

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.

CR:		D196
Approved by:	portmgr (bapt)

- Bump PORTREVISION after lang/expect update

Suggested by:	mat

- Chase devel/expect update

- Marke these ports as stage safe
- While here remove php4 gruft

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Trim header

- Update to 0.2.9

* Add LICENSE
* Remove MD5 line from distinfo.
* Add IGNORE_WITH_PHP=4

PR:             152995
Submitted by:   "Tom Judge" <tom@tomjudge.com>

- Update to 0.2.7

- Update to 0.2.6

- Take maintainership

Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.

Hat:            portmgr

Fix build with custom LOCALBASE.

Reported by:    QATty
Approved by:    portmgr (itetcu@)

- Update to 0.2.5

- Update to 0.2.4

- Update to 0.2.3.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Change the following ports to my FreeBSD.org email.
Approved by:    delphij (mentor)

archivers/pecl-bz2/Makefile
archivers/pecl-lzf/Makefile
archivers/pecl-rar/Makefile
audio/fapg/Makefile
audio/pecl-id3/Makefile
chinese/CJKUnifonts/Makefile
chinese/auto-tw-l10n/Makefile
chinese/dfsongsd/Makefile
chinese/fortunetw/Makefile
chinese/gcin/Makefile
chinese/joe/Makefile
chinese/joe2/Makefile

Add pecl-expect 0.2.2, a PHP extension for expect library.

PR:             ports/102167
Submitted by:   chinsan <chinsan.tw at gmail.com>